A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）A、The VLAN must be createdB、The VLAN must be namedC、An IP address and subnet mask must be conf

题目

A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）

  • A、The VLAN must be created
  • B、The VLAN must be named
  • C、An IP address and subnet mask must be configured for the new VLAN
  • D、The desired ports must be added to the new VLAN
  • E、The VLAN must be added to the existing VTP Domain
相似考题

1.Which of the following steps are necessary in order to add a new VLAN to the Ezonexam switched network? (Select all that apply)A．Create the VLAN.B．Name the VLAN.C．Configure an IP address for the VLAN.D．Add the desired ports to the new VLAN.E．Add the VLAN to the VTP domain.

2.A Ezonexam switch is configured with all ports assigned to VLAN 2. In addition, all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?A．The additions will create more collisions domains.B．IP address utilization will be more efficient.C．More bandwidth will be required than was needed previously.D．An additional broadcast domain will be created.E．The possibility that switching loops will occur will increase dramatically.

3.Given that the current directory is empty, and that the user has read and write privileges to the current, and the following:Which statement is true?()A.Compilation fails.B.Nothing is added to the file system.C.Only a new file is created on the file system.D.Only a new directory is created on the file system.E.Both a new file and a new directory are created on the file system.

4.A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above

更多“A new VLAN needs to be created f”相关问题

  • 第1题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named EZONEXAM. Which of the following need to be completed for the creation of this new VLAN? (Select all that apply)

    A. The EZONEXAM VLAN must be created.

    B. The desired ports must be added to the new EZONEXAM VLAN.

    C. The EZONEXAM VLAN must be added to all of the domains.

    D. The EZONEXAM VLAN must be named.

    E. An IP address must be configured for the EZONEXAM VLAN.

    F. None of the above. VLAN creations are automatic.


    正确答案：ABD
    A,B,D 解析：Explanation:
    Creating a VLAN is done in 3 steps:
    1. Create the VLAN
    2. Name the VLAN
    3. Assign ports to the VLAN

    From there, other features and functionality can be configured, but these are the only steps that are required for the addition of a VLAN.

    Incorrect Answers:
    C. The VLAN needs only to be added to a single switch, where it can act as a stand-alone VLAN, or it can be transferred to other switches in the network through the use of the VTP protocol.

    E. VLANs operate at layer 2, and although many are configured with a layer 3 IP address, it is not absolutely necessary to do this.

  • 第2题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()

    A. All defined VLANs are allowed on the trunk by default.

    B. Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C. Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D. Each VLAN, or VLAN range, that is specified with the vlan database command.


    参考答案：C

  • 第3题：

    An SVI has been configured on a device. Which two statements are true about a switched virtualinterface （SVI）？（）

    • A、An SVI is normally created for the default VLAN （VLAN1） to permit remote switchadministration
    • B、Multiple SVIs can be associated with a VLAN
    • C、SVI is another name for a routed port
    • D、An SVI is created by entering the no switchport command in interface configuration mode
    • E、An SVI provides a default gateway for a VLAN

    正确答案:A,E

  • 第4题：

    A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?（）

    • A、More collision domains will be created.
    • B、IP address utilization will be more efficient.
    • C、More bandwidth will be required than was needed previously.
    • D、An additional broadcast domain will be created.

    正确答案:D

  • 第5题：

    An SVI has been configured on a device.  Which two statements are true about a switched virtual interface （SVI）？（）

    • A、An SVI is normally created for the default VLAN （VLAN1） to permit remote switch administration.
    • B、Multiple SVIs can be associated with a VLAN.
    • C、SVI is another name for a routed port.
    • D、An SVI is created by entering the no switchport command in interface configuration mode. 
    • E、An SVI provides a default gateway for a VLAN.

    正确答案:A,E

  • 第6题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?（）

    • A、The TESTKING VLAN must be created.
    • B、The desired ports must be added to the new TESTKING VLAN.
    • C、The TESTKING VLAN must be added to all of the domains.
    • D、The TESTKING VLAN must be named.
    • E、An IP address must be configured for the TESTKING VLAN.
    • F、None of the above. VLAN creations are automatic.

    正确答案:A,B,D

  • 第7题：

    多选题
    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?（）
    A

    The TESTKING VLAN must be created.

    B

    The desired ports must be added to the new TESTKING VLAN.

    C

    The TESTKING VLAN must be added to all of the domains.

    D

    The TESTKING VLAN must be named.

    E

    An IP address must be configured for the TESTKING VLAN.

    F

    None of the above. VLAN creations are automatic.


    正确答案： C,F
    解析： 暂无解析

  • 第8题：

    单选题
    When devices are in cluster mode， which new interfaces are created？（）
    A

    No new interface is created.

    B

    Only the st interface is created.

    C

    fxp1， fab0， and fab1 are created.

    D

    st，fxp1，reth，fab0，and fab1 are created.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    You have just created a new VLAN on your network for inter-VLAN routing.  What is one step that you should include in your VLAN-based implementation and verification plan？（）
    A

    Verify that different native VLANs exist between two switches for security purposes.

    B

    Verify that the switch is configured to allow for trunking on the switch ports.

    C

    Verify that each switch port has the proper IP address space assigned to it for the new VLAN. 

    D

    Verify that the VLAN virtual interface has been correctly created and enabled.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）
    A

    Verify that different native VLANs exist between two switches for security purposes.

    B

    Verify that the VLAN was added on all switches with the use of the show vlan command. 

    C

    Verify that the switch is configured to allow for trunking on the switch ports.

    D

    Verify that each switch port has the correct IP address space assigned to it for the new VLAN.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?（）
    A

    More collision domains will be created.

    B

    IP address utilization will be more efficient.

    C

    More bandwidth will be required than was needed previously.

    D

    An additional broadcast domain will be created.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Given that the current directory is empty， and that the user has read and write privileges to the current directory， and the following： Which statement is true？（）
    A

    Compilation fails.

    B

    Nothing is added to the file system.

    C

    Only a new file is created on the file system.

    D

    Only a new directory is created on the file system.

    E

    Both a new file and a new directory are created on the file system.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?()

    A. The VLAN must be created

    B. The VLAN must be named

    C. An IP address and subnet mask must be configured for the new VLAN

    D. The desired ports must be added to the new VLAN

    E. The VLAN must be added to the existing VTP Domain


    参考答案：A, B, D

  • 第14题：

    Which of the following steps are necessary in order to add a new VLAN to a switched network?()

    A. Create the VLAN.

    B. Name the VLAN.

    C. Configure an IP address for the VLAN.

    D. Add the desired ports to the new VLAN.

    E. Add the VLAN to the VTP domain.


    参考答案：A, B, D

  • 第15题：

    Which of the following steps are necessary in order to add a new VLAN to a switched network?（）

    • A、Create the VLAN.
    • B、Name the VLAN.
    • C、Configure an IP address for the VLAN.
    • D、Add the desired ports to the new VLAN.
    • E、Add the VLAN to the VTP domain.

    正确答案:A,B,D

  • 第16题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:C

  • 第17题：

    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）

    • A、Verify that trunked links are configured to allow the VLAN traffic.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
    • D、Verify that different native VLANs exist between two switches for security purposes.

    正确答案:A

  • 第18题：

    Which statement is true about the database and database-user used during installation of IMS Server？（）

    • A、A preexisting database user may be used but a new database has to be created during installation.
    • B、A preexisting database may be used but a new database user has to be created during installation.
    • C、A preexisting database and user may be used or a new database and user are created during installation.
    • D、A preexisting database and user cannot be used； a new database and user are created during  installation.

    正确答案:C

  • 第19题：

    多选题
    An SVI has been configured on a device.  Which two statements are true about a switched virtual interface （SVI）？（）
    A

    An SVI is normally created for the default VLAN （VLAN1） to permit remote switch administration.

    B

    Multiple SVIs can be associated with a VLAN.

    C

    SVI is another name for a routed port.

    D

    An SVI is created by entering the no switchport command in interface configuration mode.

    E

    An SVI provides a default gateway for a VLAN.


    正确答案： B,D
    解析： 暂无解析

  • 第20题：

    多选题
    Which of the following steps are necessary in order to add a new VLAN to a switched network?（）
    A

    Create the VLAN.

    B

    Name the VLAN.

    C

    Configure an IP address for the VLAN.

    D

    Add the desired ports to the new VLAN.

    E

    Add the VLAN to the VTP domain.


    正确答案： B,C
    解析： 暂无解析

  • 第21题：

    多选题
    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）
    A

    The VLAN must be created

    B

    The VLAN must be named

    C

    An IP address and subnet mask must be configured for the new VLAN

    D

    The desired ports must be added to the new VLAN

    E

    The VLAN must be added to the existing VTP Domain


    正确答案： E,D
    解析： 暂无解析

  • 第22题：

    多选题
    An SVI has been configured on a device. Which two statements are true about a switched virtualinterface （SVI）？（）
    A

    An SVI is normally created for the default VLAN （VLAN1） to permit remote switchadministration

    B

    Multiple SVIs can be associated with a VLAN

    C

    SVI is another name for a routed port

    D

    An SVI is created by entering the no switchport command in interface configuration mode

    E

    An SVI provides a default gateway for a VLAN


    正确答案： B,D
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement is true about the database and database-user used during installation of IMS Server？（）
    A

    A preexisting database user may be used but a new database has to be created during installation.

    B

    A preexisting database may be used but a new database user has to be created during installation.

    C

    A preexisting database and user may be used or a new database and user are created during installation.

    D

    A preexisting database and user cannot be used； a new database and user are created during  installation.


    正确答案： C
    解析： 暂无解析

相关内容