A system administrator installed a new switch using a script to configure it. IP connectivity was tested using pings to SwitchB.Later attempts to access NewSwitch using Telnet from SwitchA faileD.Which statement is true?（）A、Executing password recovery is

题目

A system administrator installed a new switch using a script to configure it. IP connectivity was tested using pings to SwitchB.Later attempts to access NewSwitch using Telnet from SwitchA faileD.Which statement is true?（）

  • A、Executing password recovery is required.
  • B、The virtual terminal lines are misconfigured.
  • C、Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
  • D、Power cycle of NewSwitch will return it to a default configuration.
相似考题

1.After a server has been installed into a rack, an administrator must ensure which of the following?()A. Warm air flow is permitted through the front bezelB. The system is labeled so that it can be identifiedC. Verify the change control process can be implementedD. Determine the correct power requirements

2.An administrator installed new components on a server. After the device installation， two of the components fail.Which of the following is the cause of the problem？（）A、The server was not powered off correctly.B、The proper ESD procedures were not used.C、The devices were installed in the incorrect sequence.D、The devices are incompatible with the system.

3.After a server has been installed into a rack, an administrator must ensure which of the following?（）A、Warm air flow is permitted through the front bezelB、The system is labeled so that it can be identifiedC、Verify the change control process can be implementedD、Determine the correct power requirements

4.Prior to installing a new system, an administrator needs to provide the SAN administrators with the WWN of the fibre channel cards to allow them to allocate and zone bootable storage. Due to the lack of installed operating system, the administrator will use a bootable diagnostic CD.Which option within the diag utility will display the required information?（）A.Task Selection > Display Hardware Vital Product DataB.Advanced Diagnostic Routines > Display Resource AttributesC.Diagnostic Routines > Display Configuration and Resource ListD.Task Selection > Display Multipath I/O (MPIO) Device Configuration

参考答案和解析
正确答案:B
更多“A system administrator installed”相关问题

  • 第1题：

    The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）

    • A、System reboot
    • B、Reseat the memory
    • C、Install the latest firmware
    • D、Install the latest driver

    正确答案:B

  • 第2题：

    What is the difference between the CUoD and Utility Capacity On Demand?（）

    • A、Utility allows for activation of resources by the hour. CUoD allows for permanent access to additional resources installed into the system.
    • B、Utility allows for permanent access to additional resources installed into the system. CuOD allows for activation of resources by the hour.
    • C、Utility allows for activation of resources by the minute. CUoD allows for permanent access to additional resources installed into the system.
    • D、Utility allows for a 30 day usage of additional resources installed into the system. CUoD allows for permanent access to additional resources installed into the system.

    正确答案:C

  • 第3题：

    A system administrator is doing an AIX 5L New and Complete Overwrite installation on a system with a 64-bit processor using the default settings. Which of the following will be the resulting installed environment？（）

    • A、Only the 32-bit kernel will be installed and enabled
    • B、Only the 64-bit kernel will be installed and enabled
    • C、Both the 32-bit and 64-bit kernel will be installed and the 32-bit kernel will be enabled
    • D、Both the 32-bit and 64-bit kernel will be installed and the 64-bit kernel will be enabled

    正确答案:C

  • 第4题：

    A System p administrator has been instructed to verify that all filesets have all required requisitesand are completely installed. Which of the following commands will provide this information（）

    • A、lslpp
    • B、lppchk
    • C、geninstall
    • D、installp

    正确答案:B

  • 第5题：

    How can the system administrator determine if a system is running in 32-bit or 64-bit mode？（）

    • A、Use ’prtconf -c’ to see if the system is 64-bit enabled
    • B、Check the /etc/inittab to see if /etc/method/cfg64 is enabled
    • C、Use the ls -al to see if /unix is linked to /usr/lib/boot/unix_64
    • D、Use the lslpp command to see if the bos.mp64 fileset is installed

    正确答案:C

  • 第6题：

    Prior to installing a new system, an administrator needs to provide the SAN administrators with the WWN of the fibre channel cards to allow them to allocate and zone bootable storage. Due to the lack of installed operating system, the administrator will use a bootable diagnostic CD. Which option within the diag utility will display the required information?（）

    • A、Task Selection > Display Hardware Vital Product Data
    • B、Advanced Diagnostic Routines > Display Resource Attributes
    • C、Diagnostic Routines > Display Configuration and Resource List
    • D、Task Selection > Display Multipath I/O (MPIO) Device Configuration

    正确答案:A

  • 第7题：

    对于IIS日志文件的访问权限，下列哪些设置是正确的？（）

    • A、SYSTEM（完全控制）Administrator（完全控制）Users（修改）
    • B、SYSTEM（完全控制）Administrator（完全控制）Everyone（读取和运行）
    • C、SYSTEM（完全控制）Administrator（完全控制）Inernet来宾账户（读取和运行）
    • D、SYSTEM（完全控制）Administrator（完全控制）

    正确答案:D

  • 第8题：

    单选题
    What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）
    A

    The new system requires 1 installed processor card for the GX++ bus adapter

    B

    The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter

    C

    The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter

    D

    The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand  cluster adapter


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）
    A

    Move the RAID adapter to another slot.

    B

    Perform a baseline of the system.

    C

    Contact the reseller of the adapter for a replacement card.

    D

    Check the RAID adapter’s manufacturer for the latest drivers.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator has just installed a web server for the company's Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this?（）
    A

    The server's firewall is misconfigured.

    B

    The server's timeout feature is set incorrectly.

    C

    The web server was not installed properly.

    D

    The company firewall is misconfigured.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    An administrator has just installed a web server for the companys Internet site. After bringing the system online， customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues.  Which of the following is the MOST likely reason for this？（）

    • A、 The servers firewall is misconfigured.
    • B、 The server’s timeout feature is set incorrectly.
    • C、 The web server was not installed properly.
    • D、 The company firewall is misconfigured.

    正确答案:D

  • 第12题：

    An administrator is installing a C compiler on a system. According to the compiler’s documentation， the AIX fileset bos.adt.libm must be installed prior to the installation of the compiler.  Which of the following commands would verify installation of the prerequisite fileset（）

    • A、installp
    • B、instfix
    • C、Ippchk
    • D、Islpp

    正确答案:D

  • 第13题：

    A system administrator has just installed a new maintenance level， but "oslevel -r" does not show the correct maintenance level. What command can be used to determine which filesets are downlevel？（）

    • A、lppchk
    • B、instfix
    • C、fixdist
    • D、maintlvl

    正确答案:B

  • 第14题：

    A System p administrator has just installed a new technology level， but "oslevel -r" does not show the expected technology level.  Which of the following commands would determine which filesets are downlevel（）

    • A、lppchk
    • B、instfix
    • C、oslevel
    • D、installp

    正确答案:B

  • 第15题：

    What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）

    • A、The new system requires 1 installed processor card for the GX++ bus adapter
    • B、The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter
    • C、The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter
    • D、The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand  cluster adapter

    正确答案:B

  • 第16题：

    A system administrator is installing a C compiler on a system. According to the compiler’s documenation， the AIX fileset bos.adt.lib must be installed prior to installation of the compiler. Which command would the system administrator use to verify installation of the bos.adt.lib fileset？（）

    • A、installp
    • B、instfix
    • C、lsallq
    • D、lslpp

    正确答案:D

  • 第17题：

    单选题
    An administrator installed new components on a server. After the device installation， two of the components fail.Which of the following is the cause of the problem？（）
    A

    The server was not powered off correctly.

    B

    The proper ESD procedures were not used.

    C

    The devices were installed in the incorrect sequence.

    D

    The devices are incompatible with the system.


    正确答案： C
    解析： 暂无解析

  • 第18题：

    单选题
    A system administrator just completed an AIX installation but suspects that not all filesets installed completely. Which command should be run to verify that all filesets are completely installed？（）
    A

    installp

    B

    lslpp

    C

    lppchk

    D

    oslevel


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is >4 bos.rte V>5 bos.rte not installed. 5.1.0 lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem?（）
    A

    bos.rte is corrupted and needs to be reinstalled.

    B

    The system administration needs to reboot the system.

    C

    The /root part of bos.rte was installed but not the user part. Reinstall the missing software.

    D

    The update CD needs to be applied with the smitty update_all command.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A system administrator has been instructed to verify that all filesets have all required requisites and are completely installed. Which command will provide this information？（）
    A

    lslpp

    B

    lppchk

    C

    instfix

    D

    installp


    正确答案： D
    解析： 暂无解析

相关内容