A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other serv

题目

A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）

  • A、 OSPF
  • B、 RIP
  • C、 FSPF
  • D、 VSANs
相似考题

1.An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs.For each given LPAR how should they add the PCI card to the LPAR profile?()A.Add the fibre channel card as hared?Add the fibre channel card as ?hared?B.Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?C.Add the fibre channel card as esired?Add the fibre channel card as ?esired?D.Add the fibre channel card as equired?Add the fibre channel card as ?equired?

2.Fibre Channel, or FC, is a gigabit-speed network technology primarily used for storage networking.Fibre Channel is standardized in the T11 Technical Committee of the InterNational Committee for Information Technology Standards (INCITS), an American National Standards Institute (ANSI) Caccredited standards committee.Which two of these correctly describe Fibre Channel?（）A. supports multiple protocolsB. works only in a shared or loop environmentC. allows addressing for up to 4 million nodesD. provides a high speed transport for SCSI payloads

3.In a Cisco Unified Computing System， where are SAN port channels connected to？（）A、 Only to Cisco Fibre Channel switchesB、 Only to Cisco Fibre Channel switches in NPIV modeC、 To any Fibre Channel switchD、 Directly to storage arraysE、 Only to Nexus Switches

4.Which path selection protocol is used by Fibre Channel fabrics?()A.IVRB.VoQC.FSPFD.VSANsE.SANTap

更多“A Fibre Channel̳”相关问题

  • 第1题：

    What is the use of NPV in Cisco Unified Computing Systems？ （）    

    • A、 Compatibility with third-party Fibre Channel switches
    • B、 Faster throughput
    • C、 Reduce domain IDs in a Fibre Channel environment
    • D、 Support for increased number of VSANs
    • E、 Support for SAN port channels

    正确答案:A,C

  • 第2题：

    Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）

    • A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. 
    • B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.
    • C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.
    • D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.

    正确答案:A

  • 第3题：

    Which statement about Cisco Unified Fabric switches is correct？ （）   

    • A、 The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
    • B、 The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. 
    • C、 The Nexus 7000 Series Switches can support the NPIV mode of operation， but cannot function as a complete Fibre Channel Forwarder.
    • D、 The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
    • E、 The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.

    正确答案:E

  • 第4题：

    Fibre channel requires which of the following elements？（）

    • A、 FC Initiator
    • B、 Multi-Mode fibre
    • C、 Physical Adapter
    • D、 Fibre Target Management Agent

    正确答案:C

  • 第5题：

    A customer is ready to order a pSeries solution.  However， the pSeries technical specialist is unsure whether the customer preferred the fibre channel or the external SCSI disk attachment option.  What is the most appropriate action for the specialist to take next？（）

    • A、Ask the customer to confirm which option is best for their environment.
    • B、Order the fibre channel option and purchase a converter later if necessary.
    • C、Order both SCSI and fibre channel adapters to cover both potential options.
    • D、Inform the customer that fibre channel was selected for performance reasons.

    正确答案:A

  • 第6题：

    An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile?（）

    • A、Add the fibre channel card as hared?Add the fibre channel card as ?hared?
    • B、Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?
    • C、Add the fibre channel card as esired?Add the fibre channel card as ?esired?
    • D、Add the fibre channel card as equired?Add the fibre channel card as ?equired?

    正确答案:C

  • 第7题：

    Which IBM tape interface architecture has the best performance and distance characteristics? （）

    • A、SAS
    • B、SCSI
    • C、ESCON
    • D、Fibre Channel

    正确答案:D

  • 第8题：

    单选题
    Fibre channel requires which of the following elements？（）
    A

     FC Initiator

    B

     Multi-Mode fibre

    C

     Physical Adapter

    D

     Fibre Target Management Agent


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    Which path selection protocol is used by Fibre Channel fabrics？（）
    A

     IVR

    B

     VoQ

    C

     FSPF

    D

     VSANs

    E

     SANTap


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）
    A

    The FCoE card provides both LAN and fibre channel function from a single card on the blade. 

    B

    The FCoE advanced technology removes the need for any BladeCenter switching to support this function.

    C

    Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.

    D

    The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    In a Cisco Unified Computing System， where are SAN port channels connected to？（）
    A

     Only to Cisco Fibre Channel switches

    B

     Only to Cisco Fibre Channel switches in NPIV mode

    C

     To any Fibre Channel switch

    D

     Directly to storage arrays

    E

     Only to Nexus Switches


    正确答案： E
    解析： 暂无解析

  • 第12题：

    多选题
    What is the use of NPV in Cisco Unified Computing Systems？ （）
    A

    Compatibility with third-party Fibre Channel switches

    B

    Faster throughput

    C

    Reduce domain IDs in a Fibre Channel environment

    D

    Support for increased number of VSANs

    E

    Support for SAN port channels


    正确答案： A,B
    解析： 暂无解析

  • 第13题：

    A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）

    • A、OSPF
    • B、RIP
    • C、FSPF
    • D、VSANs

    正确答案:C

  • 第14题：

    Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true？ （）

    • A、 End-host mode is synonymous with NPV mode.
    • B、 In end-host mode， only hard pinning of vHBAs to Fibre Channel uplink ports is allowed.
    • C、 Making configuration changes between Fibre Channel switching mode and end-host mode is nondisruptive.
    • D、 End-host mode is the default Fibre Channel switching mode.

    正确答案:A,D

  • 第15题：

    Which path selection protocol is used by Fibre Channel fabrics？（）

    • A、 IVR
    • B、 VoQ
    • C、 FSPF
    • D、 VSANs
    • E、 SANTap

    正确答案:C

  • 第16题：

    What types of host connectivity are available on the Storwize V7000?（）

    • A、Fibre Channel and SAS 
    • B、Fibre Channel and iSCSI 
    • C、Fibre Channel, iSCSI and SAS 
    • D、Fibre Channel, iSCSI and InfiniBand 

    正确答案:B

  • 第17题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter
    • D、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    正确答案:C

  • 第18题：

    A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）

    • A、Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules
    • B、Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules
    • C、Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules
    • D、Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules

    正确答案:D

  • 第19题：

    You work as a senior administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain， including domain controllers， have Windows Server 2012 R2 installed.You are running a training exercise for junior administrators. You are currently discussing the Virtual Fibre Channel SAN feature.Which of the following is TRUE with regards to the Virtual Fibre Channel SAN feature？（）

    • A、It prevents virtual machines from connecting directly to Fibre Channel storage
    • B、It allows for virtual machines to connect to Fibre Channel storage directly
    • C、It includes support for virtual SANs， live migration， and multipath I/O
    • D、It includes support for virtual SANs， and live migration， but not multipath I/O

    正确答案:B,C

  • 第20题：

    单选题
    Which path selection protocol is used by Fibre Channel fabrics?（）
    A

    IVR

    B

    VoQ

    C

    FSPF

    D

    VSANs

    E

    SANTap


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）
    A

     OSPF

    B

     RIP

    C

     FSPF

    D

     VSANs


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated.  The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage.  Each system has the following： ？ 2 integrated network ports ？   2 fibre channel adapter cards   ？ 1 power supply and redundant cooling   ？ HACMP v5.1   In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）
    A

    One fibre channel switch

    B

    Two fibre channel switches

    C

    Two Ethernet cards

    D

    Nothing


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host？（）
    A

     The switch receives the FCoE frame and forwards it to another switch over its VE port.

    B

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.

    C

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.

    D

     The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.


    正确答案： C
    解析： 暂无解析

相关内容