A customer would like to create a shared processor partition with 16 virtual processors. What is the minimum number of processing units required in the partition profile?（）A、0.80B、0.16C、1.60D、0.10

题目

A customer would like to create a shared processor partition with 16 virtual processors. What is the minimum number of processing units required in the partition profile?（）

  • A、0.80
  • B、0.16
  • C、1.60
  • D、0.10
相似考题

1. An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）A、Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. B、Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. C、Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. D、Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.

2. A System p customer is planning to implement virtualization and is concerned about how to respond  to an increased workload and what limitations there are for very small workloads.  Which of the following describes the minimum size for an LPAR and the minimum amount that can be transferred from on LPAR to another（）A、Smallest partition 10% of all available processors， as small as 1% of all available processors may be transferred.B、Smallest partition 10% of a processor， as small 1% of a processor may be transferred.C、Smallest partition one processor， as small 1% of a processor may be transferred.D、Smallest partition one core， as small 10% of a processor may be transferred.

3. On a Hardware Management Console （HMC） at version 7， an administrator has an LPAR defined with a minimum of 0.1 processors and a maximum of 4 processors. The administrator wants to go from 1 processing unit to 3 processing units for this partition. In order to make the change，  what value should the administrator enter into the add processor resources window？ （）A、 2B、 3C、 1.0D、 2.9

4.Companycom has purchased a p5 590 with 16 CPUs. To run Simultaneous Multi-Threading (SMT) with a 4-way virtual processor partition with 2.0 processing units of entitlement, how many logical CPUs will be allocated?（）A、8-way logical CPU partition, where each logical CPU has the power of 25% of a logical processor B、4-way logical CPU partition, where each logical CPU has the power of 50% of a physical processor C、8-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor D、16-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor

更多“A customer would like to create a shared processor partition with 16 virtual processors. What is the minimum number of processing units required in the partition profile?（）A、0.80B、0.16C、1.60D、0.10”相关问题

  • 第1题：

    The workload requirement for a Web server running in Micro-Partitioned p5-550 has increased 300 percent over the past six months. The initial partition definitions assigned 0.5 processing units and one virtual processor to the Web server partition. Three months previously， an additional 0.5 CPU was added to the Web server partition. When the technical specialist attempted to allocate a further 0.5 CPU to this partition， no additional performance was achieved. Which of the following actions would most likely resolve the problem？（）

    • A、Add another virtual Ethernet.
    • B、Change the partition to be uncapped.
    • C、Change the number of virtual processors to 2.
    • D、Increase the amount of memory assigned to the partition by 300 percent.

    正确答案:C

  • 第2题：

    A customer is installing an HMC-managed Power 720 with two partitions, one for Production the other for Testing. They plan to use the Testing partition only occasionally and want to minimize hardware. Which of the following meets these requirements?（）

    • A、Create a system profile for each partition. Assign all needed resources as 'required'.
    • B、Define all system resources as 'desired' on the Testing partition. Activate only as needed.
    • C、Create two shared processor pools. Assign the minimal I/O resources required for each partition to the shared pools.
    • D、Create both partitions with minimal 'required' resources, and optional resources as 'desired'. Activate each partition as necessary.

    正确答案:D

  • 第3题：

    The Information Technology （IT） department wants to consolidate two 4-way p5-550 servers onto an 8-way p5-570. However， the departments using the p5-550 servers are concerned about quality of service after consolidation. Which per-partition processor allocation would provide comparable performance while still allowing the POWER5 hypervisor to optimize the processing workload of the server？（）

    • A、4.0 processing units， 4 virtual processors， capped mode
    • B、4.0 processing units， 4 virtual processors， uncapped mode
    • C、4.0 processing units， 8 virtual processors， capped mode
    • D、4.0 processing units， 8 virtual processors， uncapped mode

    正确答案:D

  • 第4题：

    A customer has an HMC-managed Power Systems server with 6 partitions. Four production partitions are subject to varying workloads throughout the day, and two are used for development and testing. The production applications have different licensing limitations on the number of physical cores that may be used. The development partitions can use no more than 1 core. The customer would like to dynamically optimize processor utilization within the licensing limits, with minimal operator intervention. Which of the following meets the customer requirement?（）

    • A、Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partition maximums to one core. Configure each partition to be capped.
    • B、Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partition maximums to one core. Configure each partition to be uncapped.
    • C、Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partitions to use no more than one core. Configure the HMC scheduler to  dynamically assign processors among the pools over a day.
    • D、Create a shared processor pool for each production partition, with the maximum processor limit set to the  licensing limit for the application in the pool. Assign the development and testing partitions to a processor  pool with a maximum of 1 core. Configure each partition to use uncapped processing.

    正确答案:D

  • 第5题：

    One of Company.com’s Linux partitions is experiencing excessive paging. They want to provide more memory to the partition to resolve this problem. What is the best method to add the memory？（）

    • A、Add an additional virtual swap device to the partition.
    • B、Use DLPAR to dynamically add the required memory to the partition.
    • C、Shut down the partition and redefine its profile with additional memory.
    • D、Change Partition Load Manager parameters to provide the partition with additional memory shares.

    正确答案:C

  • 第6题：

    A customer would like to configure an uncapped LPAR so that it can use 2 to 8 cores depending on the workload characteristics.  With SMT4 enabled, what is the least amount of processing resources which can be configured for the LPAR?（）

    • A、8 desired processing units and 8 desired virtual processors
    • B、2 desired processing units and 8 desired virtual processors
    • C、8 desired processing units and 32 desired virtual processors
    • D、2 desired processing units and 32 desired virtual processors

    正确答案:B

  • 第7题：

    单选题
    An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）
    A

    Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 

    B

    Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 

    C

    Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 

    D

    Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）
    A

    The uncapped weight has been set to 0.

    B

    The uncapped weight has been set to 128.

    C

    The processing unit for that partition was set to .1 processing units. A full processor was  assigned.

    D

    The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A customer would like to configure an uncapped LPAR so that it can use 2 to 8 cores depending on the workload characteristics. With SMT4 enabled, what is the least amount of processing resources which can be configured for the LPAR?（）
    A

    8 desired processing units and 8 desired virtual processors

    B

    2 desired processing units and 8 desired virtual processors

    C

    8 desired processing units and 32 desired virtual processors

    D

    2 desired processing units and 32 desired virtual processors


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）
    A

     0

    B

     1

    C

     255

    D

     256


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    On a Hardware Management Console （HMC） at version 7， an administrator has an LPAR defined with a minimum of 0.1 processors and a maximum of 4 processors. The administrator wants to go from 1 processing unit to 3 processing units for this partition. In order to make the change，  what value should the administrator enter into the add processor resources window？ （）
    A

     2

    B

     3

    C

     1.0

    D

     2.9


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A customer is installing an HMC-managed Power 720 with two partitions, one for Production the other for Testing. They plan to use the Testing partition only occasionally and want to minimize hardware. Which of the following meets these requirements?（）
    A

    Create a system profile for each partition. Assign all needed resources as 'required'.

    B

    Define all system resources as 'desired' on the Testing partition. Activate only as needed.

    C

    Create two shared processor pools. Assign the minimal I/O resources required for each partition to the shared pools.

    D

    Create both partitions with minimal 'required' resources, and optional resources as 'desired'. Activate each partition as necessary.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）

    • A、 0
    • B、 1
    • C、 255
    • D、 256

    正确答案:C

  • 第14题：

    Company.com has purchased a 2-way p5-520 and would like to create three Micro-Partitions on the server. Which feature of Advanced POWER Virtualization would allow them to create the desired number of partitions？（）

    • A、Virtual Ethernet
    • B、Shared Ethernet Adapter
    • C、Dedicated Processors
    • D、Shared Processor Pool

    正确答案:D

  • 第15题：

    A customer wants to run DB2 on a Power 780 with uncapped partitions. They have licensed DB2 for 32 of the 64 active cores， and will use it in multiple partitions.   How can the customer ensure that the number of licenses purchased for DB2 is not exceeded？（）

    • A、Create a 32-core shared processor pool for the DB2 partitions.
    • B、Limit the number of virtual processors on each DB2 partition to 32.
    • C、Use the IBM License Metric Tool to dynamically manage DB2 usage in the partitions.
    • D、Set the ‘Desired Processing Units’ in each DB2 partition profile so that the sum of all partitions equals 32.

    正确答案:A

  • 第16题：

    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）

    • A、In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
    • B、In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
    • C、In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
    • D、In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

    正确答案:C

  • 第17题：

    The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）

    • A、The uncapped weight has been set to 0.
    • B、The uncapped weight has been set to 128.
    • C、The processing unit for that partition was set to .1 processing units. A full processor was  assigned.
    • D、The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.

    正确答案:A

  • 第18题：

    单选题
    The Information Technology （IT） department wants to consolidate two 4-way p5-550 servers onto an 8-way p5-570. However， the departments using the p5-550 servers are concerned about quality of service after consolidation. Which per-partition processor allocation would provide comparable performance while still allowing the POWER5 hypervisor to optimize the processing workload of the server？（）
    A

    4.0 processing units， 4 virtual processors， capped mode

    B

    4.0 processing units， 4 virtual processors， uncapped mode

    C

    4.0 processing units， 8 virtual processors， capped mode

    D

    4.0 processing units， 8 virtual processors， uncapped mode


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    Companycom has purchased a p5 590 with 16 CPUs. To run Simultaneous Multi-Threading (SMT) with a 4-way virtual processor partition with 2.0 processing units of entitlement, how many logical CPUs will be allocated?（）
    A

    8-way logical CPU partition, where each logical CPU has the power of 25% of a logical processor 

    B

    4-way logical CPU partition, where each logical CPU has the power of 50% of a physical processor 

    C

    8-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor 

    D

    16-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A customer has an HMC-managed Power Systems server with 6 partitions. Four production partitions are subject to varying workloads throughout the day, and two are used for development and testing. The production applications have different licensing limitations on the number of physical cores that may be used. The development partitions can use no more than 1 core. The customer would like to dynamically optimize processor utilization within the licensing limits, with minimal operator intervention. Which of the following meets the customer requirement?（）
    A

    Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partition maximums to one core. Configure each partition to be capped.

    B

    Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partition maximums to one core. Configure each partition to be uncapped.

    C

    Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partitions to use no more than one core. Configure the HMC scheduler to  dynamically assign processors among the pools over a day.

    D

    Create a shared processor pool for each production partition, with the maximum processor limit set to the  licensing limit for the application in the pool. Assign the development and testing partitions to a processor  pool with a maximum of 1 core. Configure each partition to use uncapped processing.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A customer wants to run DB2 on a Power 780 with uncapped partitions. They have licensed DB2 for 32 of the 64 active cores， and will use it in multiple partitions.   How can the customer ensure that the number of licenses purchased for DB2 is not exceeded？（）
    A

    Create a 32-core shared processor pool for the DB2 partitions.

    B

    Limit the number of virtual processors on each DB2 partition to 32.

    C

    Use the IBM License Metric Tool to dynamically manage DB2 usage in the partitions.

    D

    Set the ‘Desired Processing Units’ in each DB2 partition profile so that the sum of all partitions equals 32.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A customer would like to create a shared processor partition with 16 virtual processors. What is the minimum number of processing units required in the partition profile?（）
    A

    0.80

    B

    0.16

    C

    1.60

    D

    0.10


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）
    A

    In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.

    B

    In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.

    C

    In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.

    D

    In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.


    正确答案： D
    解析： 暂无解析

相关内容