单选题Given the following LSP configuration, which statement is true?（）label-switched-path lsp-xyz { to 10.200.1.1; primary path1; secondary path2; secondary path3; no-cspf; } path path1 { 10.200.10.1 strict; } path path2 { 10.200.20.1 strict; } path path3 {

题目
单选题
Given the following LSP configuration, which statement is true?（）label-switched-path lsp-xyz { to 10.200.1.1; primary path1; secondary path2; secondary path3; no-cspf; } path path1 { 10.200.10.1 strict; } path path2 { 10.200.20.1 strict; } path path3 { 10.200.30.1 loose; }
A

The router will use path1 when it is available and stable.

B

The router will use path3 when it is available and stable.

C

The router will attempt to establish path2 only when path1 and path3 are down.

D

The router will attempt to establish path1 only when path2 and path3 are down.

相似考题

1.Which interface tunnel parameter allows an LSP to use a specified explicit route?()A.path-optionB.route-optionC.explicit-path-optionD.explicit-route-option

2.GiventhefollowingLSPconfiguration，whichstatementistrue？（）label-switched-pathlsp-xyz{to10.2000.1.1；primarypath1；secondarypath2；secondarypath3；no-cspf；}pathpath1{10.200.10.1strict；}pathpath2{10.200.20.1strict；}pathpath3{10.200.30.1loose}A.Therouterwillusepath1whenitisavailableandstable.B.Therouterwillusepath3whenitisavailableandstable.C.Therouterwillattempttoestablishpath2onlywhenpath1andpath3aredown.D.Therouterwillattempttoestablishpath1onlywhenpath2andpath3aredown.

3.What is the default function of a secondary path in MPLS?()A. to act as an equal-cost path to the primary pathB. to enable another LSP for load balancingC. to act as a diverse backup path to the primary pathD. to allow the use of explicit path selection via EROs

4.Given the following LSP configuration, which statement is true? ()A. The router will use path1 when it is available and stable.B. The router will use path3 when it is available and stable.C. The router will attempt to establish path2 only when path1 and path3 are down.D. The router will attempt to establish path1 only when path2 and path3 are down.

参考答案和解析
正确答案： D
解析： 暂无解析
更多“单选题Given the following LSP configuration, which statement is true?（）label-switched-path lsp-xyz { to 10.200.1.1; primary path1; secondary path2; secondary path3; no-cspf; } path path1 { 10.200.10.1 strict; } path path2 { 10.200.20.1 strict; } path path3 {”相关问题

  • 第1题：

    09A设备开通过程中RTD阶段A扇区Path2通路关断，原因可能是（）.

    • A、校准线故障
    • B、RFU故障
    • C、综合控制线故障
    • D、TPA故障
    • E、Path2对应上跳线驻波比过高

    正确答案:B,D,E

  • 第2题：

    语句“rmdir（’path1/path2’）”的执行目的就是递归删除path2和path1。


    正确答案:错误

  • 第3题：

    Given the following LSP configuration， which statement is true？（） label-switched-pathlsp-xyz {  to 10.2000.1.1；  primarypath1；  secondarypath2；  secondarypath3；  no-cspf；  }  pathpath1 {  10.200.10.1 strict；  }  pathpath2 {  10.200.20.1 strict；  }  pathpath3 {  10.200.30.1loose  }

    • A、The router will use path1 when it is available and stable.
    • B、The router will use path3 when it is available and stable.
    • C、The router will attempt to establish path2 only when path1 and path3 are down.
    • D、The router will attempt to establish path1 only when path2 and path3 are down.

    正确答案:A

  • 第4题：

    What is the optimize timer on an RSVP-signaled Label-Switched Path （LSP）？（）

    • A、the time it takes to identify the optimal path for the LSP
    • B、the interval at which the ingress router recalculates the LSP’s path
    • C、the time the ingress router takes to establish the primary path
    • D、the maximum number of times the ingress router tries to establish the primary path

    正确答案:B

  • 第5题：

    Given the following LSP configuration, which statement is true?（）label-switched-path lsp-xyz { to 10.200.1.1; primary path1; secondary path2; secondary path3; no-cspf; } path path1 { 10.200.10.1 strict; } path path2 { 10.200.20.1 strict; } path path3 { 10.200.30.1 loose; }

    • A、The router will use path1 when it is available and stable.
    • B、The router will use path3 when it is available and stable.
    • C、The router will attempt to establish path2 only when path1 and path3 are down.
    • D、The router will attempt to establish path1 only when path2 and path3 are down.

    正确答案:A

  • 第6题：

    Which statement is true about loading data using the conventional path of SQL*Loader（）

    • A、Redo is not generated while performing conventional path loads.
    • B、Only PRIMARY KEY， UNIQUE KEY， and NOT NULL constraints are checked.
    • C、No exclusive locks are acquired when the conventional path loads are performed.
    • D、Instead of performing transactions， SQL*Loader directly writes data blocks to the data files.
    • E、INSERT triggers are disabled before the conventional path load and reenabled at the end of the load

    正确答案:C

  • 第7题：

    单选题
    Which statement is true about loading data using the conventional path of SQL*Loader（）
    A

    Redo is not generated while performing conventional path loads.

    B

    Only PRIMARY KEY， UNIQUE KEY， and NOT NULL constraints are checked.

    C

    No exclusive locks are acquired when the conventional path loads are performed.

    D

    Instead of performing transactions， SQL*Loader directly writes data blocks to the data files.

    E

    INSERT triggers are disabled before the conventional path load and reenabled at the end of the load.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    判断题
    语句“rmdir（’path1/path2’）”的执行目的就是递归删除path2和path1。
    A

    对

    B

    错


    正确答案： 错
    解析： 暂无解析

  • 第9题：

    单选题
    You use—login-path to access a MySQL server on a Linux installation. Which statement is true about the – login-path option that is created by using mysql_config_editor?（）
    A

    All system users have access to the MySQL server via—login path local

    B

    login-path can be used only for MySQL servers running on a local machine

    C

    login-path allows you to provide login credentials without passing clear text passwords on the command line

    D

    When using – login-path to connect to a remote MySQL server, the remote server version must be 5.6 or later


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    What is the optimize timer on an RSVP-signaled Label-Switched Path （LSP）？（）
    A

    the time it takes to identify the optimal path for the LSP

    B

    the interval at which the ingress router recalculates the LSP’s path

    C

    the time the ingress router takes to establish the primary path

    D

    the maximum number of times the ingress router tries to establish the primary path


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Which of the following choices correctly describes the difference between a data load via the conventional path and the direct path?（）
    A

    One runs faster than the other

    B

    A conventional path data load bypasses most of the Oracle RDBMS, whereas a direct path load is a high-speed version of the SQL INSERT

    C

    A direct path data load bypasses most of the Oracle RDBMS, whereas a conventional path load is a high-speed version of the SQL INSERT

    D

    The conventional path runs when the CONVENTIONAL command-line parameter is set to TRUE


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Given the following LSP configuration， which statement is true？（） label-switched-pathlsp-xyz {  to 10.2000.1.1；  primarypath1；  secondarypath2；  secondarypath3；  no-cspf；  }  pathpath1 {  10.200.10.1 strict；  }  pathpath2 {  10.200.20.1 strict；  }  pathpath3 {  10.200.30.1loose  }
    A

    The router will use path1 when it is available and stable.

    B

    The router will use path3 when it is available and stable.

    C

    The router will attempt to establish path2 only when path1 and path3 are down.

    D

    The router will attempt to establish path1 only when path2 and path3 are down.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Unicast Reverse Path Forwarding （Urpf ） can work in the following modes：（）

    • A、Express mode
    • B、Strict mode
    • C、Loose mode
    • D、Tunnel mode
    • E、Safe mode

    正确答案:B,C

  • 第14题：

    Which statement is true about a routing table?（）

    • A、It contains routers learned dynamically only
    • B、It finds the best path to each destination by using a modified shortest-path-first calculation
    • C、It contains only active BGP routes
    • D、It contains all accepted routes to all destinations

    正确答案:D

  • 第15题：

    What is the default function of a secondary path in MPLS?（）

    • A、to act as an equal-cost path to the primary path
    • B、to enable another LSP for load balancing
    • C、to act as a diverse backup path to the primary path
    • D、to allow the use of explicit path selection via EROs

    正确答案:C

  • 第16题：

    What is the optimize timer on an RSVP-signaled Label-Switched Path (LSP)?（）

    • A、The time it takes to identify the optimal path for the LSP.
    • B、The interval at which the ingress router recalculates the LSP's path.
    • C、The time the ingress router takes to establish the primary path.
    • D、The maximum number of times the ingress router tries to establish the primary path.

    正确答案:B

  • 第17题：

    Which statement is true about loading data using the conventional path of SQL*Loader（）

    • A、Redo is not generated while performing conventional path loads.
    • B、Only PRIMARY KEY， UNIQUE KEY， and NOT NULL constraints are checked.
    • C、No exclusive locks are acquired when the conventional path loads are performed.
    • D、Instead of performing transactions， SQL*Loader directly writes data blocks to the data files.
    • E、INSERT triggers are disabled before the conventional path load and reenabled at the end of the load.

    正确答案:C

  • 第18题：

    Which of the following choices correctly describes the difference between a data load via the conventional path and the direct path?（）

    • A、One runs faster than the other
    • B、A conventional path data load bypasses most of the Oracle RDBMS, whereas a direct path load is a high-speed version of the SQL INSERT
    • C、A direct path data load bypasses most of the Oracle RDBMS, whereas a conventional path load is a high-speed version of the SQL INSERT
    • D、The conventional path runs when the CONVENTIONAL command-line parameter is set to TRUE

    正确答案:C

  • 第19题：

    单选题
    Which statement is true about loading data using the conventional path of SQL*Loader（）
    A

    Redo is not generated while performing conventional path loads.

    B

    Only PRIMARY KEY， UNIQUE KEY， and NOT NULL constraints are checked.

    C

    No exclusive locks are acquired when the conventional path loads are performed.

    D

    Instead of performing transactions， SQL*Loader directly writes data blocks to the data files.

    E

    INSERT triggers are disabled before the conventional path load and reenabled at the end of the load


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    What is the optimize timer on an RSVP-signaled Label-Switched Path (LSP)?（）
    A

    The time it takes to identify the optimal path for the LSP.

    B

    The interval at which the ingress router recalculates the LSP's path.

    C

    The time the ingress router takes to establish the primary path.

    D

    The maximum number of times the ingress router tries to establish the primary path.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    Given the following LSP configuration, which statement is true? （）
    A

    The router will use path1 when it is available and stable.

    B

    The router will use path3 when it is available and stable.

    C

    The router will attempt to establish path2 only when path1 and path3 are down.

    D

    The router will attempt to establish path1 only when path2 and path3 are down.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Given the following LSP configuration, which statement is true?（）label-switched-path lsp-xyz { to 10.200.1.1; primary path1; secondary path2; secondary path3; no-cspf; } path path1 { 10.200.10.1 strict; } path path2 { 10.200.20.1 strict; } path path3 { 10.200.30.1 loose; }
    A

    The router will use path1 when it is available and stable.

    B

    The router will use path3 when it is available and stable.

    C

    The router will attempt to establish path2 only when path1 and path3 are down.

    D

    The router will attempt to establish path1 only when path2 and path3 are down.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    What is the default function of a secondary path in MPLS?（）
    A

    to act as an equal-cost path to the primary path

    B

    to enable another LSP for load balancing

    C

    to act as a diverse backup path to the primary path

    D

    to allow the use of explicit path selection via EROs


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    Which configuration would allow for non-revertative LSP path failover？（）
    A

    A

    B

    B

    C

    C

    D

    D


    正确答案： B
    解析： 暂无解析

相关内容