A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless carD.The client section of the access point does not list any active WLAN clients. What is a possible reason for this?（）A、The incorrect channel is configured on the client.B、The clie

题目

A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless carD.The client section of the access point does not list any active WLAN clients. What is a possible reason for this?（）

  • A、The incorrect channel is configured on the client.
  • B、The client's IP address is on the wrong subnet.
  • C、The client has an incorrect pre-shared key.
  • D、The SSID is configured incorrectly on the client.
相似考题

1.When verifying a new wireless installation the administrator is unable to see a wireless signal withany wireless laptop. The MOST likely problem is:()A. The SSID is not set to broadcastB. An incorrect channel is being usedC. Incorrect client security settings are configuredD. Incorrect client configuration on the laptops

2.Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.Which two actions should you perform?()A.AB.BC.CD.DE.E

3.You are unable to connect your computer to a wireless network projector. The wireless network projector does not appear in the list of available network projectors provided by the Connect to a Network Projector wizard.You need to connect to the network projector.What are two possible ways to achieve this goal?（）A.AB.BC.CD.D

4.Your computer has a wireless network adapter installed. However, the computer fails to connect to the wireless network. You need to ensure that the computer is able to connect to the wireless network.What should you do?（）A.AB.BC.CD.D

更多“A wireless client cannot connect”相关问题

  • 第1题：

    A new building has been added to the enterprise campus network， providing client access for desktop PCs， laptops， and IP phones for employees and guests. During verification， only a few laptops using  wireless are reported to have problems， while other desktops， IP phones， and most other wireless laptops are fully operational. Additional information received about the problem indicates that， while the problematic wireless laptops cannot reach internal corporate websites， they can reach the Internet.  Where should troubleshooting about this connectivity issue be focused？（）

    • A、client network configuration
    • B、VLAN mapping
    • C、routing protocols
    • D、first-hop redundancy protocol

    正确答案:A

  • 第2题：

    A technician is able to connect to the Internet but cannot connect to a remote machine through Remote Desktop in Windows XP. Each time the technician attempts to connect to a remote location, the software times out. Which of the following is the MOST likely problem?（）

    • A、The Java applet is disabled in the web browser.
    • B、Deny all has not been configured in the firewall.
    • C、Wireless network drivers are corrupt.
    • D、Port forwarding settings are not correct

    正确答案:D

  • 第3题：

    Which two statements about the Cisco Aironet Desktop Utility (ADU) are true（）

    • A、The Aironet Desktop Utility （ADU ）profile manager feature can create and manage only one profile for the wireless client adapter.
    • B、The Aironet Desktop Utility (ADU) can support only one wireless client adapter installed and used at a time.
    • C、The Aironet Desktop Utility (ADU) can be used to establish the association between the client adapter and the access point , manage authentication to the wireless network , and enable encryption.
    • D、The Aironet Desktop Utility (ADU) and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.

    正确答案:B,C

  • 第4题：

    A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless card. The client section of the access point does not list any active WLAN clients. What is a possible reason for this?（）

    • A、The incorrect channel is configured on the client.
    • B、The client's IP address is on the wrong subnet.
    • C、The client has an incorrect pre-shared key.
    • D、The SSID is configured incorrectly on the client.

    正确答案:D

  • 第5题：

    Mike, a technician, is installing a wireless router for a client. Which of the following is MOST important when installing a wireless router?（）

    • A、Location
    • B、DCPA
    • C、SSID
    • D、Number of client machines

    正确答案:A

  • 第6题：

    A technician installed a new wireless access point on an existing small office home office (SOHO) network with a selective security option enabled. All wireless computers connect to the new network except one computer that cannot connect to the wireless network. Which of the following is the cause?（）

    • A、The network uses MAC filtering
    • B、The network uses WEP
    • C、The network uses SSID broadcast
    • D、The network uses WPA

    正确答案:A

  • 第7题：

    All client computers on your company network run Windows 7 and are members of an Active Directory Domain Services domain. Employees using portable computers report that they get connected to a coffee shop wireless network from the company conference room. You need to ensure that the employees connect to the company wireless network by default from anywhere within the company premises. What should you do?（）

    • A、Configure the Network authentication (Shared mode) setting.
    • B、Apply a Wireless Network Policy to set the network type to WPA-PSK.
    • C、Apply a Wireless Network Policy to automatically connect to the company wireless network.
    • D、Apply a Wireless Network Policy to set the company wireless network as the preferred network.

    正确答案:D

  • 第8题：

    多选题
    Which two statements about the Cisco Aironet Desktop Utility (ADU) are true（）
    A

    The Aironet Desktop Utility （ADU ）profile manager feature can create and manage only one profile for the wireless client adapter.

    B

    The Aironet Desktop Utility (ADU) can support only one wireless client adapter installed and used at a time.

    C

    The Aironet Desktop Utility (ADU) can be used to establish the association between the client adapter and the access point , manage authentication to the wireless network , and enable encryption.

    D

    The Aironet Desktop Utility (ADU) and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.


    正确答案： C,D
    解析： 暂无解析

  • 第9题：

    单选题
    A technician installed a new wireless access point on an existing small office home office (SOHO) network with a selective security option enabled. All wireless computers connect to the new network except one computer that cannot connect to the wireless network. Which of the following is the cause?（）
    A

    The network uses MAC filtering

    B

    The network uses WEP

    C

    The network uses SSID broadcast

    D

    The network uses WPA


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    A user replaces a laptop’s wireless PCMCIA card with a different vendor’s card. All of the new card configuration steps have been followed. The OS sees all known wireless networks but cannot connect to the user’s network. Which of the following is the MOST likely reason for this behavior?（）
    A

    DMZ is enabled.

    B

    MAC filtering is enabled.

    C

    WEP is being used.

    D

    SSID broadcast is disabled.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Your network contains a wired network and a wireless network. Users report that they experience intermittent problems accessing network resources when they connect to the internal wireless network. You discover that an unsecured rogue wireless access point uses the same Service Set Identifier (SSID) as the internal wireless network. You need to ensure that the users only connect to the internal wireless network. What should you do?（）
    A

    Configure a Windows Connect Now Group Policy.

    B

    Configure a Wireless Network (IEEE 802.11) Policy.

    C

    Delete the rogue network from the Network and Sharing Center on each computer.

    D

    Create a Connection Manager Administration Kit (CMAK) profile and deploy it to all users.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless carD.The client section of the access point does not list any active WLAN clients. What is a possible reason for this?（）
    A

    The incorrect channel is configured on the client.

    B

    The client's IP address is on the wrong subnet.

    C

    The client has an incorrect pre-shared key.

    D

    The SSID is configured incorrectly on the client.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which two statements about the Cisco Aironet Desktop Utility （ADU） are true？ （Choose two.）（）  

    • A、 The Aironet Desktop Utility （ADU） can be used to establish the association between the client adapter  and the access point， manage authentication to the wireless network， and enable data encryption.
    • B、 The Aironet Desktop Utility （ADU） and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.
    • C、 The Aironet Desktop Utility （ADU） can support only one wireless client adapter installed and used at a  time.
    • D、 The Aironet Desktop Utility （ADU） profile manager feature can create and manage only one profile for the wireless client adapter.
    • E、 When the user selects a different profile in the Aironet Desktop Utility （ADU）， the settings for the wireless client adapter are changed only after a reboot.

    正确答案:A,C

  • 第14题：

    Your computer has a wireless network adapter installed. However， the computer fails to connect to the wireless network.  You need to ensure that the computer is able to connect to the wireless network.  What should you do？（）

    • A、Change the Network Category setting of the wireless connection to Public.
    • B、Enable the Internet Connection Sharing feature on the wireless network adapter.
    • C、Rename the wireless network adapter to match the Service Set Identifier （SSID） of the wireless network.
    • D、Configure the wireless network adapter to connect to the appropriate wireless network from the Connect to a network list.

    正确答案:D

  • 第15题：

    Which statement is correct for the LWAPP/CAPWAP AP upstream encapsulated frame for a WMM-associated client frame that is centrally switched running v5.2?（）

    • A、Wireless client WMM UP classification is translated to a wired DSCP priority.
    • B、Wireless client 802.11p classification is translated to a wired DSCP priority.
    • C、Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
    • D、Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.

    正确答案:A

  • 第16题：

    Under which three conditions does a client initiate roaming between wireless cells in the Company  WLAN？ （）

    • A、 The access point has broadcast too many SSIDs.
    • B、 The wireless client has missed too many beacons from the access point.
    • C、 The maximum data retry count， initiated by the wireless client， is exceeded.
    • D、 The wireless client has reduced the data rate.
    • E、 The access point has requested client reauthentication.
    • F、 The wireless client has missed too many IAPP （Inter Access Point Protocol） updates.

    正确答案:B,C,D

  • 第17题：

    When verifying a new wireless installation the administrator is unable to see a wireless signal withany wireless laptop. The MOST likely problem is:（）

    • A、The SSID is not set to broadcast
    • B、An incorrect channel is being used
    • C、Incorrect client security settings are configured
    • D、Incorrect client configuration on the laptops

    正确答案:A

  • 第18题：

    Your company’s network includes client computers that run Windows 7. You design a wireless network to use Extensible Authentication Protocol-Transport Level Security （EAP-TLS）.   The Network Policy Server has a certificate installed.   Client computers are unable to connect to the wireless access points.    You need to enable client computers to connect to the wireless network.   What should you do？（）

    • A、Configure client computers to use Protected Extensible Authentication Protocol-Microsoft Challenge Handshake Authentication Protocol version 2 （PEAP-MS-CHAP v2）.
    • B、Configure client computers to use Protected Extensible Authentication Protocol-Transport Layer Security （PEAP-TLS）.
    • C、Install a certificate in the Trusted Root Certification Authorities certificate store.
    • D、Install a certificate in the Third-Party Root Certification Authorities certificate store.

    正确答案:C

  • 第19题：

    ertkiller .com has purchased laptop computers that will be used to connect to a wireless network. You create a laptop organizational unit and create a Group Policy Object （GPO） and configure user profiles by utilizing the names of approved wireless networks. You link the GPO to the laptop organizational unit. The new laptop users complain to you that they cannot connect to a wireless network.  What should you do to enforce the group policy wireless settings to the laptop computers（）

    • A、Execute gpupdate/target：computer command at the command prompt on laptop computers
    • B、Execute Add a network command and leave the SSID （service set identifier） blank
    • C、Execute gpupdate/boot command at the command prompt on laptops computers
    • D、Connect each laptop computer to a wired network and log off the laptop computer and then login again.
    • E、None of the above

    正确答案:D

  • 第20题：

    多选题
    Under which three conditions does a client initiate roaming between wireless cells in the Company  WLAN？ （）
    A

    The access point has broadcast too many SSIDs.

    B

    The wireless client has missed too many beacons from the access point.

    C

    The maximum data retry count， initiated by the wireless client， is exceeded.

    D

    The wireless client has reduced the data rate.

    E

    The access point has requested client reauthentication.

    F

    The wireless client has missed too many IAPP （Inter Access Point Protocol） updates.


    正确答案： D,C
    解析： 暂无解析

  • 第21题：

    单选题
    ertkiller .com has purchased laptop computers that will be used to connect to a wireless network. You create a laptop organizational unit and create a Group Policy Object （GPO） and configure user profiles by utilizing the names of approved wireless networks. You link the GPO to the laptop organizational unit. The new laptop users complain to you that they cannot connect to a wireless network.  What should you do to enforce the group policy wireless settings to the laptop computers（）
    A

    Execute gpupdate/target：computer command at the command prompt on laptop computers

    B

    Execute Add a network command and leave the SSID （service set identifier） blank

    C

    Execute gpupdate/boot command at the command prompt on laptops computers

    D

    Connect each laptop computer to a wired network and log off the laptop computer and then login again.

    E

    None of the above


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    When verifying a new wireless installation the administrator is unable to see a wireless signal withany wireless laptop. The MOST likely problem is:（）
    A

    The SSID is not set to broadcast

    B

    An incorrect channel is being used

    C

    Incorrect client security settings are configured

    D

    Incorrect client configuration on the laptops


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You install a wireless router and disable the Service Set Identifier （SSID） broadcast feature. You need to configure your computer to connect to the wireless network.  What should you do？ （）
    A

    Click the Connect to a network link， right-click the appropriate network， and then click the Connect option.

    B

    Click the View computers and devices link， right-click the wireless router， and then click the Enable option.

    C

    Click the Set up a connection or network link， and then click the Set up a wireless Ad hoc network option.

    D

    Click the Set up a connection or network link， and then click the Manually connect to a wireless network option.


    正确答案： A
    解析： 暂无解析

  • 第24题：

    多选题
    Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.  Which two actions should you perform？（）
    A

    Right-click and click the Diagnose option in the Connect to a network window.

    B

    Set the security type value to No authentication in the wireless network properties dialog box.

    C

    Click the Manually connect to a wireless network option in the Set up a connection or network window.

    D

    In the Wireless Network properties dialog box， click the Connect even if the network is not broadcasting option.

    E

    Configure the correct IP address， subnet mask， and default gateway for the target network in the wireless network connection properties dialog box.


    正确答案： A,D
    解析： 暂无解析

相关内容