An administrator installed new components on a server. After the device installation， two of the components fail.Which of the following is the cause of the problem？（）A、The server was not powered off correctly.B、The proper ESD procedures were not used.C、Th

第1题：

A system administrator suspects that there were problems with the AIX installation on a pSeries server. Which of the following commands can be used， with the appropriate flags， to view the BOS installation output files？（）

• A、alog
• B、errpt
• C、lscfg
• D、installp

第2题：

An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）

• A、The hard drives were not plugged into the server correctly.
• B、The controller driver is outdated and needs to be updated from the OEMs website.
• C、The firmware for the server is too old and does not support the new RAID controller card.
• D、The cable from the controller to the hard drive backplane is not connected.

第3题：

After a technician came out and installed a new wireless router, one of the wired workstations began having problems connecting to the file server. This is only an intermittent problem. Which of the following actions will the technician MOST likely perform to resolve this problem?（）

• A、Change the router's SSID 
• B、Move the router's location
• C、Check user permissions
• D、Check the cable ends

第4题：

An administrator creates a new directory then shares it on the Windows server. The administrator sets the permissions for everyone to "Modify" but users report they are unable to create or delete documents. Which of the following is the cause？（）

• A、The administrator forgot to change the share permissions
• B、The users were not part of the “Everyone” built in group
• C、The administrator shared the files but not the folder
• D、“Modify” only allows users to change existing documents

第5题：

Due to slow backup response， an administrator installed a new driver for the SCSI card. After a server reboot the device is not working properly.  Which of the following is the BEST course of action？（）

• A、Reboot the server and restore files using ASR.
• B、In Device Manager， locate the device， and click Roll Back Driver at the driver tab.
• C、Restore the driver from the previous backup tape.
• D、Go to Device Manager， locate the device， and click Restore Previous Driver at the driver tab.

第6题：

The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）

• A、System reboot
• B、Reseat the memory
• C、Install the latest firmware
• D、Install the latest driver

第7题：

An administrator has shut down a server to install additional memory. When the administrator restarts the server after the upgrade, it times out. Which of the following could be the cause of the problem?（）

• A、Processor failure
• B、Third party memory
• C、Disk drive failure
• D、ESD during the upgrade
• E、Backplane failure

第8题：

You are an enterprise administrator for Cer-tech .com. All the servers on the network run Windows Server2008. The network consists of a Server that has the Windows Server virtualization role service installed.You create a new virtual machine， installed Windows Server 2008 on it， and configure it to use the physicalnetwork card of the host server. After this installation and configuration the virtual machine， you wereunable to access network resources from the virtual machine. Which of the following options would youchoose to ensure that the virtual host can connect to the physical network？（）

• A、Install the MS Loopback adapter on the virtual machine.
• B、Enable the Multipath I/O feature on the host server.
• C、Install Windows Server virtualization Guest Integration Components on the virtual machine.
• D、Install the MS Loopback adapter on the host server.
• E、None of the above

第9题：

第10题：

第11题：

第12题：

第13题：

An administrator wants to rackmount a new server.  Power and network outlets are available and cooling in the room is adequate to support the additional server. The new server is identical to the other servers already installed.  Which of the following items should the administrator FIRST verify before installing the server？（）

• A、HBA is compatible with the SAN fiber switch.
• B、Update the newly installed server with the latest KVM drivers.
• C、The UPS will continue to perform as expected with the additional load.
• D、Verify the server NIC is compatible with the NAS.

第14题：

An administrator installs new IDE drives into the company server. Upon starting the machine， the BIOS does not recognize any of the drives. Which of the following is the MOST likely cause of the problem？（）

• A、The jumpers are not set correctly on the drives.
• B、The power supply is not rated high enough to support the additional drives.
• C、The BIOS is not compatible with the drives.
• D、The drives are not powered on.

第15题：

An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS， but it does not receive an IP address. Which of the following is the MOST likely cause of this？（）

• A、The NIC is not on the HCL.
• B、The driver is incorrect on the server.
• C、The patch cable has not been seated properly.
• D、The NIC is not seated properly.

第16题：

An administrator notes that after a recent power outage， some open files were corrupted on oneaffected file server. Which of the following items should the administrator consider to determine the cause of this corruption？（）

• A、 The servers memory
• B、 The servers RAID controller battery
• C、 The servers processor
• D、 The servers NIC teaming configuration

第17题：

A technician is installing new memory in a server. The technician would consult the HCL to ensure which of the following？（）

• A、Memory and virtual memory compatibility
• B、Memory and speed compatibility
• C、Memory and HDD compatibility
• D、ESD standards were followed

第18题：

A technician wants to increase the reliability of a DHCP server. Which of the following components should be installed to increase the server’s uptime on the network？（）

• A、 Increase the amount of RAM
• B、 Use a lower voltage power supply
• C、 Add a hardware firewall
• D、 Install redundant NICs

第19题：

A technical consultant needs to deploy a Microsoft Windows 2003 server image from a single x336 to five new x336 servers using Remote Deployment Manager （RDM）.  After installing and configuring RDM and loading the installation image， the consultant wants to deploy the first server.  After the new x336 is booted， it is unable to connect to the RDM server.  Which of the following is the most likely cause of the problem？（）

• A、The new server is not PXE-enabled.
• B、The RDM agent is not configured on the RDM server.
• C、The IBM Director agent is not installed on the new server.
• D、A DHCP server is not installed or configured the network.

第20题：

第21题：

第22题：

第23题：