单选题What does the "allow performance information collection" button do in the Hardware Management Console （HMC） GUI？ （）AIt allows you to get inter partition reports， or cross partition performance activity.BIt will allow IBM remote technical support to get

题目
单选题
What does the "allow performance information collection" button do in the Hardware Management Console （HMC） GUI？ （）
A

 It allows you to get inter partition reports， or cross partition performance activity.

B

 It will allow IBM remote technical support to get performance information from the machine.

C

 It is effective only on POWER6 and when Live Partition Mobility operations are planned.

D

 It will start standard performance monitoring tools when an LPAR boots up， the output will be saved to the /etc/perf directory by default.

相似考题

1. Using the following information: Performance data from an existing system that a new system will replace; Performance estimates that anticipate future workloads; Micro-partitioning and logical partitioning implementations. Which of the following allows a technical sales representative to create a system design which can be imported into an HMC?（）A、IBMeConfigB、IBM Performance MonitorC、IBM Workload Estimator (WLE)D、IBM System Planning Tool (SPT)

2. A customer has a 32-core Power 770 with 4 AIX partitions and 2 IBM i partitions. They want to improve network availability and allow for concurrent maintenance. What will support the customer requirement at least cost?（）A、Build the logical partition infrastructure based on 6 or more VLANs.B、Build the logical partition infrastructure based on two or more IVEs.C、Build the logical partition infrastructure based on Partition Mobility.D、Build the logical partition infrastructure based on redundant VIO Servers.

3.Which of the following procedures will allow an operator to access an LPAR console session?（）A、Open a vterm from the VIO graphical interface to get the partition console.B、Open a vterm from the ASMI graphical interface to get the partition console.C、Start an ssh session to the HMC. Use the vtmenu command to select the desired LPAR.D、Start an ssh session to the VIO. Use the vtmenu command to select the desired LPAR.

4.In order for DLPAR operations to be possible, the RMC daemons on the Hardware Management Console (HMC) must communicate with the RMC daemons on all of the LPARs involved. How can the RMC daemons be restarted on the HMC, causing the least disruption?（）A、Run "/usr/sbin/rsct/bin/rmcctrl z" as hscroot. B、Reboot the HMC, either through the GUI or via the command line. C、Disable and re-enable RMC in the Firewall settings in the HMC GUI. D、Select the "Partition Communication" checkbox in the LAN Adapter dialogue box.

更多“单选题What does the "allow performance information collection" button do in the Hardware Management Console （HMC） GUI？ （）A  It allows you to get inter partition reports， or cross partition performance activity.B  It will allow IBM remote technical support to”相关问题

  • 第1题：

    What does the "allow performance information collection" button do in the Hardware Management Console （HMC） GUI？ （）

    • A、 It allows you to get inter partition reports， or cross partition performance activity.
    • B、 It will allow IBM remote technical support to get performance information from the machine.
    • C、 It is effective only on POWER6 and when Live Partition Mobility operations are planned.
    • D、 It will start standard performance monitoring tools when an LPAR boots up， the output will be saved to the /etc/perf directory by default.

    正确答案:A

  • 第2题：

    Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?（）

    • A、Cards can be added and then enabled via Hardware Management Console (HMC) GUI or command line. 
    • B、The HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed. 
    • C、If the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run. 
    • D、The Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot. 

    正确答案:B

  • 第3题：

    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）

    • A、In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
    • B、In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
    • C、In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
    • D、In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

    正确答案:C

  • 第4题：

    Which IOS command does an administrator use to report a cross partition global view of system performance?（）

    • A、cecstat -p itcert 
    • B、iosperf -C 
    • C、topas -cecdisp 
    • D、topas_nmon -cec 

    正确答案:C

  • 第5题：

    单选题
    In order for DLPAR operations to be possible, the RMC daemons on the Hardware Management Console (HMC) must communicate with the RMC daemons on all of the LPARs involved. How can the RMC daemons be restarted on the HMC, causing the least disruption?（）
    A

    Run /usr/sbin/rsct/bin/rmcctrl z as hscroot. 

    B

    Reboot the HMC, either through the GUI or via the command line. 

    C

    Disable and re-enable RMC in the Firewall settings in the HMC GUI. 

    D

    Select the Partition Communication checkbox in the LAN Adapter dialogue box.


    正确答案： B
    解析： 暂无解析

  • 第6题：

    单选题
    Which of the following procedures will allow an operator to access an LPAR console session?（）
    A

    Open a vterm from the VIO graphical interface to get the partition console.

    B

    Open a vterm from the ASMI graphical interface to get the partition console.

    C

    Start an ssh session to the HMC. Use the vtmenu command to select the desired LPAR.

    D

    Start an ssh session to the VIO. Use the vtmenu command to select the desired LPAR.


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    A customer is conducting a proof of concept with an IBM System Storage DS5100 attached toLinux hosts. The DS5100 is running in a degraded state and the "collect all support data"operation does not complete correctly. What alternate data should be collected and forwarded toIBM support？（）
    A

    Capture State information， Major Event Log （MEL）， I/Ometer

    B

    Storage Profile， Capture State information， Performance Monitor

    C

    Storage Profile， Major Event Log （MEL）， Capture State information

    D

    Capture State Information， Major Event Log （MEL）， Performance Monitor


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    What does the "allow performance information collection" button do in the Hardware Management Console （HMC） GUI？ （）
    A

     It allows you to get inter partition reports， or cross partition performance activity.

    B

     It will allow IBM remote technical support to get performance information from the machine.

    C

     It is effective only on POWER6 and when Live Partition Mobility operations are planned.

    D

     It will start standard performance monitoring tools when an LPAR boots up， the output will be saved to the /etc/perf directory by default.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    IBM remote support for hardware maintenance is required for several mission critical Power 595 servers. The data center is very security conscious and does not allow internet access. How should an administrator configure outbound connectivity of Electronic Service Agent？（）
    A

    VPN

    B

    Modem

    C

    Private LAN

    D

    Pass-through systems


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    Which IOS command does an administrator use to report a cross partition global view of system performance?（）
    A

    cecstat -p itcert 

    B

    iosperf -C 

    C

    topas -cecdisp 

    D

    topas_nmon -cec 


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Your SQL Server 2005 database contains a table that has 500 million rows of data. Some of the data is historical and some is current. You need to partition the data on a single server to increase performance and optimize maintenance. What should you do？（）
    A

    Implement horizontal partitioning.

    B

    Implement vertical partitioning.

    C

    Implement a raw partition.

    D

    Implement distributed partitioning.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）
    A

    In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.

    B

    In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.

    C

    In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.

    D

    In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    IBM remote support for hardware maintenance is required for several mission critical Power 595 servers. The data center is very security conscious and does not allow internet access.  How should an administrator configure outbound connectivity of Electronic Service Agent？（）  

    • A、VPN
    • B、Modem
    • C、Private LAN
    • D、Pass-through systems

    正确答案:B

  • 第14题：

    Which of the following interfaces is required to implement Workload Partition Mobility? （）

    • A、 Workload Partitions Manager for AIX
    • B、 Hardware Management Console （HMC） GUI
    • C、 Integrated Virtualization Manager （IVM）
    • D、 Advanced System Management Interface （ASMI）

    正确答案:A

  • 第15题：

    Which of the following is a feature of Integrated Virtualization Manager (IVM)? （）

    • A、 It has a GUI interface for upgrading system firmware. 
    • B、 It creates and manages AIX/Linux and VIOS type LPARs. 
    • C、 It can be managed by the Hardware Management Console (HMC). 
    • D、 It supports Live Partition Mobility on POWER6 systems and above.

    正确答案:D

  • 第16题：

    Your SQL Server 2005 database contains a table that has 500 million rows of data. Some of the data is historical and some is current. You need to partition the data on a single server to increase performance and optimize maintenance. What should you do？（）

    • A、Implement horizontal partitioning.
    • B、Implement vertical partitioning.
    • C、Implement a raw partition.
    • D、Implement distributed partitioning.

    正确答案:A

  • 第17题：

    单选题
    Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?（）
    A

    Cards can be added and then enabled via Hardware Management Console (HMC) GUI or command line. 

    B

    The HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed. 

    C

    If the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run. 

    D

    The Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot. 


    正确答案： C
    解析： 暂无解析

  • 第18题：

    单选题
    A customer has a 32-core Power 770 with 4 AIX partitions and 2 IBM i partitions. They want to improve network availability and allow for concurrent maintenance. What will support the customer requirement at least cost?（）
    A

    Build the logical partition infrastructure based on 6 or more VLANs.

    B

    Build the logical partition infrastructure based on two or more IVEs.

    C

    Build the logical partition infrastructure based on Partition Mobility.

    D

    Build the logical partition infrastructure based on redundant VIO Servers.


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    Which of the following interfaces is required to implement Workload Partition Mobility? （）
    A

     Workload Partitions Manager for AIX

    B

     Hardware Management Console （HMC） GUI

    C

     Integrated Virtualization Manager （IVM）

    D

     Advanced System Management Interface （ASMI）


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    You have an Exchange Server 2010 Mailbox server.The server contains one mailbox database.You need to view the last logon time of all users in the organization.What should you do？（）
    A

    From the Exchange Management Shell， run Get-MailboxDatabase.

    B

    From the Exchange Management Shell， run Get-MailboxStatistics.

    C

    From the Exchange Management Console， create and export a filter.

    D

    From the Exchange Management Console， run the Remote Connectivity Analyzer.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following is a feature of Integrated Virtualization Manager (IVM)? （）
    A

     It has a GUI interface for upgrading system firmware. 

    B

     It creates and manages AIX/Linux and VIOS type LPARs. 

    C

     It can be managed by the Hardware Management Console (HMC). 

    D

     It supports Live Partition Mobility on POWER6 systems and above.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    You need to increase the size of a paging file. What should you do? （）
    A

    From Disk Management， shrink the boot partition.

    B

    From Disk Management， shrink the system partition.

    C

    From System， modify the Advanced system settings.

    D

    From System， modify the System protection settings.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Using the following information: Performance data from an existing system that a new system will replace; Performance estimates that anticipate future workloads; Micro-partitioning and logical partitioning implementations.  Which of the following allows a technical sales representative to create a system design which can be imported into an HMC?（）
    A

    IBM eConfig

    B

    IBM Performance Monitor

    C

    IBM Workload Estimator (WLE)

    D

    IBM System Planning Tool (SPT)


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following access levels allows a user to perform normal day to day work with their own files but does not allow them to change system files or computer performance?（）
    A

    Administrator

    B

    User

    C

    Guest

    D

    Power user


    正确答案： A
    解析： 暂无解析

相关内容