The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（）P 10.11.1.0/24, 2 successors, FD is 2172419via 10.1.1

题目

The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（）P 10.11.1.0/24, 2 successors, FD is 2172419via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1via 10.1.1.6 (2172423/28167), Serial0/0/0.2

A.0

B.1

C.2

D.3

相似考题

1.The following output occurs on Router R1. Which of the following cannot be determine d from this output?（）R1 show ip route 180.1.1.0 255.255.255.240Routing entry for 180.1.1.0/28Known via "bgp 2", distance 20, metric 0Tag 3, type externalLast update from 192.168.1.2 00:10:27 agoRouting Descriptor Blocks:* 192.168.1.2, from 19 2.168.1.2, 00:10:27 agoRoute metric is 0, traffic share count is 1AS Hops 2Route tag 3A. The type of BGP peer (iBGP or eBGP) that advertised this route to R1B. R1‘s ASNC. The next - hop router‘s ASND. The AS_Path length

2.Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1‘s decision of what r outes to add to the IP routing table?Note that RD refers to reported distance and FD to feasible distanc E.（）A. Adds all routes for which the metric is <= 200 * the best metric among all routesB. Adds all routes because of the ridiculously high variance settingC. Adds all successor and feasible successor routesD. Adds all successor and feasible successor routes for which the metric is<=200 * the best metric among all routes

3.A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）A. show ip eigrp topologyB. show ip eigrp topology all - linksC. show ip route eigrpD. show ip route eigrp all - linksE. show ip eigrp topology all - learned

4.On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24

更多“The output of s how ip eigrp topology on Router R1 shows the following output, which is al ”相关问题

  • 第1题：

    Refer to the exhibit. BigBids Incorporated is a worldwide auction provider. The network uses EIGRP as its routing protocol throughout the corporation. The network administrator does not understand the convergence of EIGRP. Using the output of the show ip eigrp topology all - links command, answer the administrator‘s questions.Which three networks is the router at 172.17.10.2 directly connected to?（）

    A. 172.17.0.0/30

    B. 172.17.1.0/24

    C. 172.17.2.0/24

    D. 172.17.3 .0/25

    E. 172.17.3.128/25

    F. 172.17.10.0/24


    参考答案：C, E, F

  • 第2题：

    After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C. The following output is shown:What information can you determine about this network?()

    A. The network is stable

    B. There is a flapping link or interface, and router C knows an alternate path to the network

    C. There is a flapping link or interf ace, and router C does not know an alternate path to the network

    D. EIGRP is not working correctly on router C

    E. There is not enough information to make a determination


    参考答案：B

  • 第3题：

    Based on the exhibited output, which three statements are true?()

    A. The route to 10.2.0.0/16 was redistributed into EIGRP.

    B. A default route has been redistributed into the EIGRP autonomous system.

    C. R1 is configured with the ip summary - address command.

    D. R1 is sourcing a n external EIGRP route from Null0.

    E. The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.

    F. R1 is configured with the variance command.


    参考答案：B, C, F

  • 第4题：

    Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command. Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）

    • A、10.10.32.0/19
    • B、10.10.44.0/22
    • C、10.10.40.96/27
    • D、10.10.48.0/23
    • E、10.10.60.0/30

    正确答案:D,E

  • 第5题：

    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)

    • A、R1 is the router that redistributed the route
    • B、R1's metric to reach subnet 10.2.2.0/24 is 64
    • C、The route was redistributed on a router that has a router ospf 1 command configured
    • D、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

    正确答案:C

  • 第6题：

    Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）

    • A、By adding all subnets listed by the show ip route connected command
    • B、By adding the subnets of working interfaces over which static neighbors have been defined
    • C、By adding subnets redistributed on the local router from another routing source
    • D、By adding all subnets listed by the show ip route static command

    正确答案:B,C

  • 第7题：

    Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2. Which answer gives the reason for the omission？（）

    • A、R1 has EIGRP neighbors reachable via S0/0 and  S0/1, but not via S0/2, so it is not included.
    • B、S0/2 may currently be in a state other than up/up.
    • C、The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.
    • D、S0/2 may be configured as a passive inter face.

    正确答案:B

  • 第8题：

    Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）

    • A、R1 has been configured with an ip default- network 2.0.0.0 command.
    • B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
    • C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
    • D、Another router has been configured with an ip default - network 2.0.0.0 command.
    • E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

    正确答案:D

  • 第9题：

    单选题
    The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18
    A

    This router has set the Weight of this route to 10.

    B

    This router's BGP table lists this route as an iBGP route.

    C

    This router's MED has been set to 10.

    D

    This router's BGP table lists an AS_Path length of 10 for this route.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2. Which answer gives the reason for the omission？（）
    A

    R1 has EIGRP neighbors reachable via S0/0 and  S0/1, but not via S0/2, so it is not included.

    B

    S0/2 may currently be in a state other than up/up.

    C

    The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.

    D

    S0/2 may be configured as a passive inter face.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）
    A

    R1 has been configured with an ip default- network 2.0.0.0 command.

    B

    R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.

    C

    R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

    D

    Another router has been configured with an ip default - network 2.0.0.0 command.

    E

    Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）
    A

    show ip eigrp topology

    B

    show ip eigrp topology all - links

    C

    show ip route eigrp

    D

    show ip route eigrp all - links

    E

    show ip eigrp topology all - learned


    正确答案： B
    解析： 暂无解析

  • 第13题：

    According to the following output, can you tell me which command can redistribute IGRP into EIGRP?()

    A. Under t he router eigrp mode add redistribute igrp 123 subnets

    B. Under the router igrp mode add redistribute eigrp 123

    C. None, EIGRP and IGRP are automatically redistributed in this instance.

    D. Under the router eigrp mode add redistribute igrp 123


    参考答案：C

  • 第14题：

    Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

    A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24

    B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0

    C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable

    D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24


    参考答案：D

  • 第15题：

    Router R1 uses S0/0 to connect via a T/1 to the Frame Relay servicE. Five PVCs terminate on the serial link. Three PVCs (101, 102, and 103) are configured on subinterface S0/0.1, and one each (104 and 105) are on S0/0 .2 and S0/0.3. The configuration shows no configuration related to EIGRP WAN bandwidth control, and the bandwidth command is not configured at all. Which of the following is true about how IOS tries to limit EIGRP's use of bandwidth on S0/0?（）

    • A、R1 limi ts EIGRP to around 250Kbps on DLCI 102
    • B、R1 limits EIGRP to around 250Kbps on DLCI 104
    • C、R1 limits EIGRP to around 150Kbps on every DLCI
    • D、R1 does not limit EIGRP because noWAN bandwidth control has been configured

    正确答案:A

  • 第16题：

    Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100

    • A、The output describes the contents of a Type 5 LSA
    • B、3.3.3.3 identifies a ro uter as being the router performing redistribution
    • C、R1's metric for its best route to reach the router with RID 9.9.9.9 is 100
    • D、The router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100

    正确答案:D

  • 第17题：

    Router R1 lists 4 routes for subnet 10.1.1.0/24 in the output of the show ip eigrp topology all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1's decision of what r outes to add to the IP routing table? Note that RD refers to reported distance and FD to feasible distanc E.（）

    • A、Adds all routes for which the metric is <= 200 * the best metric among all routes
    • B、Adds all routes because of the ridiculously high variance setting
    • C、Adds all successor and feasible successor routes
    • D、Adds all successor and feasible successor routes for which the metric is<=200 * the best metric among all routes

    正确答案:D

  • 第18题：

    The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18

    • A、This router has set the Weight of this route to 10.
    • B、This router's BGP table lists this route as an iBGP route.
    • C、This router's MED has been set to 10.
    • D、This router's BGP table lists an AS_Path length of 10 for this route.

    正确答案:C

  • 第19题：

    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）

    • A、show ip eigrp topology
    • B、show ip eigrp topology all - links
    • C、show ip route eigrp
    • D、show ip route eigrp all - links
    • E、show ip eigrp topology all - learned

    正确答案:B

  • 第20题：

    The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（） P 10.11.1.0/24, 2 successors, FD is 2172419 via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1 via 10.1.1.6 (2172423/28167), Serial0/0/0.2

    • A、0
    • B、1
    • C、2
    • D、3

    正确答案:A

  • 第21题：

    多选题
    Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command. Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）
    A

    10.10.32.0/19

    B

    10.10.44.0/22

    C

    10.10.40.96/27

    D

    10.10.48.0/23

    E

    10.10.60.0/30


    正确答案： C,B
    解析： 暂无解析

  • 第22题：

    多选题
    On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
    A

    show ip route

    B

    show ip eigrp topology

    C

    show ip ospf topology

    D

    show ip eigrp topology 10.1.1.0/24


    正确答案： D,C
    解析： 暂无解析

  • 第23题：

    单选题
    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)
    A

    R1 is the router that redistributed the route

    B

    R1's metric to reach subnet 10.2.2.0/24 is 64

    C

    The route was redistributed on a router that has a router ospf 1 command configured

    D

    R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF


    正确答案： D
    解析： 暂无解析

相关内容