An administrator replaced a router with a switch. End users are able to access network shares butare not able to access the Internet. Which of the following is the BEST explanation why the usersare unable to access the Internet?（）A. Router routes traffic

题目

An administrator replaced a router with a switch. End users are able to access network shares butare not able to access the Internet. Which of the following is the BEST explanation why the usersare unable to access the Internet?（）

A. Router routes traffic between different networks and a switch does not

B. The new switch is faulty and needs to be replaced and configured correctly

C. The firewall needs to be setup to allow traffic to reach the Internet

D. The switch needs to be setup to forward data traffic to the Internet

相似考题

1.在Cisco路由器上配置RIPv1路由协议，参与RIP路由的网络地址有193.22.56.0/26、193.22.56.64/26、193.22.56.128/26和193.22.56.192/26，正确的配置命令是______。A) Router(config)#network 193.22.56.0 0.0.0.255B) Router(config-router)#network 193.22.56.0 255.255.255.0C) Router(config)#network 193.22.56.0D) Router(config-router)#network 193.22.56.0A．B．C．D．

2.Which of the following OSPF commands, when used together, will put the network 192.168.10.0／24 into OSPF area 0?()A. Router(config-router)# network 192.168.10.0 0.0.0.255 0B. Router(config-router)# network 192.168.10.0 0.0.0.255 area 0C. Router(config-router)# network 192.168.10.0 255.255.255.0 area 0D. Router(config)# router ospf 0E. Router(config)# router ospf 1

3.RouterR1needstobeconfiguredtoadvertiseaspecificnetwork.Whichofthefollowingcommandswouldyouuseifyouwantedtoadvertisethesubnet154.2.1.0255.255.255.0tothe EBGPneighborsonyoursubnet?()A.Router（config-router）#network154.2.1.0B.outer（config-router）#network164.2.1.0C.Router（config-router）#network-advertise154.2.1.0D.Router（config-router）#network154.2.1.0mask255.255.255.0E.Noneoftheotheralternativesapply

4.下面哪条命令是正确的，如果要将192.168.1.0/24的业务网段发到OSPF的area0（)A.Router(config-router)network 192.168.1.0 0.0.0.2550B.Router(config-router)network 192.168.1.0 0.0.0.255 area0C.Router(config-router)network 192.168.1.0 255.255.255.255 area0D.Router(config-router)network 192.168.1.0 0.0.0.0 area0

更多“An administrator replaced a router with a switch. End users are able to access network sha ”相关问题

  • 第1题：

    Which commands are required to properly configure a router to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?()

    A. Router(config)#router ospf 1

    B. Router(config)#router ospf 0

    C. Router(config)#router ospf area 0

    D. Router(config-router)#network 192.168.16.0 0.0.0.255 area 0

    E. Router(config-router)#network 192.168.16.0 0.0.0.255 0

    F. Router(config-router)#network 192.168.16.0 255.255.255.0 area 0


    参考答案：A, D

  • 第2题：

    WhichcommandsarerequiredtoproperlyconfigurearoutertoproperlyconfigurearoutertorunOSPFandtoaddnetwork192.168.16.0／24toOSPFarea0?()

    A.Router（config）#routerospf1

    B.Router（config）#routerospf0

    C.Router（config）#routerospfarea0

    D.Router（config-router）#network192.168.16.00.0.0.255area0

    E.Router（config-router）#network192.168.16.00.0.0.2550

    F.Router（config-router）#network192.168.16.0255.255.255.0area0


    参考答案：A, D

  • 第3题：

    【单选题】要在路由器 B 上为所有相连网络启用 RIP，正确的命令是怎样的？

    A．RouterB# router rip RouterB(router)# network 210.36.7.0 RouterB(router)# network 220.17.29.0 RouterB(router)# network 211.168.74.0

    B．RouterB(config)# router rip RouterB(config-router)# network 198.16.4.0 RouterB(config-router)# network 211.168.74.0 RouterB(config-router)# network 199.84.32.0

    C．RouterB(config)# configure router rip RouterB(config-router)# network 210.36.7.0 RouterB(config-router)# network 199.84.32.0 RouterB(conf


    C

  • 第4题：

    Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0／24 to OSPF area 0?()

    A.Router(config)#router ospf 1

    B.Router(config)#router ospf 0

    C.Router(config)#router ospf area 0

    D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0

    E.Router(config-router)#network 192.168.16.0 0.0.0.255 0

    F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0


    参考答案：A, D

  • 第5题：

    【单选题】下面哪条命令是正确的，如果要将192.168.1.0/24的业务网段发到OSPF的area 0（)

    A．Router(config-router)# network 192.168.1.0 0.0.0.255 0

    B．Router(config-router)# network 192.168.1.0 0.0.0.255 area 0

    C．Router(config-router)# network 192.168.1.0 255.255.255.255 area 0

    D．Router(config-router)# network 192.168.1.0 0.0.0.0 area 0


    Switch#no vlan 10

  • 第6题：

    5、要在命令行下使用adb shell命令，应将（）目录添加到系统Path环境变量中？

    A．C:\Users\Administrator\AppData\Local\Android\Sdk\bin

    B．C:\Users\Administrator\AppData\Local\Android\Sdk\platforms

    C．\Users\Administrator\AppData\Local\Android\Sdk\build-tools

    D．C:\Users\Administrator\AppData\Local\Android\Sdk\platform-tools


    bash

相关内容