Which of the following layers is associated with the physical hardware address of a network node?()A.Layer 1B.Layer 2C.Layer 6D.Layer 7

题目
Which of the following layers is associated with the physical hardware address of a network node?()

A.Layer 1

B.Layer 2

C.Layer 6

D.Layer 7

相似考题

1.在路由器上建立一个名为test的DHCP地址池，并为其分配IP地址202.112.7.0、24，子网地址中的202.112.7.2～202.112.7.10作为静态地址分配，正确的DHCP配置是A．Router(config)#ip dhcp pool test Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(dhcp-config)#network 202.112.7.0 255.255.255.0B．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0/24C．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0 0.0.0.255D．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0 255.255.255.0

2.配置DHCP服务器IP地址池的地址为193.45.98.0/24。其中193.45.98.10至193.45.98.30用做静态地址分配，正确的配置语句是______。A．ip dhcp excluded-address 193.45.98.10，193.45.98.30 network193.45.98.0 255.255.255.0B．ip dhcp excluded-address 193.45.98.10，193.45.98.30 network 193.45.98.0/24C．ip dhcp excluded-address 193.45.98.10，193.45.98.30 network 193.45.98.0 0.0.0.255D．ip dhcp excluded-address 193.45.98.10，193.45.98.30 network 193.45.98.0 255.255.255.0

3.The X.25 standard specifies three layers of functionality.Which layers of the OSI model correspond to the X.25 layers?A．the Physical, Network, and Session LayersB．the Physical, Data Link, and Network LayersC．the Physical, Data Link, and Transport LayersD．the Physical, Session, and Presentation layers

4.（ 23 ） 配置 DHCP 服务器 IP 地址池的地址为 193.45.98.0/24 。 其中 193.45.98.10 至 193.45.98.30 用作静态地址分配，正确的配置语句是A ） ip dhcp excluded-address 193.45.98.10,193.45.98.30network 193.45.98.0 255.255.255.0B ） ip dhcp excluded-address 193.45.98.10,193.45.98.30network 193.45.98.0/24C ） ip dhcp excluded-address 193.45.98.10,193.45.98.30network 193.45.98.0 0.0.0.255D ） ip dhcp excluded-address 193.45.98.10 193.45.98.30network 193.45.98.0 255.255.255.0

参考答案和解析
参考答案：B
更多“Which of the following layers is associated with the physical hardware address of a network node?() ”相关问题

  • 第1题：

    OSI参考模型有哪些层，按顺序()。

    A.Application、session、transport、network、physical、physical、datalink

    B.Application、presentation、session、network、transport、datalink,physical

    C.Application、presentation、session、transport、network、datalink、physical

    D.Application、session、transport、physical、network、physical、datalink


    正确答案：C

  • 第2题：

    配置DHCP服务器IP地址池的地址为193.45.98.0/24，其中193.45.98.10～193.45.98.30用做静态地址分配，正确的配置语句是______。

    A．ip dhcp excluded-address 193.45.98.10.193.45.98.30 network 193.45.98.0 255.255.255.0

    B．ip dhcp excluded-address 193.45.98.10.193.45.98.30 network 193.45.98.0/24

    C．ip dhcp excluded-address 193.45.98.10 193.45.98.30 network 193.45.98.0 0.0.0.255

    D．ip dhcp excluded-address 193.45.98.10 193.45.98.30 network 193.45.98.0 255.255.255.0


    正确答案：D
    解析：本试题中，地址块“193.45.98.0/24”的“/24”是子网掩码255.255.255.0的简化表达形式。在DHCP Pool配置模式下，使用命令networknetwork-number＞[mask|/prefix-length]配置分配给DHCP客户的有效IP地址池的子网地址和子网掩码。其中，子网掩码参数允许以点分十进制数、掩码前缀长度两种形式表达。因此，DHCP服务器IP地址池的地址为193.45.98.0/24的配置语句，如下所示：
      Router (dhcp-config)# network l93.45.98.0 255.255.255.0
      或：
      Router (dhcp-eonfig)# network 193.45.98.0/24
      在全局配置模式“Router(config)#”下，使用命令ip dhcp excluded-address low-address [high-address]将所要保留的IP地址从预定义的IP地址池中排除，使之成为不能动态分配的IP地址。若将IP地址池中 193.45.98.10～193.45.98.30用做静态地址分配，则相关的配置语句如下：
      Router (confiq)#ip dhcp excluded-address 193.45.98.10 193.45.98.30
      本试题选项A、选项B、选项C的配置语句，分别存在不符合以上两条命令的语法格式。

  • 第3题：

    使用哪组命令可将路由器配置为 DHCP 路由器，从而将 IPv4 地址分配给 192.168.100.0/23 LAN，同时为静态分配保留前 10 个和最后一个地址？

    A.ip dhcp excluded-address 192.168.100.1 192.168.100.10 ip dhcp excluded-address 192.168.100.254 ip dhcp pool LAN-POOL-100 network 192.168.100.0 255.255.255.0 ip default-gateway 192.168.100.1#B.ip dhcp excluded-address 192.168.100.1 192.168.100.10 ip dhcp excluded-address 192.168.101.254 ip dhcp pool LAN-POOL-100 network 192.168.100.0 255.255.254.0 default-router 192.168.100.1#C.dhcp pool LAN-POOL-100 ip dhcp excluded-address 192.
    C

  • 第4题：

    TheBGProutingtableconsistsofthefollowingnetworkroutes：Whatisthecorrectcommandtosummarizetheseprefixesintoasinglesummaryprefixof192.168.12.0/22whilealsoallowingfortheadvertisementofthemorespecificprefixes？（）

    A.network192.168.12.0mask255.255.252.0

    B.network192.168.12.0mask0.0.3.255

    C.network192.168.12.0

    D.aggregate-address192.168.12.0255.255.252.0

    E.aggregate-address192.168.12.0255.255.252.0summary-only

    F.aggregate-address192.168.12.0255.255.252.0as-set


    参考答案：D

  • 第5题：

    配置DHCP服务器IP地址池的地址为193.45.98.0/24，其中193.45.98.10至193.45.98.30用作静态地址分配，正确的配置语句是

    A.ip dhcp excluded-address 193.45.98.10,193.45.98.30 network 193.45.98.0 255.255.255.0

    B.ip dhcp excluded-address 193.45.98.10,193.45.98.30 network 193.45.98.0 /24

    C.ip dhcp excluded-address 193.45.98.10 193.45.98.30 network 193.45.98.0 0.0.0.255

    D.ip dhcp excluded-address 193.45.98.10 193.45.98.30 network 193.45.98.0 255.255.255.0


    正确答案：D
    P187

  • 第6题：

    使用哪组命令可将路由器配置为 DHCP 路由器，从而将 IPv4 地址分配给 192.168.100.0/23 LAN，同时为静态分配保留前 10 个和最后一个地址？

    A.dhcp pool LAN-POOL-100 ipdhcp excluded-address 192.168.100.1 192.168.100.9 ipdhcp excluded-address 192.168.100.254 network 192.168.100.0 255.255.254.0 default-router 192.168.101.1#B.ipdhcp excluded-address 192.168.100.1 192.168.100.10 ipdhcp excluded-address 192.168.100.254 ipdhcp pool LAN-POOL-100 network 192.168.100.0 255.255.254.0 default-router 192.168.100.1#C.ipdhcp excluded-address 192.168.100.1 192.168.100.10 ipdhcp exclu
    A. ip route-static

相关内容