Which command would display OSPF parameters such as filters,default metric,maximum paths,and number of areas configured on a outer()A.show ip protocolB.show ip routeC.show ipospfinterfaceD.show ipospfE.show ipnterfaceF.None of the other alternatives apply

题目
Which command would display OSPF parameters such as filters,default metric,maximum paths,and number of areas configured on a outer()

A.show ip protocol

B.show ip route

C.show ipospfinterface

D.show ipospf

E.show ipnterface

F.None of the other alternatives apply

相似考题

1.During the redistribution process configured on RTA, some of the EIGRP routes, such as 10.1.1.0/24 and 10.2.2.0/24,are not being redistributed into the OSPF routing domain. Which two items could be a solution to this proble m?（）A. Change the EIGRP AS number from 100 to1 in the redistribute command.B. Add the subnets option to the redistribute command.C. Change the metric - type to2 in the redistribute command.D. Configure the redistribute command under router eigrp 1 i nstead.E. Change the metric to an EIGRP compatible metric value (bandwidth, delay, reliability, load, MTUs) in the redistribute command.

2.The maximum number of routers per OSPF area typically depends on which three factors?()A. the kind of OSPF areas being implementedB. the number of external LSAs in the networkC. the number of DRs and BDRs in the areasD. the number of virtual links in the areasE. how well the areas can be summarizedF. the use of LSA filters

3.Which of the following are characteristics of OSPF areas?()A. Hierarchical OSPF networks need to be in one areaB. Multiple OSPF areas must connect to area 0C. Single area OSPF networks must be configured in area 1D. Areas can be assigned any number from 0 to 63535E. Area 0 is called the backbone areaF. Each OSPF area need to be configured with a loopback interface

4.Refer to the exhibit. A company would prefer all Internet - bound OSPF routed traffic to use ISP ABC with ISP DEF as a backup. As the network consultant, what three configuration changes might you make?（）A. The default -information originate command should be configured on router B1 and B4.B. The default -information originate command should be configured on router B2 and B3.C. If the metric value for ISP ABC is set at the default, the I SP DEF metric value should be set to 1.D. If the metric value for ISP ABC is set at the default, the ISP DEF metric value should be set to 25.E. The metric type value should be set to type 1.F. The metric type value should be set to type 2.

更多“Which command would display OSPF parameters such as filters,default metric,maximum paths,and number of areas configured on a outer() ”相关问题

  • 第1题：

    What is the default maximum number of equal－cost paths that can be placed into the routing of a cisco OSPF router?()

    A. 16

    B. 2

    C. unlimited

    D. 4


    参考答案：D

  • 第2题：

    Which of the following is a valid method for defining a seed metric？（Choose all that apply.）（）

    • A、The default-metric command configured under the appropriate interface
    • B、The metric parameter in the network command of a routing process
    • C、The metric parameter in the redistribute command
    • D、The default-metric command
    • E、A route-map containing a seed command
    • F、A route map containing a metric command

    正确答案:C,D,F

  • 第3题：

    Which command would display OSPF parameters such as filters，default metric，maximum paths，and number of areas configured on a outer（）

    • A、show ip protocol
    • B、show ip route
    • C、show ip ospfinterface
    • D、show ip ospf
    • E、show ip nterface
    • F、None of the other alternatives apply

    正确答案:A

  • 第4题：

    Which three statements are true about EIGRP route summarization?（）

    • A、When manual summarization is configured, the router immediately creates a route that points to null0 interface
    • B、Manual route summarization  is configured in router configuration mode when the router is configured for EIGRP routing
    • C、Manual route summarization is configured on the interface
    • D、The ip summary - address eigrp command generates a default route with an administrative distance  of 5
    • E、When manual summarization is configured, the summary route will use the metric of the largest specific metric of the summary routes
    • F、The ip summary - address eigrp command generates a default route with an administrative distance of 90

    正确答案:A,C,D

  • 第5题：

    The maximum number of routers per OSPF area typically depends on which three factors?（）

    • A、the kind of OSPF areas being implemented
    • B、the number of external LSAs in the network
    • C、the number of DRs and BDRs in the areas
    • D、the number of virtual links in the areas
    • E、how well the areas can be summarized
    • F、the use of LSA filters

    正确答案:A,B,E

  • 第6题：

    Routers A and B have an OC12c and a GE link between them and are running OSPF over both of these links.Which item is correct， assuming the default JUNOS software OSPF metric calculation？（）

    • A、There are two equal cost paths between A and B
    • B、The GE link is the preferred path between A and B
    • C、The OC12c link is the preferred path between A and B
    • D、Manual metric assignment must be configured to determine the outcome.

    正确答案:A

  • 第7题：

    多选题
    Process EIGRP 1 is redistributing routes from process OSPF 2. Which two of the following methods may be used to set the metrics of the redistributed routes?（）
    A

    Let the metrics default.

    B

    Set the metric components using the redistri bute command's metric keyword.

    C

    Set the metric components using the default - metric router subcommand.

    D

    Set the integer (composite) metric using the redistribute command's metric keyword.


    正确答案： D,A
    解析： 暂无解析

  • 第8题：

    单选题
    Which command would display OSPF parameters such as filters，default metric，maximum paths，and number of areas configured on a outer（）
    A

    show ip protocol

    B

    show ip route

    C

    show ip ospfinterface

    D

    show ip ospf

    E

    show ip nterface

    F

    None of the other alternatives apply


    正确答案： B
    解析： 暂无解析

  • 第9题：

    多选题
    Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.（）
    A

    All OSPF networks require the use of multiple areas

    B

    Multiple OSPF areas must connect to area 0

    C

    Single area OSPF networks must be configured in area 1

    D

    Areas can be assigned any number from 0 to 63535

    E

    Area 0 is called the backbone area

    F

    Each OSPF area need to be configured with a loopback interface


    正确答案： D,B
    解析： 暂无解析

  • 第10题：

    多选题
    The maximum number of routers per OSPF area typically depends on which three factors?（）
    A

    the kind of OSPF areas being implemented

    B

    the number of external LSAs in the network

    C

    the number of DRs and BDRs in the areas

    D

    the number of virtual links in the areas

    E

    how well the areas can be summarized

    F

    the use of LSA filters


    正确答案： D,E
    解析： 暂无解析

  • 第11题：

    单选题
    Which one of the following parameters is the very first thing that needs to be configured as part of the IGRP routing process?（）
    A

    The wild card mask

    B

    The IP address

    C

    The IP address mask

    D

    The metric weights

    E

    The Autonomous System number


    正确答案： E
    解析： 暂无解析

  • 第12题：

    多选题
    Which of the following is a valid method for defining a seed metric？（Choose all that apply.）（）
    A

    The default-metric command configured under the appropriate interface

    B

    The metric parameter in the network command of a routing process

    C

    The metric parameter in the redistribute command

    D

    The default-metric command

    E

    A route-map containing a seed command

    F

    A route map containing a metric command


    正确答案： F,E
    解析： 暂无解析

  • 第13题：

    Which one of the following parameters is the very first thing that needs to be configured as part of the IGRP routing process?（）

    • A、The wild card mask
    • B、The IP address
    • C、The IP address mask
    • D、The metric weights
    • E、The Autonomous System number

    正确答案:E

  • 第14题：

    Which of the following are true statements regarding the characteristics of OSPF areas? Select all that apply.（）

    • A、All OSPF networks require the use of multiple areas
    • B、Multiple OSPF areas must connect to area 0
    • C、Single area OSPF networks must be configured in area 1
    • D、Areas can be assigned any number from 0 to 63535
    • E、Area 0 is called the backbone area
    • F、Each OSPF area need to be configured with a loopback interface

    正确答案:B,E

  • 第15题：

    Which of the following are characteristics of OSPF areas?（）

    • A、Hierarchical OSPF networks need to be in one area
    • B、Multiple OSPF areas must connect to area 0
    • C、Single area OSPF networks must be configured in area 1
    • D、Areas can be assigned any number from 0 to 63535
    • E、Area 0 is called the backbone area
    • F、Each OSPF area need to be configured with a loopback interface

    正确答案:B,E

  • 第16题：

    What is the default maximum number of equal-cost paths that can be placed into the routing of a cisco OSPF router?（）

    • A、16
    • B、2
    • C、unlimited
    • D、4

    正确答案:D

  • 第17题：

    Which command would display OSPF parameters such as filters， default metric， maximum paths，and number of areas configured on a router？（）

    • A、show ip protocol
    • B、show ip route
    • C、show ip ospf interface
    • D、show ip ospf
    • E、show ip interface
    • F、None of the other alternatives apply

    正确答案:A

  • 第18题：

    Routers A and B have an OC12c and a GE link between them and are running OSPF over both ofthese links. Which statement is correct, assuming the default JUNOS software OSPF metric calculation?（）

    • A、There are two equal cost paths between a and b.
    • B、The ge link is the preferred path between a and b.
    • C、The oc12c link is the preferred path between a and b.
    • D、Manual metric assignment must be configured to determine the outcome

    正确答案:A

  • 第19题：

    单选题
    Routers A and B have an OC12c and a GE link between them and are running OSPF over both ofthese links. Which statement is correct, assuming the default JUNOS software OSPF metric calculation?（）
    A

    There are two equal cost paths between a and b.

    B

    The ge link is the preferred path between a and b.

    C

    The oc12c link is the preferred path between a and b.

    D

    Manual metric assignment must be configured to determine the outcome


    正确答案： A
    解析： 暂无解析

  • 第20题：

    多选题
    Which of the following are characteristics of OSPF areas?（）
    A

    Hierarchical OSPF networks need to be in one area

    B

    Multiple OSPF areas must connect to area 0

    C

    Single area OSPF networks must be configured in area 1

    D

    Areas can be assigned any number from 0 to 63535

    E

    Area 0 is called the backbone area

    F

    Each OSPF area need to be configured with a loopback interface


    正确答案： C,F
    解析： 暂无解析

  • 第21题：

    单选题
    Which command would display OSPF parameters such as filters， default metric， maximum paths，and number of areas configured on a router？（）
    A

    show ip protocol

    B

    show ip route

    C

    show ip ospf interface

    D

    show ip ospf

    E

    show ip interface

    F

    None of the other alternatives apply


    正确答案： E
    解析： 暂无解析

  • 第22题：

    单选题
    What is the default maximum number of equal-cost paths that can be placed into the routing of a cisco OSPF router?（）
    A

    16

    B

    2

    C

    unlimited

    D

    4


    正确答案： C
    解析： 暂无解析

  • 第23题：

    多选题
    Process OSPF 1 is redistributing routes from process OSPF 2. Which of the following methods may be used to set the metrics of the redistributed routes?（）
    A

    Let the metrics default.

    B

    Use each redistributed route's OSPF metric using the redistribute command's metric transparent keywords.

    C

    Set the metric using the default - metric router subcommand.

    D

    Redistribution is not allowed between two OSPF p rocesses.


    正确答案： C,D
    解析： 暂无解析

相关内容