A.Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link - local addresses used by PIMv2 and IGMPv3
B.Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used toget her
C.Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1
D.Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers
E.The a dministratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses
F.Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA
第1题:
Which two statements are true about overflow pools?()
第2题:
Which three IP multicast group concepts are true?()
第3题:
Which three IP multicast group concepts are true? (Choose three.) ()
第4题:
Which two statements are true about the primary address on an interface?()
第5题:
Which two statements are true of a network mask?()
第6题:
If a packet is sent to a multicast group address, all members of the multicast group will receive it
If a packet is sent to a multicast group address, the multicast frame contains the source multicast address
A router does not have to be a member of a multicast group to receive multicast data.
A router does not have to be a member of a multicast group to send to the group.
A router must be a member of a multicast group to receive multicast data.
A router must be a member of a multicast group to send to the group.
第7题:
EIGRP supports five generic packet types, including hello, database description (DBD), link state request (LSR), link - state update (LSU), and LSAck.
EIGRP sends periodic hello packets to the multicast IP address 224.0.0.10.
EIGRP will not form a neighbor relationship with another peer when their K values are mismatched.
EIGRP sends periodic hello packets to the multicast IP address 224.0.0.9.
E IGRP will form a neighbor relationship with another peer even when their K values are mismatched.
EIGRP supports five generic packet types, including hello, update, query, reply, and ACK packets.
第8题:
Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link - local addresses used by PIMv2 and IGMPv3
Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used toget her
Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1
Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers
The a dministratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses
Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA
第9题:
Multicast addresses 224.0.1.0 through 238.255.255.255 are called globally scoped addresses. They are used to multicast data between organizations and across the Internet
The multicast address 224.0.0.1 is a globally scoped address that has been reserved for the Network Time Protocol (NTP) by the IANA
Multicast addresses 239.0.0.0 through 239.255.255.255 are called limited scope addresses. They are constrained to a local group or organization
Multicast addresses 224.0.0.5 and 224.0.0.6 are limited scoped addresses that have been reserved for OSPF
Multicast addresses 224.0.0.0 through 224.0.0.255 are used for network protocols on local LAN segments. Because they are always transmitted with a Time to Live (TTL) of 1, they are never forwarded by a router
第10题:
It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.
You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.
It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.
By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.
第11题:
Transparent mode is layer 2.
Routed mode is layer 3.
Routed mode has 1 IP address.
Transparent mode has 1 IP address.
第12题:
MSDP is running between anycast RPs
Anycast RP provides redundancy and load-sharing capabilities
Multicast BGP is running between anycast RPs
In anycast RP,two or more RPs are configured with the same multicast IP address on loopback interfaces
In anycast RP,two or more RPs are configured with the same unicast IP address on loopback interfaces
第13题:
Which three attributes are carried in a source active message?()
第14题:
Which three statements about anycast RP are true? ()
第15题:
Which three IP multicast related statements are true? (Choose three.) ()
第16题:
Which two statements are true of a network mask?()
第17题:
Which two statements are true about the primary address on an interface?()
第18题:
Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1.
Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers.
Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link-local addresses used by PIMv2 and IGMPv3.
Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used together.
Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA
The administratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses.
第19题:
A subnet mask specifies the portion of an IP address that is in a binary format
A subnet mask specifies the portion of an IP address that is in a decimal format
A subnet mask specifies the portion of an IP address that represents a network prefix
A subnet mask specifies the portion of an IP address that represetns network hosts
第20题:
If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.
A router does not have to be a member of a multicast group to receive multicast data.
A router must be a member of a multicast group to send to the group.
A router does not have to be a member of a multicast group to send to the group.
If a packet is sent to a multicast group address, all members of the multicast group will rece ive it.
A router must be a member of a multicast group to receive multicast data.
第21题:
It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface
You use the primary address when you have multiple IP addresses belonging to the same subnet on the same inteface
It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface
By default, the primary address on an interface is selected as the nmerically highest local address configured on the interface
第22题:
A subnet mask specifies the portion of an IP address that is in a binary format.
A subnet mask specifies the portion of an IP address that is in a decimal format.
A subnet mask specifies the portion of an IP address that represents a network prefix.
A subnet mask specifies the portion of an IP address that represents network hosts.
第23题:
There are three IGMP modes: dense mode, sparse mode, and sparse - dense mode
IGMP is used to register individual hosts with a multicast group
IGMP version 3 enables a multicast receiving host to specify to the router which sources it should forward traffic from
IGMP messages a re IP datagrams with a protocol value of 2, destination address of 224.0.0.2, and a TTL value of 1
IGMP is a multicast routing protocol that makes packet - forwarding decisions independent of other routing protocols such as EIGRP
IGMP snooping ru ns on Layer 3 routers
第24题:
If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.
A router does not have to be a member of a multicast group to recei ve multicast data.
A router must be a member of a multicast group to send to the group.
A router does not have to be a member of a multicast group to send to the group.
If a packet is sent to a multicast group address, all members of the multic ast group will receive it.
A router must be a member of a multicast group to receive multicast data.