You have been asked to configure your router to send link-related SNMP trap notifications to the network management system (NMS) located at address 172.16.17.1.Which two commands are required?（）A、set snmp trap-group my-trap-group targets 172.16.17.1B、set

题目

You have been asked to configure your router to send link-related SNMP trap notifications to the network management system (NMS) located at address 172.16.17.1.Which two commands are required?（）

  • A、set snmp trap-group my-trap-group targets 172.16.17.1
  • B、set snmp targets 172.16.17.1
  • C、set snmp trap-group my-trap-group link-status
  • D、set snmp trap-group my-trap-group categories link
相似考题

1.Your network contains a server that has the SNMP Service installed.You need to configure the SNMP security settings on the server.Which tool should you use?()A.Local Security PolicyB.ScwC.SeceditD.Services console

2.在SNMP协议中,NMS(Network ManagementStation)向代理(Agent)发出的报文有(),GETNEXT和SET。

3.You have been asked to configure your router to send link－related SNMP trap notifications to the network management system (NMS) located at address 172.16.17.1.Which two commands are required?()A. set snmp trap-group my-trap-group targets 172.16.17.1B. set snmp targets 172.16.17.1C. set snmp trap-group my-trap-group link-statusD. set snmp trap-group my-trap-group categories link

4.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

更多“You have been asked to configure your router to send link-related SNMP trap notifications to the network management system (NMS) located at address 172.16.17.1.Which two commands are required?（）A、set snmp trap-group my-trap-group targets 172.16.17.1B、set ”相关问题

  • 第1题：

    You would like to operate IS－IS on interface atm 6／0.33 with an IP address of 192.168.1.1／24.Which set of commands accomplishes this?()

    A. router isis network 192.168.1.0 0.0.0.255

    B. router isis network 192.168.1.0 255.255.255.0

    C. interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 router isis

    D. interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 ip router isis


    参考答案：D

  • 第2题：

    You have been asked to configure your router to send link－related SNMP trap notifications to the network managemetn system (NMS) located at address 172.16.17.1.Which two commands are required?()

    A. set snmp trap-group my-trap-group targets 172.16.17.1

    B. set snmp targets 172.16.17.1

    C. set snmp trap-group my-trap-group link-status

    D. set snmp trap-group my-trap-group categories link


    参考答案：A, D

  • 第3题：

    You install a wireless router and disable the Service Set identifier (SSID) broadcast feature. You need to configure your computer to connect to the wireless network.What should you do?()

    A.A

    B.B

    C.C

    D.D


    参考答案：D

  • 第4题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    A. Router# copy tftp flash

    B. Router# copy flash run

    C. Router(config)# restore flash

    D. Router(config)# repair flash

    E. Router#copy flash tftp

    F. Router# copy start flash


    参考答案：A

  • 第5题：

    SNMP的基本操作不包括（）。

    • A、Get-request
    • B、Get-response
    • C、Set-request
    • D、Set-trap-request

    正确答案:D

  • 第6题：

    Your network contains a server that has the SNMP Service installed.You need to configure the SNMP security settings on the server.Which tool should you use?（）

    • A、Local Security Policy
    • B、Scw
    • C、Secedit
    • D、Services console

    正确答案:D

  • 第7题：

    You are asked to free up disk space so you can update your version of the Junos OS.Which two commands display the files that will be removed?（）

    • A、user@router> request system storage cleanup
    • B、user@router> show system storage
    • C、user@router> request system storage cleanup dry-run
    • D、user@router> show system storage detail

    正确答案:A,C

  • 第8题：

    You would like to operate IS-IS on interface atm 6/0.33 with an IP address of 192.168.1.1/24. Which set of commands accomplishes this?（）

    • A、router isis network 192.168.1.0 0.0.0.255
    • B、router isis network 192.168.1.0 255.255.255.0
    • C、interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 router isis
    • D、interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 ip router isis

    正确答案:D

  • 第9题：

    You have been asked to configure your router to send link-related SNMP trap notifications to the network managemetn system (NMS) located at address 172.16.17.1.Which two commands are required?（）

    • A、set snmp trap-group my-trap-group targets 172.16.17.1
    • B、set snmp targets 172.16.17.1
    • C、set snmp trap-group my-trap-group link-status
    • D、set snmp trap-group my-trap-group categories link

    正确答案:A,D

  • 第10题：

    Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only when you are traveling.  You need to configure the network adapter profile settings to ensure that the computer discovers other network devices only when you are at home.  Which two actions should you perform？（）

    • A、When you configure access to the wired network at home， set the wired network adapter location type to Public.
    • B、When you configure access to the wired network at home， set the wired network adapter location type to Private.
    • C、When you configure access to the public wireless access points， set the wireless network adapter location type to Public.
    • D、When you configure access to the public wireless access points， set the wireless network adapter location type to Private.

    正确答案:B,C

  • 第11题：

    多选题
    You have been asked to configure your router to send link-related SNMP trap notifications to the network management system (NMS) located at address 172.16.17.1.Which two commands are required?（）
    A

    set snmp trap-group my-trap-group targets 172.16.17.1

    B

    set snmp targets 172.16.17.1

    C

    set snmp trap-group my-trap-group link-status

    D

    set snmp trap-group my-trap-group categories link


    正确答案： D,B
    解析： 暂无解析

  • 第12题：

    单选题
    Which command configures the router to send SNMP link-related notifications such as up-down transitions and line status changes?（）
    A

    set snmp trap-group my-trap-group link-status

    B

    set snmp trap-group my-trap-group categories link

    C

    set snmp log link-status

    D

    set snmp trap link-status


    正确答案： C
    解析： 暂无解析

  • 第13题：

    You are asked to free up disk space so you can update your version of the Junos OS.Which two commands display the files that will be removed?()

    A. user@router> request system storage cleanup

    B. user@router> show system storage

    C. user@router> request system storage cleanup dry-run

    D. user@router> show system storage detail


    参考答案：A, C

  • 第14题：

    Which command configures the router to send SNMP link－related notifications such as up－down transitions and line status changes?()

    A.set snmp trap-group my-trap-group link-status

    B.set snmp trap-group my-trap-group categories link

    C.set snmp log link-status

    D.set snmp trap link-status


    参考答案：B

  • 第15题：

    Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eB GP links more evenly? （）

    A. On router A, set the default local - preference to 50.

    B. On router B, set the default metric to 150.

    C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.

    D. On router B, set the default local -preference to 150.


    参考答案：C

  • 第16题：

    SNMP的基本操作不包括()。

    A.Get-request

    B.Get-response

    C.Set-request

    D.Set-trap-request


    参考答案：D

  • 第17题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    • A、Router# copy tftp flash
    • B、Router# copy flash run
    • C、Router(config)# restore flash
    • D、Router(config)# repair flash
    • E、Router#copy flash tftp
    • F、Router# copy start flash

    正确答案:A

  • 第18题：

    You install a wireless router and disable the Service Set Identifier （SSID） broadcast feature. You need to configure your computer to connect to the wireless network.  What should you do？ （）

    • A、Click the Connect to a network link， right-click the appropriate network， and then click the Connect option.
    • B、Click the View computers and devices link， right-click the wireless router， and then click the Enable option.
    • C、Click the Set up a connection or network link， and then click the Set up a wireless Ad hoc network option.
    • D、Click the Set up a connection or network link， and then click the Manually connect to a wireless network option.

    正确答案:D

  • 第19题：

    You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?（）

    • A、user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1
    • B、user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1
    • C、user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1
    • D、user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1

    正确答案:A

  • 第20题：

    Which command configures the router to send SNMP link-related notifications such as up-down transitions and line status changes?（）

    • A、set snmp trap-group my-trap-group link-status
    • B、set snmp trap-group my-trap-group categories link
    • C、set snmp log link-status
    • D、set snmp trap link-status

    正确答案:B

  • 第21题：

    Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only when traveling.  You need to configure the network adapter profile settings to ensure that other systems are allowed to discover your computer only when you are at home.  What are two possible ways to achieve this goal？（）

    • A、When you configure access to the wired network at home， set the wired network adapter location type to Private.
    • B、When you configure access to the wired network at home， set the wired network adapter location type to Public.
    • C、When you configure access to the public wireless access points， set the wireless network adapter location type to Private.
    • D、When you configure access to the public wireless access points， set the wireless network adapter location type to Public.

    正确答案:A,D

  • 第22题：

    多选题
    You have been asked to configure your router to send link-related SNMP trap notifications to the network managemetn system (NMS) located at address 172.16.17.1.Which two commands are required?（）
    A

    set snmp trap-group my-trap-group targets 172.16.17.1

    B

    set snmp targets 172.16.17.1

    C

    set snmp trap-group my-trap-group link-status

    D

    set snmp trap-group my-trap-group categories link


    正确答案： D,B
    解析： 暂无解析

  • 第23题：

    单选题
    You have been asked to configure your MX240 with a default route toward your upstream ISP atIP address 192.168.100.1. Which command successfully completes this task?（）
    A

    user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1

    B

    user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1

    C

    user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1

    D

    user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1


    正确答案： C
    解析： 暂无解析

相关内容