单选题A tape drive containing a jammed tape must be taken off-site to be repaired. Which of the following should be considered FIRST？（）ADowntime necessary to reinstall the repaired driveBData security policies and proceduresCPotential cooling problems due to

题目
单选题
A tape drive containing a jammed tape must be taken off-site to be repaired. Which of the following should be considered FIRST？（）
A

 Downtime necessary to reinstall the repaired drive

B

 Data security policies and procedures

C

 Potential cooling problems due to the missing drive

D

 Redundant or replacement data backup solutions

相似考题

1.You are the administrator of a SQL Server 2000 computer. The server contains your company's order processing database. Two-hundred operators take orders by telephone 24 hours a day. Threehundred data entry personnel enter data from orders received by mail.To ensure that order data will not be lost, your company's disaster recovery policy requires that backups be written to tape. Copies of these tapes must be stored at an off-site company location. Orders must be entered into the database before they can be filled. If the server fails, you must be able to recover the order data as quickly as possible.You need to create a backup strategy that meets the company requirements and minimizes server workload. Which two actions should you take? (Each correct answer represents part of the solution. Choose two.)A．Perform. a combination of full database and filegroup backups.B．Perform. a combination of full database and file backups.C．Perform. a combination of full database, differential, and transaction log backups.D．Back up the data to a local tape drive.E．Back up the data to a network share, and then use enterprise backup software to write the disk backups to tape.

2. A company has recently upgraded all backup hardware and media from DLT IV to LTO3 tapes and tape drives. Several weeks after the upgrade， the development team discovers a corruption in one of the application servers and must restore from one of the DLT IV tapes.  Which of the following steps arenecessary for the server administrator to use these tapes？（）A、 Reformat the DLT IV tape in LTO3 format. Load the tape.B、 Install the DLT IV driver on the LTO3 drive. Load the tape.C、 Load the DLT IV tape into the LTO3 drive.D、 Replace the LTO3 drive with a DLT IV tape drive. Load the tape.

3. You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has a backup tape drive installed. You need to schedule a backup to tape. The tape must be ejected when the backup job is complete. Which commands should you include in the scheduled task? （）A、Devcon.exe and Poolmon.exeB、Ntbackup.exe and Devcon.exeC、Ntbackup.exe and Rsm.exeD、Rsm.exe and Poolmon.exe

4.An operator is asked to rewind and eject a tape from a system. Which command will accomplish this without touching the tape drive?()A. tctl resetB. tctl rewindC. tctl returnD. tctl rewoffl

更多“A tape drive containing a jammed tape must be taken off-site”相关问题

  • 第1题：

    Which backup solution is the MOST appropriate for backing up a payload from a corporation with multiple servers and approximately 300 GB of data？（）

    • A、 multiple AIT （Advanced Intelligent Tape） drives configured for each server
    • B、 a standalone LTO （Linear Tape-Open） drive configured for all servers
    • C、 standalone DAT （Digital Audio Tape） drives configured for each server
    • D、 a tape library unit with more then one DAT （Digital Audio Tape） drive configured for all servers
    • E、 a tape library unit with more the one SDLT （SuperDLT） drive configured for all servers

    正确答案:E

  • 第2题：

    A SAN attached production file server is required to be backed up nightly according to company  policy.Recently the data to be backed up has increased to approximately 4TB. Currently， the server has a single attached LTO2 tape drive.  Which of the following should the server administrator do to provide enough backup capacity for the nightly job？ （）

    • A、 Replace the backup software with a more efficient application.
    • B、 Reduce the amount of data to be backed up.
    • C、 Replace the LTO2 tape drive with an LTO3 tape drive.
    • D、 Replace the single tape drive with a tape library.

    正确答案:D

  • 第3题：

    A tape library can be defined as which of the following？（）

    • A、 A way to catalog tapes after a tape backup to easily identify and retrieve data.
    • B、 A modular tape backup system containing multiple drives， tapes， and connections.
    • C、 A database consisting of all backups performed and the contents of each backup.
    • D、 An offsite storage facility to house tapes in case of a disaster for easy site recovery.

    正确答案:B

  • 第4题：

    When doing the Solution Assurance for a p5 570 with several LPARs, it is discovered that the customer plans to back the system up using mksysb. The customer would like to do unattended automated system backups and incorporate them into their off-site data recovery system. Which mksysb solution should be implemented?（）

    • A、A local DVD-ROM drive
    • B、A NFS mount on a NIM Master
    • C、A SSA disk array and mirror the data
    • D、A local tape drive and use DLPAR to move the tape to each LPAR

    正确答案:B

  • 第5题：

    A System p administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect.  Which of the following commands can be used to determine the block size of the backup tape （）

    • A、dd
    • B、tar
    • C、cpio
    • D、restore

    正确答案:A

  • 第6题：

    What must be done to make a shared tape drive highly available？（）  

    • A、 Ensure the rmt numbers are unique per node.
    • B、 Nothing，because HACMP manages the state of the tape drive.
    • C、 Nothing，because highly available tape devices are not supported.
    • D、 Ensure that the tape device is in a defined state after system startup.

    正确答案:D

  • 第7题：

    单选题
    A tape library can be defined as which of the following？（）
    A

     A way to catalog tapes after a tape backup to easily identify and retrieve data.

    B

     A modular tape backup system containing multiple drives， tapes， and connections.

    C

     A database consisting of all backups performed and the contents of each backup.

    D

     An offsite storage facility to house tapes in case of a disaster for easy site recovery.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A SAN attached production file server is required to be backed up nightly according to company  policy.Recently the data to be backed up has increased to approximately 4TB. Currently， the server has a single attached LTO2 tape drive.  Which of the following should the server administrator do to provide enough backup capacity for the nightly job？ （）
    A

     Replace the backup software with a more efficient application.

    B

     Reduce the amount of data to be backed up.

    C

     Replace the LTO2 tape drive with an LTO3 tape drive.

    D

     Replace the single tape drive with a tape library.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has a backup tape drive installed. You need to schedule a backup to tape. The tape must be ejected when the backup job is complete. Which commands should you include in the scheduled task? （）
    A

    Devcon.exe and Poolmon.exe

    B

    Ntbackup.exe and Devcon.exe

    C

    Ntbackup.exe and Rsm.exe

    D

    Rsm.exe and Poolmon.exe


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Tape streaming is not happening while performing RMAN tape backup. On investigation， you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough. What could be a solution to make tape streaming happen during the backup？（）
    A

     Configure backup optimization

    B

     Configure the channel to increase MAXOPENFILES

    C

     Configure the channel to increase the capacity with the RATE parameter

    D

     Configure the channel to adjust the tape buffer size with the BLKSIZE option


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape.  Which of the following actions will enable the creation of the partitions with minimal intervention？（）
    A

    Install a VIO partition to share the tape drive.

    B

    Purchase three external SCSI adapters and physically move the tape drive when needed.

    C

    Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.

    D

    Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）
    A

     SCSI cable

    B

     SCSI interface adapter on the tape library

    C

     SCSI termination card on the server

    D

     iSCSI cable


    正确答案： B
    解析： 暂无解析

  • 第13题：

    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

    • A、 SCSI cable
    • B、 SCSI interface adapter on the tape library
    • C、 SCSI termination card on the server
    • D、 iSCSI cable

    正确答案:A

  • 第14题：

    A tape drive containing a jammed tape must be taken off-site to be repaired. Which of the following should be considered FIRST?（）

    • A、Downtime necessary to reinstall the repaired drive
    • B、Data security policies and procedures
    • C、Potential cooling problems due to the missing drive
    • D、Redundant or replacement data backup solutions

    正确答案:B

  • 第15题：

    A customer is acquiring a new IBM System Storage TS3500 Tape Library and requested to reuse four HP LTO-3 drives installed in a Sun L700 tape library to take advantage of the IBM multipath architecture. What action should the storage specialist take?（）

    • A、requestTechline support for help configuring the TS3500 with merged IBM and non-IBM LTO tape drives
    • B、propose a TS3500 with IBM LTO-5 tape drives and explain the benefit of using IBM control path failover
    • C、propose a TS3500 with IBM LTO-5 tape drives and include a special feature code to include non-IBM LTO tape drives
    • D、propose a TS3500 with LTO-5 tape drives and include non-IBM LTO tape drive support in the installation services proposal

    正确答案:B

  • 第16题：

    下面哪项产品支持磁带驱动器加密功能？（）

    • A、IBM Tape product with 3590 or LTO4 Drive
    • B、IBM Tape product with 3592 or LTO4 Drive
    • C、IBM Tape product with 3592 or LTO3 Drive
    • D、IBM Tape product with 3590 or LTO3 Drive

    正确答案:B

  • 第17题：

    A system administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape？（）

    • A、dd
    • B、tar
    • C、cpio
    • D、restore

    正确答案:A

  • 第18题：

    单选题
    A company has recently upgraded all backup hardware and media from DLT IV to LTO3 tapes and tape drives. Several weeks after the upgrade， the development team discovers a corruption in one of the application servers and must restore from one of the DLT IV tapes.  Which of the following steps arenecessary for the server administrator to use these tapes？（）
    A

     Reformat the DLT IV tape in LTO3 format. Load the tape.

    B

     Install the DLT IV driver on the LTO3 drive. Load the tape.

    C

     Load the DLT IV tape into the LTO3 drive.

    D

     Replace the LTO3 drive with a DLT IV tape drive. Load the tape.


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    When doing the Solution Assurance for a p5 570 with several LPARs, it is discovered that the customer plans to back the system up using mksysb. The customer would like to do unattended automated system backups and incorporate them into their off-site data recovery system. Which mksysb solution should be implemented?（）
    A

    A local DVD-ROM drive

    B

    A NFS mount on a NIM Master

    C

    A SSA disk array and mirror the data

    D

    A local tape drive and use DLPAR to move the tape to each LPAR


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough. What could be a solution to make tape streaming happen during the backup?（）
    A

    Configure backup optimization

    B

    Configure the channel to increase MAXOPENFILES

    C

    Configure the channel to increase the capacity with the RATE parameter

    D

    Configure the channel to adjust the tape buffer size with the BLKSIZE option


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    What must be done to make a shared tape drive highly available？（）
    A

     Ensure the rmt numbers are unique per node.

    B

     Nothing，because HACMP manages the state of the tape drive.

    C

     Nothing，because highly available tape devices are not supported.

    D

     Ensure that the tape device is in a defined state after system startup.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A support specialist started to apply an APAR on a system by inserting the tape into the tape drive， and loaded the fix using smitty installp. The following error message is displayed： tape not in backup format   Which of the following will resolve this problem？（）
    A

    Change density setting to 2

    B

    Set tape device to /dev/rmt0

    C

    Set block size to 0 for variable

    D

    Enable compression on tape device


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    An operator is asked to rewind and eject a tape from a system. Which command will accomplish this without touching the tape drive?（）
    A

    tctl reset

    B

    tctl rewind

    C

    tctl return

    D

    tctl rewoffl


    正确答案： C
    解析： 暂无解析

相关内容