单选题Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 -

第1题：

Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）

• A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. 
• B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.
• C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.
• D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.

第2题：

Company.com wants to reassign a host bus adapter （HBA） from one partition to another to  handle increased I/O workload on that partition. What needs to be done to dynamically move the card？（）

• A、Use the rmdev command to remove the card from the current partition before doing the DLPAR process.
• B、Take the source partition down and do the DLPAR function on the target partition.
• C、Assign the card to the required section of the target partition and run cfgmgr.
• D、Dynamically remove the card from the source and add to target profile then reactivate the target profile.

第3题：

A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）

• A、4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 
• B、Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 
• C、Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 
• D、Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server

第4题：

A system is being planned with three production partitions, one each for an IBM i, AIX standard edition, and Power Linux applications. One fibre-channel attached TS3100 tape library will be shared between the partitions for backup. Which solution provides tape library sharing with minimum operator intervention?（）

• A、Configure VIO Server Express Edition to control the tape library through one fibre channel card.Assign the  library to the production partitions when needed.
• B、Configure the IBM i partition to own the tape library.Use IBM i virtualization to host a virtual tape library  connection to the AIX and Linux partition.Assign the library to the production partitions when needed.
• C、Configure a fibre channel card for each partition， and a configure fibre switch.Connect the partitions and  tape library to the switch.Zone the switch so all partitions can enable the tape when needed and disable  the tape when finished.
• D、Configure AIX to control the tape library through one fibre channel adapter.Use AIX virtualization to host a  virtual tape library connection to the IBM i and Linux partitions.Assign the library to the production  partitions when needed.

第5题：

A customer is installing an HMC-managed Power 720 with two partitions, one for Production the other for Testing. They plan to use the Testing partition only occasionally and want to minimize hardware. Which of the following meets these requirements?（）

• A、Create a system profile for each partition. Assign all needed resources as 'required'.
• B、Define all system resources as 'desired' on the Testing partition. Activate only as needed.
• C、Create two shared processor pools. Assign the minimal I/O resources required for each partition to the shared pools.
• D、Create both partitions with minimal 'required' resources, and optional resources as 'desired'. Activate each partition as necessary.

第6题：

A company plans to deploy a two-enclosure, 23-core Power 780 system with AIX, IBM i and Linux in thefollowing configuration: 3 AIX partitions with dedicated network and disk adapters; 1 native IBM i partition acting as a host1 hosted IBM i partition; 2 hosted Linux partitions. Which configuration will provide boot disk capability to all partitions?（）

• A、Use dual-split backplane in both enclosures for the three AIX partitions and the IBMi partition.
• B、Put each partition on a dedicated controller using the triple-split backplane option in both enclosures.
• C、Use the triple-split backplane option in one enclosure for the AIX partitions, and the default dual-split  backplane for the IBMi partition in the second enclosure.
• D、Use the triple-split backplane option in one enclosure for the AIX partitions, and the non-split backplane  mode in the second enclosure for the IBMi hosting partition.

第7题：

第8题：

第9题：

第10题：

第11题：

第12题：

第13题：

Companycom is installing a Virtual IO Server to reduce the number of fibre channel adapters needed for each partition. The customer wants to use disk based copy functions to replicate the data on the LUNs. How can this be accomplished?（）

• A、Create LVM mirrors between LUNs
• B、MPIO is necessary as the device driver
• C、Use separate fibre adapters in the Virtual IO Server for each LUN
• D、Virtual IO Server is a disk subsystem and must control the LUNs behind it

第14题：

A small IT department is deploying Power 720 servers exploiting virtualization technologies.  Each Power 720 will have two partitions， one with 6 cores and one with 2 cores， and both partitions having 32GB of memory each. Live Partition Mobility is being considered at some point in the future. What is the minimum AIX Edition required to support the customer？（）

• A、AIX Basic Edition
• B、AIX Express Edition
• C、AIX Standard Edition
• D、AIX Enterprise Edition

第15题：

A customer plans to install ten Microsoft Windows servers, three Linux servers, and five AIX servers, with two Fibre Channel host bus adapters each as part of an IBM DS8700 implementation. What multipathing driver is required to build a redundant solution?（）

• A、RDAC
• B、MPIO
• C、SSPC
• D、SDDPCM

第16题：

A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）

• A、Fibre Channel Expansion Card for each Blade Server
• B、cKVM Card for each Blade Server
• C、iSCSI Expansion Card for each Blade Server
• D、4Gb Modular Flash Drive

第17题：

An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile?（）

• A、Add the fibre channel card as hared?Add the fibre channel card as ?hared?
• B、Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?
• C、Add the fibre channel card as esired?Add the fibre channel card as ?esired?
• D、Add the fibre channel card as equired?Add the fibre channel card as ?equired?

第18题：

Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 - partition one - required  SCSI adapter 01 - partition one - desired  IDE adapter 01 - partition one - required  Ethernet adapter 01 - partition one - required  Ethernet adapter 01 - partition two - required  SCSI adapter 02 - partition two - required  IDE adapter 01 - partition two - desired  Which of the following actions will enable the installation of the AIX image？（）

• A、Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.
• B、Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.
• C、Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.
• D、Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.

第19题：

第20题：

第21题：

第22题：

第23题：

第24题：