Refer to the exhibit. Which statement is co rrect regarding the router configuration shown? ()A. The router will rebroadcast any DHCP requests received by this interface out to all interfaces included in the ip helper - address commands.B. The router will

题目
Refer to the exhibit. Which statement is co rrect regarding the router configuration shown? ()

A. The router will rebroadcast any DHCP requests received by this interface out to all interfaces included in the ip helper - address commands.

B. The router will rebroadcast any UDP broadcasts received by this interface out to all interfaces included in the ip helper - address commands.

C. The router will unicast any DHCP requests received by this interface out to all addresses included in the ip helper - address commands.

D. This configuration will not do anything because the ip helper - address command needs to also be applied to the 192.168.23.1 IP address.

相似考题

1.Refer to the exhibit. Which two statements are true about the partial configuration that is shown? ()A. The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address 10.10.0.1.B. DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2.C. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP a ddress 10.0.0.1D. The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address 10.0.0.6.E. Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router.

2.Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.

3.Refer to the exhibit. Which statement about dynamic routing protocols for this network is true? ()A.No dynamic interior routing protocol can summarize as shownB.Unless configured otherwise, EIGRP would automatically summa rize the prefixes as shown in the exhibitC.With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at the specified summarization pointsD.The IP address design lends itself to OSPF Each summarizing router would be an ABR, summarizing to the next area in the address hierarchy

4.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

更多“Refer to the exhibit. Which statement is co rrect regarding the router configuration shown? () ”相关问题

  • 第1题：

    Refer to the exhibit. The partial configuration for an OSPF ASBR and an Area 0 ABR is shown. Assume the OSPF configurations throughout the network are operable. Which statement about these configurations is true? （）

    A. The ASBR route - maps are basically useless, because there are no deny prefix - lists.

    B. LSA Type 5s wil l not be received by the ABR from the ASBR.

    C. The OSPF backbone will not learn any RFC 1918 addresses.

    D. The matched prefix - list addresses will be given a metric of 255, which is essentially unreachable.


    参考答案：C

  • 第2题：

    Refer to the exhibit. R1 accesses the Internet using E0/0. You have been asked to co nfigure R1 so that a default route is generated to its downstream devices (191.0.0.1 and 192.0.0.1). Which commands would create this configuration? （）

    A.router eigrp 190redistribute static ! ip route 0.0.0.0 0.0.0.0 Null0

    B.ip default - network 2 0.0.0.0

    C.router eigrp 190 redistribute static ! ip route 0.0.0.0 255.255.255.255 Null0

    D.ip default - network 20.20.20.0


    参考答案：A

  • 第3题：

    Refer to the exhibit. Looking at the topology diagram and the partial router configurations shown, which statement is true? ()

    A.The NProuter has two OSPF neighbors in the "Full" adjacency state

    B.The NProuter serial0/0 interface has the OSPF dead timer set to 10 seconds

    C.The NProuter serial0/0 interface has been configured with an OSPF network type of "pointtopoint"

    D.The 10.1.1.1 and 10.1.1.2 routers are not using the default OSPF dead and hello timers setting

    E.The "Mismatched" error is caus ed by the expiration of the OSPF timers


    参考答案：E

  • 第4题：

    Refer to the exhibit. Which statement is true about the router configuration that is shown ?Select the best response.()

    A. Additional DHCP options will be imported from another DHCP server.

    B. The DHCP server pools need to be bound to an interface to operate.

    C. This configuration will provide IP configuration information to two different su bnets.

    D. Additional DCHP option information needs to be imported from another DHCP server.

    E. If the router hands out all the addresses in pool 1, then it will supply addresses from pool 2.


    参考答案：C

  • 第5题：

    Refer to the exhibit. Which statement is true? ()

    A. Only traffic with a destination from 10.10.0.0/19 will be permitted.

    B. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.

    C. Only traffic going to 10.10.0.0/19 will be permitted.

    D. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.


    参考答案：B

  • 第6题：

    Refer to the exhibit. Which st atement is true?()

    A. Router RTA is the BDR

    B. Router RTA is directly connected to interface 192.168.45.1

    C. Neighbor 192.168.45.1 has changed its OSPF priority number

    D. Router RTA and neighbor 192.168.45.2 are exchanging OSPF LSAs


    参考答案：A

  • 第7题：

    Refer to the exhibit. EIGRP is configured with the default configuration on all routers. Auto summariz ation is enabled on routers R2 and R3, but it is disabled on router R1.Which two EIGRP routes will be seen in the routing table of router R3?（）

    A. 10.0.0.0/8

    B. 172.16.10.0/24

    C. 172.16.0.0/24

    D. 10.10.10.0/24

    E. 172.16.0.0/16

    F. 10.10.0.0/16


    参考答案：D, E

  • 第8题：

    Refer to the exhibit. What can be determined about the router from the console output?()

    A.No configuration file was found in NVRAM.

    B.No configuration file was found in flash.

    C.No configuration file was found in the PCMCIA card.

    D.Configuration file is normal and will load in 15 seconds.


    参考答案：B

  • 第9题：

    Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）

    • A、The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2
    • B、The configuration is invalid because the DHCP options are global configuration commands
    • C、The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces
    • D、The router will choose which pool to use based upon the interface the DHCP request wasreceived on

    正确答案:D

  • 第10题：

    单选题
    Refer to the exhibit. Available public Internet sites are sometimes used for estimating performance. Which statement regarding their use for estimating VPN performance is correct?（）
    A

    Throughput results are valid as a value from the Teleworker's home to the corporate site, regardless of the location of the public test server. 

    B

    Throughput results may not be valid due to the public server's location on the Internet and fluctuations based on the use of the public server. 

    C

    Throughput values are not affected by the choice of split tunneling or Internet access through the VPN. 

    D

    Throughput results are unrelated to the Teleworker PC configuration or current PC use.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）
    A

    The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2

    B

    The configuration is invalid because the DHCP options are global configuration commands

    C

    The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces

    D

    The router will choose which pool to use based upon the interface the DHCP request wasreceived on


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Refer to the exhibit. A network administrator configures a new router and enters the copy startup-config running-config on the router. The network administrator powers down the router and sets it up at a remote location. When the router starts, it enter the system configuration dialog as shown. What is the caust of the problem?（）
    A

    The network administrator faled to save the configuration.

    B

    The configuration register is set to 0x2100.

    C

    The boot system flash command is missing from the configuration.

    D

    The configuraiton register is set to 0x2102.

    E

    The router is configured with the boot system startup command.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. A partial routing configuration is shown. Complete the configuration so that only the default - network is redistributed from EIGRP 190 into EIGRP 212. Which ACL statement completes the configuration correctly? （）

    A. access - list 100 permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0 .0

    B. access - list 100 permit ip host 0.0.0.0 any

    C. access - list 100 permit ip any host 0.0.0.0

    D. A default -network cannot be redistributed between routing processes.


    参考答案：C

  • 第14题：

    Refer to the exhibit. A network administrator wants to reduce the number of OSPF routes advertised from Area 1 into Area 2. As the router configuration specialist, what two things would you do to accomplish this goal?（）

    A. Enter the configuration on router B1.

    B. Enter the configuration on router B4.

    C. On the same router, enter the Summary - address 10.10.1.0 255.255.255.128 subcommand.

    D. On the same router, enter the Area 1 range 10.10.1.0 255.255.255.128 subcommand.

    E. On the same ro uter, enter the Area 2 range 10.10.1.0 255.255.255.128 subcommand.


    参考答案：A, D

  • 第15题：

    Refer to the exhibit. Routing updates for the 192.168.1.0 network are being received from all three neighbors. Which statement is correct regarding the result of the con figuration shown? ()

    A. The router will prefer the next hop of 172.16.1.1 for packets destined for the 192.168.1.0 network.

    B. The router will prefer the next hop of 172.26.1.1 for packets destined for the 192.168.1.0 network.

    C. The router will adve rtise the 192.168.1.0 network only to 172.30.1.1.

    D. The router will advertise the 192.168.1.0 network only to 172.26.1.1.

    E. The router will prefer the next hop of 172.26.1.1 for packets except those destined for the 192.168.1.0 network.


    参考答案：B

  • 第16题：

    Refer to the exhibit. Which statement is true about the configuration?()

    A. Hosts belonging to DHCP pool 1 and pool 2 will retain their IP settings for 30 hours before they must renew.

    B. Hosts will receive IP settings from pool 1 until the addresses run out, and then hosts will receive the settings from pool 2.

    C. Hosts in the 10.10.20.0/24 subnet will u se 10.10.20.50 as its DNS server.

    D. DHCP pool 0 needs to have the ip dhcp excluded - address command to exclude the default router and DNS servers.


    参考答案：C

  • 第17题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第18题：

    Refer to the exhibit. Which statement is true about the configuration? ()

    A. RTA will not establish an OSPF adjacency w ith RTB

    B. RTA will send OSPF hello packets, but will not send OSPF updates

    C. RTA will not accept OSPF hello packets from RTB

    D. RTA will send OSPF updates, but will not establish an adjacency with RTB


    参考答案：A

  • 第19题：

    Refer to the exhibit. A network associate has configured OSPF with the command:City(config-router) network 192.168.12.64 0.0.0.63 area 0After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? （）

    A.FastEthernet0 /0

    B.FastEthernet0 /1

    C.Serial0/0

    D.Serial0/1.102

    E.Serial0/1.103

    F.Serial0/1.104


    参考答案：B, C, D

  • 第20题：

    Refer to the exhibit. Which statement is correct based on the show login command output shown？（）

    • A、When the router goes into quiet mode， any host is permitted to access the router via Telnet，SSH， and HTTP，since the quiet-mode access list has not been configured.
    • B、The login block-for command is configured to block login hosts for 93 seconds.
    • C、All logins from any sources are blocked for another 193 seconds.
    • D、Three or more login requests have failed within the last 100 seconds.

    正确答案:D

  • 第21题：

    单选题
    Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?（）
    A

    data link layer

    B

    application layer

    C

    access layer

    D

    session layer

    E

    network layer


    正确答案： E
    解析： 暂无解析

  • 第22题：

    单选题
    Refer to the exhibit. Which statement is correct based on the show login command output shown？（）
    A

    When the router goes into quiet mode， any host is permitted to access the router via Telnet，SSH， and HTTP，since the quiet-mode access list has not been configured.

    B

    The login block-for command is configured to block login hosts for 93 seconds.

    C

    All logins from any sources are blocked for another 193 seconds.

    D

    Three or more login requests have failed within the last 100 seconds.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Refer to the exhibit. Given the DHCP pool configuration shown on Router A, the Cisco IP phone will not boot up in the Teleworker location. What is missing from the Teleworker DHCP pool configuration?（）
    A

    The DHCP pool needs to have an import all statement. 

    B

    The DHCP pool is missing an option 150 ip 10.59.138.1 statement.

    C

    The DHCP pool is missing an option 139 ip 10.59.138.1 statement

    D

    The DHCP pool is missing a dns-server 10.59.138.1 statement.


    正确答案： A
    解析： 暂无解析

相关内容