You install a wireless router and disable the Service Set identifier (SSID) broadcast feature. You need to configure your computer to connect to the wireless network.What should you do?()A.AB.BC.CD.D

第1题：

第2题：

You are designing the wireless networks for the three warehouses. Your design must support the inventory and shipping management solution， and it must meet security requirements. What should you do？（）

• A、Ensure that all wireless networking equipment fully supports the IEE 802.11a， IEEE 802.11b， and IEEE 802.11g wireless networking protocols
• B、Assign a random service set identifier （SSID） to each wireless access point. Disable broadcasting of SSIDs on all wireless access points
• C、Create a firewall to block traffic to any IP address that did not originate from the company’s DHCP servers. Ensure that all wireless access points connect behind this new firewall
• D、Configure a server to use Internet Authentication Service （IAS）. Configure the wireless networking equipment to use the IEEE 802.1x protocol and the IAS server

第3题：

Your computer has a wireless network adapter installed. However， the computer fails to connect to the wireless network.  You need to ensure that the computer is able to connect to the wireless network.  What should you do？（）

• A、Change the Network Category setting of the wireless connection to Public.
• B、Enable the Internet Connection Sharing feature on the wireless network adapter.
• C、Rename the wireless network adapter to match the Service Set Identifier （SSID） of the wireless network.
• D、Configure the wireless network adapter to connect to the appropriate wireless network from the Connect to a network list.

第4题：

You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window.  You need to view this connection in the Connect to a network window.  What should you do？（）

• A、Click the Diagnose and repair link.
• B、Enable the Turn on notification of new networks option.
• C、Configure the Connect to a network window to show all networks.
• D、Disable the Connect automatically when this network is in range option， and then enable the Connect even if the network is not broadcasting option.

第5题：

Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only when traveling.  You need to configure the network adapter profile settings to ensure that other systems are allowed to discover your computer only when you are at home.  What are two possible ways to achieve this goal？（）

• A、When you configure access to the wired network at home， set the wired network adapter location type to Private.
• B、When you configure access to the wired network at home， set the wired network adapter location type to Public.
• C、When you configure access to the public wireless access points， set the wireless network adapter location type to Private.
• D、When you configure access to the public wireless access points， set the wireless network adapter location type to Public.

第6题：

You share your computer with a co-worker by using separate user accounts to log on. Your co-worker modifies the wireless network properties. When you use the computer， the change in properties is not reflected.  You need to ensure that you can view all the changes made to the wireless network properties.   What should you do？（）

• A、Disable the Connect even if the network is not broadcasting option.
• B、In the Network and Sharing Center window， click the Diagnose and repair option.
• C、Set the default wireless profile type to the Use all-users only profile （recommended） option. Recreate the wireless network.
• D、Set the default wireless profile type to the Use all-users and per-user profiles option. Recreate the wireless network with the Save this network for me only option.

第7题：

Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.  Which two actions should you perform？（）

• A、Right-click and click the Diagnose option in the Connect to a network window.
• B、Set the security type value to No authentication in the wireless network properties dialog box.
• C、Click the Manually connect to a wireless network option in the Set up a connection or network window.
• D、In the Wireless Network properties dialog box， click the Connect even if the network is not broadcasting option.
• E、Configure the correct IP address， subnet mask， and default gateway for the target network in the wireless network connection properties dialog box.

第8题：

第9题：

第10题：

第11题：

第12题：

第13题：

Your network contains a wired network and a wireless network. Users report that they experience intermittent problems accessing network resources when they connect to the internal wireless network. You discover that an unsecured rogue wireless access point uses the same Service Set Identifier (SSID) as the internal wireless network. You need to ensure that the users only connect to the internal wireless network. What should you do?（）

• A、Configure a Windows Connect Now Group Policy.
• B、Configure a Wireless Network (IEEE 802.11) Policy.
• C、Delete the rogue network from the Network and Sharing Center on each computer.
• D、Create a Connection Manager Administration Kit (CMAK) profile and deploy it to all users.

第14题：

Your computer connects to both an ad hoc wireless network and a wired network. You need to allow other wireless clients to access the wired network.  What should you do？ （）

• A、Set the security type to the No authentication （Open） option.
• B、Configure the wired and wireless network adapters as a network bridge.
• C、Modify the wireless network profile type to the Use all-user profiles only （recommended） option.
• D、On each wireless client， set the Service Set Identifier （SSID） for a new wireless network to the name of your wired network adapter.

第15题：

You have a computer that runs Windows XP Professional. The computer has an 802. 11g wireless network card. You have a wireless access point that is secured by using WiFi Protected Access (WPA). The service set identifier (SSID) of the wireless access point does not broadcast. You need to establish a wireless connection to the wireless access point. What should you do?（） 

• A、From the Device Manager, open the wireless network adapter properties and click Advanced. 
• B、From the Device Manager, right-click the wireless network adapter and click Scan for hardware changes. 
• C、From the Wireless Network Connection Properties, select View Wireless Networks. 
• D、From the Wireless Network Connection Properties, click Change Advanced Settings. From the Wireless Networks tab, select Add a preferred network. 

第16题：

You share your portable computer with a co-worker. You use separate user accounts to log on. A wireless network is available to you and your co-worker.  You need to prevent your co-worker from modifying your wireless network profile.  What should you do？（）

• A、Disable the Connect even if the network is not broadcasting option.
• B、In the Network and Sharing Center window， click the Diagnose and repair option.
• C、Set the default wireless profile type to the Use all-users only profile （recommended） option. Recreate the wireless network.
• D、Set the default wireless profile type to the Use all-users and per-user profiles option. Recreate the wireless network by using the Save this network for me only option.

第17题：

You need to design an authentication solution for the wireless network. Your solution must meet the security requirements. What should you do？（）

• A、Create wireless VPNs using L2TP/IPSec between the client computers to the wireless access point
• B、Configure IEEE 802.1x authentication with smart cards
• C、Configure the wireless network to use Wired Equivalent Privacy （WEP）
• D、Install and configure an Internet Authentication Service （IAS） server

第18题：

You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.  You need to configure the wireless connection to allow your computer to discover other computers.  What should you do？（）

• A、Configure the network category of your wireless network connection to Private.
• B、Configure the network category of your wireless network connection to Public.
• C、Configure the TCP/IP packet filtering on the wireless network connection.
• D、Configure the wireless network connection with the appropriate authentication to the router.

第19题：

ertkiller .com has purchased laptop computers that will be used to connect to a wireless network. You create a laptop organizational unit and create a Group Policy Object （GPO） and configure user profiles by utilizing the names of approved wireless networks. You link the GPO to the laptop organizational unit. The new laptop users complain to you that they cannot connect to a wireless network.  What should you do to enforce the group policy wireless settings to the laptop computers（）

• A、Execute gpupdate/target：computer command at the command prompt on laptop computers
• B、Execute Add a network command and leave the SSID （service set identifier） blank
• C、Execute gpupdate/boot command at the command prompt on laptops computers
• D、Connect each laptop computer to a wired network and log off the laptop computer and then login again.
• E、None of the above

第20题：

第21题：

第22题：

第23题：