A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）A、CAT3 cableB、Serial cableC、Cro

题目

A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）

  • A、CAT3 cable
  • B、Serial cable
  • C、Crossover cable
  • D、Rollover cable
相似考题

1.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

2.What kind of cable should be used to establish a trunked line between two Catalyst switches?A．A straight-through cableB．An EIA/TIA-232 serial cableC．An auxiliary cableD．A modem cableE．A cross-over cable

3.Which of the following should be used to test an internal NIC without having to connect it to thenetwork?()A. Loopback cableB. Crossover cableC. Rollover cableD. Straight cable

4.Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?A．Rollover cableB．Console cableC．Crossover cableD．Straight-through cableE．Serial cable

更多“A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）A、CAT3 cableB、Serial cableC、Cros”相关问题

  • 第1题：

    An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）

    A. Straight-through cable is used to connect both switches

    B. Loopback plug is connected

    C. Crossover cable is used to connect both switches

    D. Cable is a rollover cable


    参考答案：C

  • 第2题：

    At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）

    A. a serial cable with a V.35 to RJ45 adapter

    B. a CSU/DSU

    C. an external ISDN TA and NT1

    D. The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.


    参考答案：C

  • 第3题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）

    A. You must set each end of the trunk line to IEEE 802.1e encapsulation.

    B. You must set the same VTP management domain name on both switches.

    C. You must set all ports on the two switches as access ports.

    D. You must configure one of the switches as a VTP server.

    E. You must use a rollover cable to connect the two switches.


    参考答案：B, D

  • 第4题：

    Which of the following cables can be used to directly connect a laptop to a PC for ICS?（）

    • A、IEEE 1394 cable
    • B、CAT5 crossover cable
    • C、CAT5e patch cable
    • D、Parallel cable

    正确答案:B

  • 第5题：

    Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?（）

    • A、Rollover cable
    • B、Console cab le
    • C、Crossover cable
    • D、Straight-through cable
    • E、Serial cable

    正确答案:C

  • 第6题：

    Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential differences between the two buildings. Which media type should be used for the connection（）。

    • A、UTP cable
    • B、STP cable
    • C、coaxial cable
    • D、fiber optic cable

    正确答案:D

  • 第7题：

    A technician needs to add network capacity. However, when plugging a second switch into the first switch, there is no link light. Which of the following is the cause of this situation?（）

    • A、The switches are not stackable
    • B、The cable was not wired using 568A
    • C、The cable needs to be a crossover cable
    • D、The switches have IGMP snooping enabled

    正确答案:C

  • 第8题：

    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot.  Which of the following is the FIRST thing the administrator should check？（）

    • A、 Default gateway
    • B、 The ports on the switch
    • C、 Port security on the servers switch port
    • D、 Ethernet cable

    正确答案:A

  • 第9题：

    Which of the following should be used to test an internal NIC without having to connect it to thenetwork?（）

    • A、Loopback cable
    • B、Crossover cable
    • C、Rollover cable
    • D、Straight cable

    正确答案:A

  • 第10题：

    Which of the following is required to connect a partitioned p5-550 to a modem？（）

    • A、A modem adapter
    • B、An async adapter and serial cable
    • C、An Ethernet adapter
    • D、A 9-pin to 25-pin converter and serial cable

    正确答案:B

  • 第11题：

    单选题
    Company.com is adding HACMP to an existing pair of nodes. One node is using EtherChannel  with only one adapter. The other node is using regular Ethernet connection to the switch. The customer is going to increase the number of network interfaces to two for each node.  What other considerations need to be addressed in a HACMP environment？（）
    A

     Al interfaces used for HACMP heartbeats must be identical. Differences in the interfaces will cause heartbeat failure.

    B

     The network interfaces should all be configured with the same frame type. The use of regular Ethernet frames is mandatory.

    C

     Network interfaces for HACMP must be all the same，Ethernet or 802.3. It does not matter which，as long as they are all the same.

    D

     HACMP can use any network interface supported by AIX. The options on the various interfaces are masked by the Ethernet switch and do not affect HACMP.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）
    A

    Straight-through cable is used to connect both switches

    B

    Loopback plug is connected

    C

    Crossover cable is used to connect both switches

    D

    Cable is a rollover cable


    正确答案： D
    解析： 暂无解析

  • 第13题：

    An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC.Which infrastructure is required for the new HMC?（）

    A.An additional switch for the new HMC

    B.Asynchronous adapters on the new HMC

    C.The two 570 servers are directly connected to the new HMC

    D.One 570 is directly connected to the new HMC and the other is directly connected to the existing HMC


    参考答案：A

  • 第14题：

    What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?()

    A. a straight-through cable

    B. an EIA/TIA-232 serial cable

    C. an auxiliary cable

    D. a modem cable

    E. a cross-over cable


    参考答案：E

  • 第15题：

    Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential differences between the two buildings. Which media type should be used for the connection（）。

    A.UTP cable

    B.STP cable

    C.coaxial cable

    D.fiber optic cable


    参考答案：D

  • 第16题：

    An administrator has an existing HMC and POWER6 570 connected to a network switch.  The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC？（）

    • A、An additional switch for the new HMc  
    • B、Asynchronous adapters on the new HMc
    • C、The two 570 servers are directly connected to the new HMc  
    • D、One 570 is directly connected to the new HMC and the other is directly connected to the existing HMc

    正确答案:A

  • 第17题：

    What kind of cable should be used to establish a trunked line between two Catalyst 2950 switches?（）

    • A、a straight-through cable
    • B、an EIA/TIA-232 serial cable
    • C、an auxiliary cable
    • D、a modem cable
    • E、a cross-over cable

    正确答案:E

  • 第18题：

    At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）

    • A、a serial cable with a V.35 to RJ45 adapter
    • B、a CSU/DSU
    • C、an external ISDN TA and NT1
    • D、The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.

    正确答案:C

  • 第19题：

    An administrator needs to connect servers to the Fiber Channel SAN. Which of the following should the administrator install in the servers to allow this connection？（）

    • A、Riser
    • B、HBA
    • C、SCSI card
    • D、SAS card

    正确答案:B

  • 第20题：

    An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）

    • A、Straight-through cable is used to connect both switches
    • B、Loopback plug is connected
    • C、Crossover cable is used to connect both switches
    • D、Cable is a rollover cable

    正确答案:C

  • 第21题：

    When making a serial connection between two Windows 2000 machines， which type of cable is needed for proper communications？（）

    • A、RG-59 coaxial cable
    • B、RS-232 Null Modem cable
    • C、telephone cable
    • D、UTP CAT5 patch cable

    正确答案:B

  • 第22题：

    Company.com is adding HACMP to an existing pair of nodes. One node is using EtherChannel  with only one adapter. The other node is using regular Ethernet connection to the switch. The customer is going to increase the number of network interfaces to two for each node.  What other considerations need to be addressed in a HACMP environment？（）  

    • A、 Al interfaces used for HACMP heartbeats must be identical. Differences in the interfaces will cause heartbeat failure.
    • B、 The network interfaces should all be configured with the same frame type. The use of regular Ethernet frames is mandatory.
    • C、 Network interfaces for HACMP must be all the same，Ethernet or 802.3. It does not matter which，as long as they are all the same.
    • D、 HACMP can use any network interface supported by AIX. The options on the various interfaces are masked by the Ethernet switch and do not affect HACMP.

    正确答案:B

  • 第23题：

    单选题
    A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）
    A

    CAT3 cable

    B

    Serial cable

    C

    Crossover cable

    D

    Rollover cable


    正确答案： B
    解析： 暂无解析

相关内容