单选题What is a type of firewall enforcer supported by the Junos Pulse Access Control Service?（）A Checkpoint firewallB SRX Series deviceC DP sensorD MX Series device

题目
单选题
What is a type of firewall enforcer supported by the Junos Pulse Access Control Service?（）
A

Checkpoint firewall

B

SRX Series device

C

DP sensor

D

MX Series device

相似考题

1.In a Junos Pulse Access Control Service firewall enforcement configuration, what is the purpose of the source IP policy?()A. to specify the destination addresses to which access is permittedB. to specify the source address permitted to access the resourceC. to specify the services to which access is permittedD. to inform the enforcer to expect policy information from the Junos Pulse Access Control Service

2.You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI).To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）A. CLIB. WebUIC. NSMD. Junos Pulse Access Control Service

3.You have multiple realms configured on a MAG Series device. A user is authenticating with a non- Junos Pulse Access Control Service client. The username does not contain a realm suffix.Which behavior will the user experience?（）A. The user will not be able to log-in, as the Junos Pulse Access Control Service device cannot map the user to a realm when the realm value is empty.B. The user will be mapped to all realms available to the user.C. The Junos Pulse Access Control Service device displays a page where the user must choose from a list of realms.D. The endpoint is assigned to the first realm in the list whose authentication server is a match with the endpoints software.

4.You are validating the configuration of your SRX Series device and see the output shown below.What does this indicate?()A.The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.B.The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.C.The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.D.Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.

更多“单选题What is a type of firewall enforcer supported by the Junos Pulse Access Control Service?（）A Checkpoint firewallB SRX Series deviceC DP sensorD MX Series device”相关问题

  • 第1题：

    You are configuring an active／passive cluster of SRX Series devices as the firewall enforcer on a MAG Series device.Which statement is true?()

    A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device defined in each configuration.

    B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series devices defined in the configuration.

    C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device defined in each configuration.

    D. A single Infranet enforcer instance is created with the VIP of the clustered SRX Series device defined in the configuration.


    参考答案：B

  • 第2题：

    Which two Junos platforms provide stateful firewall functionality?（）

    • A、MX Series
    • B、EX Series
    • C、SRX Series
    • D、QFX Series

    正确答案:A,C

  • 第3题：

    You are installing a MAG Series device for access control using an SRX Series device as the firewall enforcer. The MAG Series device resides in the same security zone as users. However, the users reside in different subnets and use the SRX Series device as an IP gateway.Which statement is true?（）

    • A、You must configure a security policy on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.
    • B、No security policy is necessary on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.
    • C、You must configure host-inbound traffic on the SRX Series device to allow SSL traffic between the MAG Series device and the user devices.
    • D、You must configure host-inbound traffic on the SRX Series device to allow EAP traffic between the MAG Series device and the user devices.

    正确答案:A

  • 第4题：

    You have multiple realms configured on a MAG Series device. A user is authenticating with a non- Junos Pulse Access Control Service client. The username does not contain a realm suffix.Which behavior will the user experience?（）

    • A、The user will not be able to log-in, as the Junos Pulse Access Control Service device cannot map the user to a realm when the realm value is empty.
    • B、The user will be mapped to all realms available to the user.
    • C、The Junos Pulse Access Control Service device displays a page where the user must choose from a list of realms.
    • D、The endpoint is assigned to the first realm in the list whose authentication server is a match with the endpoints software.

    正确答案:D

  • 第5题：

    A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access Controe Service. When configuring the switch on the Junos Pulse Access Control Service, the customer does not find a make/model entry for it . Which two actions should the customer take to make the switch work with the Junos Pulse Access Control Service?（）

    • A、Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
    • B、Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
    • C、Add the switch as a firewall enforcer.
    • D、Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the make/model.

    正确答案:A,D

  • 第6题：

    What are two use cases enabled by IF-MAP Federation?（）

    • A、Users authenticated to one Junos Pulse Access Control Service can transparently access resources protected by another Junos Pulse Access Control Service.
    • B、Users authenticated to a Junos Pulse Access Control Service can transparently access resources protected by a Junos Pulse Secure Access Service.
    • C、Remote access users authenticated to a Junos Pulse Secure Access Service can transparently access resources protected by a Junos Pulse Access Control Service.
    • D、Remote access users authenticated to one Junos Pulse Secure Access Service can transparently access resources protected by another Junos Pulse Secure Access Service.

    正确答案:A,C

  • 第7题：

    You are deploying a Junos Pulse Access Control Service cluster in active/passive mode. How do you configure the IP address on the SRX Series devices?（）

    • A、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP as the IP address the instance.
    • B、Configure multiple Junos Pulse Access Control Service instances on the enforcer, specifying the specific IP address each device in a separate instance.
    • C、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and active node address in the instance.
    • D、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and passive node address in the instance.

    正确答案:A

  • 第8题：

    单选题
    You are validating the configuration of your SRX Series device and see the output shown below. What does this indicate?（）
    A

    The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.

    B

    The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.

    C

    The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.

    D

    Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.


    正确答案： The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service., The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device., The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service., Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.
    解析： 暂无解析

  • 第9题：

    多选题
    You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI). To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）
    A

    CLI

    B

    WebUI

    C

    NSM

    D

    Junos Pulse Access Control Service


    正确答案： A,D
    解析： 暂无解析

  • 第10题：

    单选题
    You are installing a MAG Series device for access control using an SRX Series device as the firewall enforcer. The MAG Series device resides in the same security zone as users. However, the users reside in different subnets and use the SRX Series device as an IP gateway.Which statement is true?（）
    A

    You must configure a security policy on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.

    B

    No security policy is necessary on the SRX Series device to allow traffic to flow from the user devices to the MAG Series device.

    C

    You must configure host-inbound traffic on the SRX Series device to allow SSL traffic between the MAG Series device and the user devices.

    D

    You must configure host-inbound traffic on the SRX Series device to allow EAP traffic between the MAG Series device and the user devices.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    多选题
    What are three benefits of IF-MAP Federation?（）
    A

    Enables seamless access for remote access users to firewall enforcer protected resources.

    B

    Scales a Junos Pulse Access control Service deployment beyond the capacity of a single cluster.

    C

    Enables dynamic configuration synchronization across multiple MAG Series devices.

    D

    Provides a substitute for WAN clustering among geographically separated MAG Series devices.

    E

    Shares non-localized DP integration and IPsec configuration information between multiple Junos Pulse Access Control Service instances.


    正确答案： C,B
    解析： 暂无解析

  • 第12题：

    单选题
    In a Junos Pulse Access Control Service firewall enforcement configuration, what is the purpose of the source IP policy?（）
    A

    to specify the destination addresses to which access is permitted

    B

    to specify the source address permitted to access the resource

    C

    to specify the services to which access is permitted

    D

    to inform the enforcer to expect policy information from the Junos Pulse Access Control Service


    正确答案： A
    解析： 暂无解析

  • 第13题：

    What is a type of firewall enforcer supported by the Junos Pulse Access Control Service?()

    A. Checkpoint firewall

    B. SRX Series device

    C. DP sensor

    D. MX Series device


    参考答案：A

  • 第14题：

    What is a type of firewall enforcer supported by the Junos Pulse Access Control Service?（）

    • A、Checkpoint firewall
    • B、SRX Series device
    • C、DP sensor
    • D、MX Series device

    正确答案:A

  • 第15题：

    In a Junos Pulse Access Control Service firewall enforcement configuration, what is the purpose of the source IP policy?（）

    • A、to specify the destination addresses to which access is permitted
    • B、to specify the source address permitted to access the resource
    • C、to specify the services to which access is permitted
    • D、to inform the enforcer to expect policy information from the Junos Pulse Access Control Service

    正确答案:D

  • 第16题：

    You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty connecting to a protected resource.Which two elements must exist so the user can access the resource?（）

    • A、Resource access policy on the MAG Series device
    • B、IPsec routing policy on the MAG Series device
    • C、General traffic policy blocking access through the firewall enforcer
    • D、Auth table entry on the firewall enforcer

    正确答案:A,D

  • 第17题：

    What are three benefits of IF-MAP Federation?（）

    • A、Enables seamless access for remote access users to firewall enforcer protected resources.
    • B、Scales a Junos Pulse Access control Service deployment beyond the capacity of a single cluster.
    • C、Enables dynamic configuration synchronization across multiple MAG Series devices.
    • D、Provides a substitute for WAN clustering among geographically separated MAG Series devices.
    • E、Shares non-localized DP integration and IPsec configuration information between multiple Junos Pulse Access Control Service instances.

    正确答案:A,B,E

  • 第18题：

    You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI). To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）

    • A、CLI
    • B、WebUI
    • C、NSM
    • D、Junos Pulse Access Control Service

    正确答案:C,D

  • 第19题：

    You are performing the initial setup of a new MAG Series device and have installed a valid CA- signed certificate on the MAG Series device. Connectivity to an existing SRX Series firewall enforcer cannot be obtained.What are two explanations for this behavior?（）

    • A、The MAG Series device has multiple ports associated with the certificate.
    • B、The MAG Series device's serial number needs to be configured on the SRX Series device.
    • C、The SRX Series device must have a certificate signed by the same authority as the MAG Series device.
    • D、The MAG Series device and SRX Series device are not synchronized to an NTP server.

    正确答案:C,D

  • 第20题：

    多选题
    You are performing the initial setup of a new MAG Series device and have installed a valid CA- signed certificate on the MAG Series device. Connectivity to an existing SRX Series firewall enforcer cannot be obtained.What are two explanations for this behavior?（）
    A

    The MAG Series device has multiple ports associated with the certificate.

    B

    The MAG Series device's serial number needs to be configured on the SRX Series device.

    C

    The SRX Series device must have a certificate signed by the same authority as the MAG Series device.

    D

    The MAG Series device and SRX Series device are not synchronized to an NTP server.


    正确答案： A,C
    解析： 暂无解析

  • 第21题：

    单选题
    You are deploying a Junos Pulse Access Control Service cluster in active/passive mode. How do you configure the IP address on the SRX Series devices?（）
    A

    Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP as the IP address the instance.

    B

    Configure multiple Junos Pulse Access Control Service instances on the enforcer, specifying the specific IP address each device in a separate instance.

    C

    Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and active node address in the instance.

    D

    Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and passive node address in the instance.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    What is a type of firewall enforcer supported by the Junos Pulse Access Control Service?（）
    A

    Checkpoint firewall

    B

    SRX Series device

    C

    DP sensor

    D

    MX Series device


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You have multiple realms configured on a MAG Series device. A user is authenticating with a non- Junos Pulse Access Control Service client. The username does not contain a realm suffix.Which behavior will the user experience?（）
    A

    The user will not be able to log-in, as the Junos Pulse Access Control Service device cannot map the user to a realm when the realm value is empty.

    B

    The user will be mapped to all realms available to the user.

    C

    The Junos Pulse Access Control Service device displays a page where the user must choose from a list of realms.

    D

    The endpoint is assigned to the first realm in the list whose authentication server is a match with the endpoints software.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG Series device.Which statement is true?（）
    A

    Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device defined in each configuration.

    B

    A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series devices defined in the configuration.

    C

    Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device defined in each configuration.

    D

    A single Infranet enforcer instance is created with the VIP of the clustered SRX Series device defined in the configuration.


    正确答案： D
    解析： 暂无解析

相关内容