单选题A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A Use a jumper from the motherboard where the new drive is going to be installed.B Use a jumper from a hard d

题目
单选题
A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）
A

Use a jumper from the motherboard where the new drive is going to be installed.

B

Use a jumper from a hard drive that is no longer functioning.

C

Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.

D

The new hard drive must be replaced

相似考题

1.A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?()A. Use a jumper from the motherboard where the new drive is going to be installed.B. Use a jumper from a hard drive that is no longer functioning.C. Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D. The new hard drive must be replaced

2. The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）A、Connect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.B、Move the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.C、Move the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.D、Move the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus.

3.A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A、Use a jumper from the motherboard where the new drive is going to be installed.B、Use a jumper from a hard drive that is no longer functioning.C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D、The new hard drive must be replaced

4.A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller.Which of the following is the MOST likely cause of the problem?（）A. Both hard drives have the master jumper in place.B. One hard drive is set as master and the other slave.C. The hard drive data cable is reversed.D. Both hard drives have the cable select jumper in place.

更多“单选题A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A Use a jumper from the motherboard where the new drive is going to be installed.B Use a jumper from a hard d”相关问题

  • 第1题：

    A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?（）

    • A、Both hard drives have the master jumper in place.
    • B、One hard drive is set as master and the other slave.
    • C、The hard drive data cable is reversed.
    • D、Both hard drives have the cable select jumper in place.

    正确答案:A

  • 第2题：

    On which of the following hard drive types must Bob, a technician, change the jumper setting to match the motherboard/cabling combination?（）

    • A、SATA
    • B、eSATA
    • C、Solid state
    • D、PATA

    正确答案:D

  • 第3题：

    After a technician installs a new CMOS battery on a motherboard, which of the following will thetechnician have to change? （）

    • A、Firmware version
    • B、System date/time
    • C、Bus speeds
    • D、Jumper settings

    正确答案:B

  • 第4题：

    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）

    • A、The second hard drive has not been formatted for NTFS.
    • B、The jumpers on both drives are set to the cable select position.
    • C、The jumper on the first drive is set to master and the second is set to slave.
    • D、The jumpers on both drives are set to the master position.

    正确答案:D

  • 第5题：

    Which of the following is eliminated when using SATA instead of PATA technology？（）

    • A、Jumper selection
    • B、Power connector
    • C、Data port connector
    • D、Hard drive LEDs

    正确答案:A

  • 第6题：

    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）

    • A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.
    • B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.
    • C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.
    • D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.

    正确答案:D

  • 第7题：

    单选题
    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）
    A

    Disk Management

    B

    Services and Applications

    C

    Removable Storage

    D

    Device Manager


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）
    A

    The new drive’s jumper is set for master.

    B

    The new drive is connected to the secondary bus as a slave drive.

    C

    Both drives’ jumpers are set for cable select.

    D

    The old drive’s jumper is set for master and the new drive is set for slave.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）
    A

    The second hard drive has not been formatted for NTFS.

    B

    The jumpers on both drives are set to the cable select position.

    C

    The jumper on the first drive is set to master and the second is set to slave.

    D

    The jumpers on both drives are set to the master position.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）
    A

    Add another hard drive and use that available space.

    B

    Run FDISK.

    C

    Use the Disk Management tool.

    D

    Back up all important data to an external drive then reformat the hard drive.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    If a technician needs to convert a hard drive from Basic to Dynamic, which of the following utilities would the technician use?（）
    A

    Add Hardware Wizard

    B

    Device Manager

    C

    Computer Management

    D

    Disk Management


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）
    A

    Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.

    B

    Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.

    C

    Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.

    D

    Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    If a technician needs to convert a hard drive from Basic to Dynamic, which of the following utilities would the technician use?（）

    • A、Add Hardware Wizard
    • B、Device Manager
    • C、Computer Management
    • D、Disk Management

    正确答案:D

  • 第14题：

    In which of the following locations would a technician set the LBA mode for a hard drive？（）

    • A、Jumper Settings
    • B、Disk Manager
    • C、Device Manager
    • D、System BIOS

    正确答案:D

  • 第15题：

    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

    • A、Install a larger fan near the hard drive to cool the system.
    • B、Clean the drive with compressed air and continue to use it.
    • C、Remove and replace the drive.
    • D、Apply more thermal compound and reseat the drive.

    正确答案:C

  • 第16题：

    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

    • A、Add another hard drive and use that available space.
    • B、Run FDISK.
    • C、Use the Disk Management tool.
    • D、Back up all important data to an external drive then reformat the hard drive.

    正确答案:C

  • 第17题：

    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）

    • A、The new drive’s jumper is set for master.
    • B、The new drive is connected to the secondary bus as a slave drive.
    • C、Both drives’ jumpers are set for cable select.
    • D、The old drive’s jumper is set for master and the new drive is set for slave.

    正确答案:A

  • 第18题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第19题：

    单选题
    The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）
    A

    Connect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.

    B

    Move the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.

    C

    Move the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.

    D

    Move the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）
    A

    Install a larger fan near the hard drive to cool the system.

    B

    Clean the drive with compressed air and continue to use it.

    C

    Remove and replace the drive.

    D

    Apply more thermal compound and reseat the drive.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    On which of the following hard drive types must Bob, a technician, change the jumper setting to match the motherboard/cabling combination?（）
    A

    SATA

    B

    eSATA

    C

    Solid state

    D

    PATA


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?（）
    A

    Both hard drives have the master jumper in place.

    B

    One hard drive is set as master and the other slave.

    C

    The hard drive data cable is reversed.

    D

    Both hard drives have the cable select jumper in place.


    正确答案： C
    解析： 暂无解析

相关内容