VLAN 3 is not yet configured on your switch. What happens if you set the switchport access vlan3 commmand interface configuration mode？（）A、The command is accepted and the respective VLAN is added to vlan dat.B、The command is rejected.C、The command is acce

题目

VLAN 3 is not yet configured on your switch. What happens if you set the switchport access vlan3 commmand interface configuration mode？（）

  • A、The command is accepted and the respective VLAN is added to vlan dat.
  • B、The command is rejected.
  • C、The command is accepted and you must configure the VLAN manually.
  • D、The port turns amber.
相似考题

1.Which three statements about VTP features are true?()A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistenciesB.Each broadcast domain on a switch can have its own unique VTP domainC.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.E.VTP pruning is used to increase available bandwidth in trunk linksF.Client,server,and transparent are valid VTP modesG. To configure a switch to be part of two VTP domains,each domain must have its own passwords

2.Which statement about vlan operation on cisco catalyst switches is true?（）A、when a packet is received from an 802.1Q trunk,the vlan id can be determined from the source MAC address table.B、unkown unicast frames are retransmitted only to the ports that belong to the same vlanC、ports between switches should be configured in access mode so that vlans can span across the portsD、broadcast and multicast frames are retransmitted to ports that are configured on different vlan.

3.When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link（）。A、By default, all defined VLANs are allowed on the trunk.B、Each single VLAN, or VLAN range, must be specified with the switchport mode command.C、Each single VLAN, or VLAN range, must be specified with the vtp domain command.D、Each single VLAN, or VLAN range, must be specified with the vlan database command.

4.A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）A、The VLAN must be createdB、The VLAN must be namedC、An IP address and subnet mask must be configured for the new VLAND、The desired ports must be added to the new VLANE、The VLAN must be added to the existing VTP Domain

更多“VLAN 3 is not yet configured on ”相关问题

  • 第1题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第2题：

    VLAN 3 is not yet configured on your switch.What happens if you set the switchport access vlan 3 commmand interface configuration mode?（）

    • A、The command is accepted and the respective VLAN is added to vlan dat.
    • B、The command is rejected.
    • C、The command is accepted and you must configure the VLAN manually.
    • D、The port turns amber.

    正确答案:A

  • 第3题：

    A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）

    • A、The switch that will share the VLAN information must be in the VTP Server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be configured to use the same VTP version.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must be configured to use the same type of ID tagging.
    • G、The switches must be connected over VLAN trunks.

    正确答案:A,B,F

  • 第4题：

    Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）

    • A、Reverse ARP
    • B、Full duplex on the fiber link
    • C、PoE
    • D、802.1q trunking

    正确答案:D

  • 第5题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： A,B,D
    解析： 暂无解析

  • 第6题：

    单选题
    VLAN 3 is not yet configured on your switch.What happens if you set the switchport access vlan 3 commmand interface configuration mode?（）
    A

    The command is accepted and the respective VLAN is added to vlan dat.

    B

    The command is rejected.

    C

    The command is accepted and you must configure the VLAN manually.

    D

    The port turns amber.


    正确答案： A
    解析： 暂无解析

  • 第7题：

    多选题
    Which three statements about VTP features are true?（）
    A

    When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies

    B

    Each broadcast domain on a switch can have its own unique VTP domain

    C

    VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.

    D

    When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.

    E

    VTP pruning is used to increase available bandwidth in trunk links

    F

    Client,server,and transparent are valid VTP modes

    G

    To configure a switch to be part of two VTP domains,each domain must have its own passwords


    正确答案： G,D
    解析： 暂无解析

  • 第8题：

    单选题
    VLAN 3 is not yet configured on your switch. What happens if you set the switchport access vlan3 commmand interface configuration mode？（）
    A

    The command is accepted and the respective VLAN is added to vlan dat.

    B

    The command is rejected.

    C

    The command is accepted and you must configure the VLAN manually.

    D

    The port turns amber.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）

    • A、Verify that trunked links are configured to allow the VLAN traffic.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
    • D、Verify that different native VLANs exist between two switches for security purposes.

    正确答案:A

  • 第10题：

    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:A

  • 第11题：

    An 802.1X client cannot authenticate to an autonomous access point configured for multiple VLANs. The native VLAN does not have an SSID configured. Which one of the following links being down would prevent the clients from authenticating？（）

    • A、between the RADIUS and the access point
    • B、between the client’s VLAN and the WLSE
    • C、between the native VLAN and the WLSE
    • D、between the client’s VLAN and the RADIUS

    正确答案:A

  • 第12题：

    单选题
    Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）
    A

    Reverse ARP

    B

    Full duplex on the fiber link

    C

    PoE

    D

    802.1q trunking


    正确答案： B
    解析： 暂无解析

  • 第13题：

    单选题
    Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）
    A

    The access link needs to be configured in multiple VLANs.

    B

    The link between the switches is configured in the wrong VLAN.

    C

    The link between the switches needs to be configured as a trunk.

    D

    VTP is not configured to carry VLAN information between the switches.

    E

    Switch IP addresses must be configured in order for traffic to be forwarded between the switches


    正确答案： D
    解析： 暂无解析

  • 第14题：

    多选题
    Which three statements are typical characteristics of VLAN arrangements?（）
    A

    A new switch has no VLANs configured.

    B

    Connectivity between VLANs requires a Layer 3 device.

    C

    VLANs typically decrease the number of collision domains.

    D

    Each VLAN uses a separate address space.

    E

    A switch maintains a separate bridging table for each VLAN.

    F

    VLANs cannot span multiple switches.


    正确答案： F,E
    解析： 暂无解析

  • 第15题：

    多选题
    A new VLAN needs to be created for an existing network. Which of the following are the minimum tasks that must be accomplished in order to create the new VLAN?（）
    A

    The VLAN must be created

    B

    The VLAN must be named

    C

    An IP address and subnet mask must be configured for the new VLAN

    D

    The desired ports must be added to the new VLAN

    E

    The VLAN must be added to the existing VTP Domain


    正确答案： E,D
    解析： 暂无解析

相关内容