When setting an access point to a non-root role，what two parameters，other than role in the radio network， must be configured on the ssid manager page？（）A、infrastructure devices to associate only to this ssidB、enable ip redirection on this ssidC、set data b

题目

When setting an access point to a non-root role，what two parameters，other than role in the radio network， must be configured on the ssid manager page？（）

  • A、infrastructure devices to associate only to this ssid
  • B、enable ip redirection on this ssid
  • C、set data beacon rate
  • D、multiple basic service set identification （bssid）
  • E、set infrastructure ssid
相似考题

1.You are developing a Windows Communication Foundation (WCF) service.You need to enable security auditing for all events.What should you do?()A. Set the serviceAuthorizationAuditLevel setting to Success and the messageAuthenticationAuditLevel setting to Success.B. Set the messageAuthenticationAuditLevel setting to Success and the auditLogLocation setting to Application.C. Set the serviceAuthorizationAuditLevel setting to SuccessAndFailure and the messageAuthenticationAuditLevel setting to SuccessAndFailure.D. Set the messageAuthenticationAuditLevel setting to SuccessAndFailure and the auditLogLocation setting to Security.

2.What is true about a Pre-Block ACLconfigured when setting up your sensor toperform IP Blocking？（）A、 The Pre-Block ACL is overwritten when a blockingaction is initiatied by the sensorB、 The blocking ACL entries generated by the sensor override the Pre-Block ACL entriesC、 The Pre-Block ACL entries override the blocking ACL entries generated by the sensorD、 The Pre-Block ACL is replaced by the Post-Block ACL when a blocking actionis initiated bythe sensorE、 You can not configure a Pre-Block ACL when configuring IP Blockingon your sensor

3.Which statements is true about Predictive Failure Analysis （PFA） for System x servers？（）A、PFA is embedded in selected server components and requires no action for being enabledB、PFA is available only when the Server Plus Pack is installed on the serverC、PFA is available only when a Virtual Media Key is presentD、PFA is available when the related setting is turned on in UEFI settings

4.In your Database, the TBS PERCENT USED parameter is set to 60 and the TBS PERCENT FREE parameter is set to 20.Which two storage-tiering actions might be automated when using information Lifecycle Management (ILM) to automate data movement?（）A. The movement of all segments to a target tablespace with a higher degree of compression, on a different storage tier, when the source tablespace exceeds TBS PERCENT USEDB. Setting the target tablespace to read-onlyC. The movement of some segments to a target tablespace with a higher degree of compression, on a different storage tier, when the source tablespace exceeds TBS PERCENT USEDD. Setting the target tablespace offlineE. The movement of some blocks to a target tablespace with a lower degree of compression, on a different storage tier, when the source tablespace exceeds TBS PERCENT USED

更多“When setting an̳”相关问题

  • 第1题：

    While setting up the threshold for tablespace space usage metrics for one of your tablespaces， you define the critical threshold as 60% and warning threshold as 75%. What would be the result of this setting？（）

    • A、 It would result in an error because the warning threshold cannot be more than the critical threshold.
    • B、 The warning threshold is ignored and alerts would be generated when space usage exceeds the critical threshold.
    • C、 The critical threshold is ignored and alerts would be generated when space usage exceeds the warning threshold.
    • D、 Both threshold values are used and alerts are generated when space usage exceeds the respective threshold values.

    正确答案:A

  • 第2题：

    When setting up a new small office home office (SOHO) wireless network, which of the following is MOST likely to be the default wireless channel?（）

    • A、2
    • B、5
    • C、6
    • D、9

    正确答案:C

  • 第3题：

    olga wants to have one action on the video form that will give the options to print ,save and exit the document when it is clicked .how can she accomplish this?（）

    • A、use an action with subactions 
    • B、layer the actions in the action menu  
    • C、Use action buttons within an outline control in a hidden frame to present "twisties " 
    • D、use hide/when formulas along with a database profile field setting to display "toolbars" of icons

    正确答案:A

  • 第4题：

    When setting up schedules and enforcing scheduling of different types of workloads， which of the following are critical performance issues？（）

    • A、 Disk fragmentation
    • B、 Performance results analysis
    • C、 Capacity forecasting and planning
    • D、 Resource contention and availability

    正确答案:D

  • 第5题：

    Which statement is true regarding the retention policy for the incidents accumulated in the AutomaticDiagnostic Repository (ADR)?（）

    • A、The incident metadata is purged when the problem is resolved and the DBA closes the SR
    • B、The incident files and dumps are not retained in the ADR for the manually created incidents
    • C、The incident files are retained but the incident metadata is purged when the problem is resolved and the DBA closes the SR
    • D、The default setting is for one year after which the incident metadata is purged from the ADR and the files are retained for one month

    正确答案:D

  • 第6题：

    You are developing a Windows Communication Foundation (WCF) service. You need to enable security auditing for all events. What should you do?（）

    • A、Set the serviceAuthorizationAuditLevel setting to Success and the messageAuthenticationAuditLevel setting to Success.
    • B、Set the messageAuthenticationAuditLevel setting to Success and the auditLogLocation setting to Application.
    • C、Set the serviceAuthorizationAuditLevel setting to SuccessAndFailure and the messageAuthenticationAuditLevel setting to SuccessAndFailure.
    • D、Set the messageAuthenticationAuditLevel setting to SuccessAndFailure and the auditLogLocation setting to Security.

    正确答案:C

  • 第7题：

    When configuring dual VIO servers to connect to SAN based disk in failover mode， what setting must be applied？ （）

    • A、 algorithm = failover
    • B、 algorithm = round_robin
    • C、 reserve_policy = no_reserve
    • D、 reserve_policy = single_path

    正确答案:C

  • 第8题：

    Which statement is true about "sticky" load balancing for Clusters? （）

    • A、The "clientip" setting does not apply to clusters, it only pertains to a Forwarder.
    • B、When set to "clientip" it uses the client's IP address to bind the client to a particular target server.
    • C、When set to "clientip" it allows a DX sticky cookie to be sent to and stored by the client based on the IP address.
    • D、When set to "clientip" it ensures that all subsequent requests are directed to the same client that made the initial request.

    正确答案:B

  • 第9题：

    单选题
    Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile？（）
    A

     boot policy and BIOS policy

    B

     disk scrub and boot policy

    C

     BIOS setting scrub， boot policy， and BIOS policy

    D

     disk scrub and BIOS setting scrub


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    Given the following script， why does the output come out as an empty line instead of "dog"？（）
    A

    The $VAR variable was not exported

    B

    The $VAR should have been set as VAR

    C

    dog needs double quotes around it when setting $VAR

    D

    The { } should not be around VAR in the echo command


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    What is true about a Pre-Block ACLconfigured when setting up your sensor toperform IP Blocking？（）
    A

     The Pre-Block ACL is overwritten when a blockingaction is initiatied by the sensor

    B

     The blocking ACL entries generated by the sensor override the Pre-Block ACL entries

    C

     The Pre-Block ACL entries override the blocking ACL entries generated by the sensor

    D

     The Pre-Block ACL is replaced by the Post-Block ACL when a blocking actionis initiated bythe sensor

    E

     You can not configure a Pre-Block ACL when configuring IP Blockingon your sensor


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    When configuring dual VIO servers to connect to SAN based disk in failover mode， what setting must be applied？ （）
    A

     algorithm = failover

    B

     algorithm = round_robin

    C

     reserve_policy = no_reserve

    D

     reserve_policy = single_path


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile？（）

    • A、 boot policy and BIOS policy
    • B、 disk scrub and boot policy
    • C、 BIOS setting scrub， boot policy， and BIOS policy
    • D、 disk scrub and BIOS setting scrub

    正确答案:D

  • 第14题：

    When setting up a wireless network to cover a large area, which of the following needs to beconsidered FIRST?（）

    • A、Device placement
    • B、Encryption methods
    • C、Wireless channels
    • D、SSID name

    正确答案:A

  • 第15题：

    norma has a form action that will allow users to create comments to the existing doc. When Norma views the form in her web browser, she sees the action. but when she opens the form in her notes client she cannot see the action . which one of the following should she do to correct the problom? （）

    • A、delete old action and create a new one on the form
    • B、Make sure the comments form is available for notes clients use
    • C、Make the action a shared action and disable the hide-when setting for “web borwsers”
    • D、Check the actions hide-when setting to make sure the action is available for “notes 4.6 later”

    正确答案:D

  • 第16题：

    What are three methods to reduce Mysql server exposure to remote connections?（）

    • A、Setting — skip-networking when remote connections are not required
    • B、Using the sql_mode=STRICT_SECURE after connections are established for encrypted communications
    • C、Setting specific GRANT privilege to limit remote authentication
    • D、Setting – mysql_secure_configuration to enable paranoid mode
    • E、Using SSL when transporting data over remote networks

    正确答案:A,C,E

  • 第17题：

    When setting up the Flashback Data Archive， which of these key parameters are required？（）

    • A、 Tablespace name
    • B、 Storage quota
    • C、 Retention
    • D、 Table name
    • E、 Create a default archive

    正确答案:A,C

  • 第18题：

    You need to configure the local security policy setting to request a user name and password when you make changes to the computer system.  What should you do？（）

    • A、Enable the Password must meet complexity requirements setting.
    • B、Enable the User Account Control： Detect application installations and prompt for elevation setting.
    • C、Configure the Interactive logon： Prompt user to change password before expiration setting to a value between 1 and 999.
    • D、Configure the User Account Control： Behavior of the elevation prompt for administrators in Admin Approval mode setting to the Prompt for credentials option.

    正确答案:D

  • 第19题：

    You are the network administrator for Fabrikam， Inc. The network contains a DNS server named Server1.  Server1 is configured to resolve queries for external internet resources. Server1 also hosts the fabrikam.com internal zone for Active Directory. Users report that they are directed to the wrong Web site when browsing for well-known Internet Web sites.  You need to minimize the occurrence of unexpected results when users browse the Internet in the future. You also need to minimize disruption to users. What should you do？（）

    • A、Enable the Disable recursion setting in the advanced properties of Server1.
    • B、Enable Fail on load if bad zone data setting in the advanced properties of Server1.
    • C、Enable the Secure cache against pollution setting in the advanced properties of Server1.
    • D、Enable the Enable automatic scavenging of stale resource records setting in the advanced properties of Server1 and set it to 7 days.

    正确答案:C

  • 第20题：

    单选题
    When setting up a new small office home office (SOHO) wireless network, which of the following is MOST likely to be the default wireless channel?（）
    A

    2

    B

    5

    C

    6

    D

    9


    正确答案： C
    解析： 暂无解析

  • 第21题：

    多选题
    When setting up the Flashback Data Archive， which of these key parameters are required？（）
    A

    Tablespace name

    B

    Storage quota

    C

    Retention

    D

    Table name

    E

    Create a default archive


    正确答案： E,A
    解析： 暂无解析

  • 第22题：

    单选题
    While setting up the thresholds for tablespace space usage metrics for one of your tablespaces， you define the critical threshold as 60% and warning threshold as 75%. What would be the result of this setting？（）
    A

    It would result in an error because the warning threshold cannot be more than the critical threshold.

    B

    The warning threshold is ignored and alerts would be generated when space usage exceeds the critical threshold.

    C

    The critical threshold is ignored and alerts would be generated when space usage exceeds the warning threshold.

    D

    Both threshold values are used and alerts are generated when space usage exceeds the respective threshold values.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement is true regarding the retention policy for the incidents accumulated in the AutomaticDiagnostic Repository (ADR)?（）
    A

    The incident metadata is purged when the problem is resolved and the DBA closes the SR

    B

    The incident files and dumps are not retained in the ADR for the manually created incidents

    C

    The incident files are retained but the incident metadata is purged when the problem is resolved and the DBA closes the SR

    D

    The default setting is for one year after which the incident metadata is purged from the ADR and the files are retained for one month


    正确答案： A
    解析： 暂无解析

  • 第24题：

    多选题
    You work as a Web Developer at Certkiller.com. You are in the process of creating a Webapplication using Microsoft ASP.NET 3.5.  In order toimplement partial rendering on a page you add the following markup：                              You only want the content in the updatePanel2 control to be updated when the Button controlnamed _btnUpd is clicked. You need to configure the page to accomplish this goal of thecompany.  What should you do？（）
    A

    You should consider replacing AsyncPostBackTrigger with PostBackTrigger.

    B

    You should consider setting the UpdateMode property of updatePanel2 to Conditional.

    C

    You should consider setting the ChildrenAsTriggers property of updatePanel1 to false.

    D

    You should consider setting the ChildrenAsTriggers property of updatePanel2 to false.

    E

    You should consider setting the UpdateMode property of updatePanel1 to Conditional.

    F

    You should consider setting the UpdateMode property of updatePanel2 to Always.


    正确答案： B,D
    解析： 暂无解析

相关内容