A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of the 100 branch routers. Which of the following could be true about the number of EIG

题目

A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of the 100 branch routers. Which of the following could be true about the number of EIGRP neighbor ships?（）

  • A、A partial mesh totaling 100: one between the central - site router and each of the 100 branches.
  • B、A full mesh  -  (101 * 100) / 2 = 5050 - One neighborship between each pair of routers.
  • C、101 - One between each router (including the central site) a nd its nearby PE router.
  • D、None of the answers is correct.
相似考题

1.You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy.How would you accomplish this task?（）A. Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.B. Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.C. Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.D. Configure a policy map that has a violate-action to change the DE bit from 0 to 1.

2.A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?()A. Router(config-if)# encapsulation frame-relay q933aB. Router(config-if)# encapsulation frame-relay ansiC. Router(config-if)# encapsulation frame-relay ietfD. Router(config-if)# encapsulation frame-relay islE. None of the above

3.A new frame－relay network is being implemented and inverse ARP does not appear to be operating correctly. Which alternative command can be used to provide connectivity?()A. frame-relay arpB. frame-relay mapC. frame-relay interface-dlciD. frame-relay lmi-typeE. frame-relay pvc

4.Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? ()A. frame-relay arpB. frame-relay mapC. frame-relay interface-dlciD. frame-relay lmi-type

更多“A company has a Frame Relay WAN”相关问题

  • 第1题：

    Which three Layer 2 encapsulation types would be used on a WAN rather than a LAN?()

    A.HDLC

    B.Ethernet

    C.Token Ring

    D.PPP

    E.FDDI

    F.Frame Relay


    参考答案：A, D, F

  • 第2题：

    A new frame-relay network is being implemented and inverse ARP does not appear to be operating correctly. Which alternative command can be used to provide connectivity?（）

    • A、frame-relay arp
    • B、frame-relay map
    • C、frame-relay interface-dlci
    • D、frame-relay lmi-type
    • E、frame-relay pvc

    正确答案:B

  • 第3题：

    A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of t he 100 branch routers. All routers use point - to - point subinterfaces and one subnet per PVC. Which of the following is true about OSPF in this design?（）

    • A、The central site router has 100 fully adjacent neighborships with the 100 branches
    • B、The central  site router has neighborships with all branch routers, but fully adjacent neighbors with only two branches
    • C、The central site router has a neighborship with the Frame Relay switcH
    • D、None of the other answers is correct

    正确答案:A

  • 第4题：

    Acme Costume Company is connecting its manufacturing facilties to its stores with a small point-to-multipoint Frame Relay IP WAN. Little growth is expected in the network infrastructure.Up tothis point the company has been using a dial-on-demand network. Dropping WAN costs， however，have led them to consider using a high-speed WAN solution to improve access. Which two routingprotocols could you deploy to support the new larger network while keeping costs down？（）

    • A、 RIP
    • B、 RIPv2
    • C、 EIGRP
    • D、 OSPF

    正确答案:C,D

  • 第5题：

    Customer X has a hub-and-spoke Frame Relay network， with a central office and two branch offices （RemoteA and RemoteB）. Each location has only one physical link to the Frame Relay cloud and RemoteB has a router that is not a Cisco router. Since the installation， there is no connectivity between RemoteB and the central office. What is a possible solution to this issue？ （）

    • A、 Because Frame Relay IETF encapsulation is only configurable at interface level， you must use IETF encapsulation on all routers.
    • B、 This is not a possible scenario. A dedicated Frame Relay link to RemoteB is mandatory at the central office.
    • C、 The router at RemoteB must be replaced by a Cisco router.
    • D、 Use Frame Relay IETF encapsulation on a per-VC basis on the central office router.
    • E、 There is a problem in the Frame Relay cloud， because Cisco routers are compatible with IETF Frame Relay.

    正确答案:D

  • 第6题：

    Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）

    • A、frame-relay arp
    • B、frame-relay map
    • C、frame-relay interface-dlci
    • D、frame-relay lmi-type

    正确答案:B

  • 第7题：

    which command allows you to verify the encapsulation type CISCO OR IETF for a frame relay link?（）

    • A、show frame-relay map
    • B、show frame-relay lmi
    • C、show inter serial
    • D、show frame-relay pvc

    正确答案:C

  • 第8题：

    You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices.   The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers.   You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection.   What should you do？  （）

    • A、 At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.
    • B、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.
    • C、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.
    • D、 At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.

    正确答案:D

  • 第9题：

    单选题
    The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）
    A

    The Gallant router has the wrong LMI type configured

    B

    Inverse ARP is providing the wrong PVC information to the Gallant router

    C

    The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf command

    D

    The frame-relay map statement in the Attalla router for the PVC to Steele is not correct

    E

    The IP address on the serial interface of the Attalla router is configured incorrectly


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Customer X has a hub-and-spoke Frame Relay network， with a central office and two branch offices （RemoteA and RemoteB）. Each location has only one physical link to the Frame Relay cloud and RemoteB has a router that is not a Cisco router. Since the installation， there is no connectivity between RemoteB and the central office. What is a possible solution to this issue？ （）
    A

     Because Frame Relay IETF encapsulation is only configurable at interface level， you must use IETF encapsulation on all routers.

    B

     This is not a possible scenario. A dedicated Frame Relay link to RemoteB is mandatory at the central office.

    C

     The router at RemoteB must be replaced by a Cisco router.

    D

     Use Frame Relay IETF encapsulation on a per-VC basis on the central office router.

    E

     There is a problem in the Frame Relay cloud， because Cisco routers are compatible with IETF Frame Relay.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?（）
    A

    Router(config-if)# encapsulation frame-relay q933a

    B

    Router(config-if)# encapsulation frame-relay ansi

    C

    Router(config-if)# encapsulation frame-relay ietf

    D

    Router(config-if)# encapsulation frame-relay isl

    E

    None of the above


    正确答案： E
    解析： 暂无解析

  • 第12题：

    Which command can be used to verify the DLCI destination address in a Frame Relay static configuration?()

    A.show frame-relay end-to-end

    B.show frame-relay map

    C.show frame-relay lmi

    D.show frame-relay pvc


    参考答案：B

  • 第13题：

    What does FRTP stand for？（）

    • A、Frame Relay Top Pseudowire
    • B、Frame Relay Traffic Pseudowire
    • C、Frame Relay Traffic Protocol
    • D、Frame Relay Traffic Policing

    正确答案:D

  • 第14题：

    The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）

    • A、The Gallant router has the wrong LMI type configured
    • B、Inverse ARP is providing the wrong PVC information to the Gallant router
    • C、The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf command
    • D、The frame-relay map statement in the Attalla router for the PVC to Steele is not correct
    • E、The IP address on the serial interface of the Attalla router is configured incorrectly

    正确答案:D

  • 第15题：

    Which command can be used to verify the DLCI destination address in a Frame Relay static configuration?（）

    • A、show frame-relay end-to-end
    • B、show frame-relay map
    • C、show frame-relay lmi
    • D、show frame-relay pvc

    正确答案:B

  • 第16题：

    A default Frame Relay WAN is classified as what type of physical network（）。

    • A、point-to-point
    • B、broadcast multi-access
    • C、nonbroadcast multi-access
    • D、nonbroadcast multipoint
    • E、broadcast point-to-multipoint

    正确答案:C

  • 第17题：

    Which three Layer 2 encapsulation types would be used on a WAN rather than a LAN? (Choose three.)（）

    • A、HDLC
    • B、Ethernet
    • C、Token Ring
    • D、PPP
    • E、FDDI
    • F、Frame Relay

    正确答案:A,D,F

  • 第18题：

    Which three Layer 2 encapsulation types would be used on a WAN rather than a LAN? （）

    • A、HDLC
    • B、Ethernet
    • C、Token Ring
    • D、PPP
    • E、FDDI
    • F、Frame Relay

    正确答案:A,D,F

  • 第19题：

    单选题
    You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices.   The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers.   You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection.   What should you do？  （）
    A

     At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.

    B

     At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.

    C

     At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.

    D

     At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    You are working with a client to deploy QoS on their Frame Relay WAN. They would like to be able to allow packets to cross the Frame Relay WAN but have them marked as discard eligible if they exceed the QoS policy. How would you accomplish this task?（）
    A

    Configure a class map that sets the DE bit so that the policy map can correctly apply a violate-action if the policy is exceeded.

    B

    Configure a service policy that sets the DE bit and apply it to the serial interface connected to the Frame Relay WAN.

    C

    Configure a policy map that has a burst-max action of setting the DE bit if the policy is exceeded.

    D

    Configure a policy map that has a violate-action to change the DE bit from 0 to 1.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of t he 100 branch routers. All routers use point - to - point subinterfaces and one subnet per PVC. Which of the following is true about OSPF in this design?（）
    A

    The central site router has 100 fully adjacent neighborships with the 100 branches

    B

    The central  site router has neighborships with all branch routers, but fully adjacent neighbors with only two branches

    C

    The central site router has a neighborship with the Frame Relay switcH

    D

    None of the other answers is correct


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    A default Frame Relay WAN is classified as what type of physical network（）。
    A

    point-to-point

    B

    broadcast multi-access

    C

    nonbroadcast multi-access

    D

    nonbroadcast multipoint

    E

    broadcast point-to-multipoint


    正确答案： C
    解析： 暂无解析

相关内容