单选题Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）A The drive will run at the lower SATA 1 speed.B The drive will not work due to incompatibility.C The drive will run at the higher SATA 2 speed.D The drive

题目
单选题
Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）
A

The drive will run at the lower SATA 1 speed.

B

The drive will not work due to incompatibility.

C

The drive will run at the higher SATA 2 speed.

D

The drive will have intermittent POST errors.

相似考题

1.Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?()A. Format the partitionB. Load any RAID or SATA drivers neededC. Partition the driveD. Configure Windows settings

2. A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）A、Have the client purchase a SATA compatible system board.B、Have the client purchase a SATA to IDE conversion kit.C、Have the client return the drive and purchase an IDE compatible drive.D、Have the client purchase a SCSI to SATA conversion kit.

3.Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）A、Format the partitionB、Load any RAID or SATA drivers neededC、Partition the driveD、Configure Windows settings

4.Which of the following internal storage media types has the GREATEST storage capacity?()A. Compact flash driveB. SATA hard driveC. Blu-Ray driveD. SDLT Tape drive

更多“单选题Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）A The drive will run at the lower SATA 1 speed.B The drive will not work due to incompatibility.C The drive will run at the higher SATA 2 speed.D The drive”相关问题

  • 第1题：

    An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）

    • A、SATA to SCSI
    • B、SATA to HBA
    • C、SATA to USB
    • D、SATA to SAS

    正确答案:C

  • 第2题：

    Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）

    • A、The drive will run at the lower SATA 1 speed.
    • B、The drive will not work due to incompatibility.
    • C、The drive will run at the higher SATA 2 speed.
    • D、The drive will have intermittent POST errors.

    正确答案:A

  • 第3题：

    Which of the following is the correct connector for an internal floppy drive?（）

    • A、50-pin SCSI
    • B、40-pin ribbon
    • C、34-pin ribbon
    • D、4-pin SATA

    正确答案:C

  • 第4题：

    A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）

    • A、The drive jumper settings are incorrect.
    • B、The drive is not receiving power from PSU.
    • C、Windows only supports one optical drive.
    • D、The user connected the drive with a SATA cable.

    正确答案:A

  • 第5题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第6题：

    A customer with three Windows servers wants to create a shared storage array. One server runs a200 GB Oracle database with high transaction rates. The second server is a file server with 3 TBof data and the third server is a mail server with 150 GB of storage. The key customer decisionmaker has only purchased EMC CX storage products in his previous employment. Cost is a keyconsideration. From the following which is a key feature that could convince the customer topurchase a DS3500 over an EMC CX storage system?（）

    • A、 SATA and SAS 2.0 disk drive technology can be mixed in different enclosures 
    • B、 nearline SAS 2.0 and SAS 2.0 disk drive technology can be mixed in the same enclosure
    • C、 SATA disk drive technology can provide both the high transaction rates and large drive sizesneeded for this solution 
    • D、 SAS 2.0 disk drive technology can provide both the high transaction rates and large drive sizesneeded for this solution

    正确答案:B

  • 第7题：

    单选题
    Which of the following is eliminated when using SATA instead of PATA technology？（）
    A

    Jumper selection

    B

    Power connector

    C

    Data port connector

    D

    Hard drive LEDs


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）
    A

    The drive will run at the lower SATA 1 speed.

    B

    The drive will not work due to incompatibility.

    C

    The drive will run at the higher SATA 2 speed.

    D

    The drive will have intermittent POST errors.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）
    A

    The BIOS is set with the wrong boot order.

    B

    The jumpers have not been set on the hard drive.

    C

    The hard drive is not compatible with the system board.

    D

    The boot.ini file needs to be modified.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）
    A

    The drive jumper settings are incorrect.

    B

    The drive is not receiving power from PSU.

    C

    Windows only supports one optical drive.

    D

    The user connected the drive with a SATA cable.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A customer with three Windows servers wants to create a shared storage array. One server runs a200 GB Oracle database with high transaction rates. The second server is a file server with 3 TBof data and the third server is a mail server with 150 GB of storage. The key customer decisionmaker has only purchased EMC CX storage products in his previous employment. Cost is a keyconsideration. From the following which is a key feature that could convince the customer topurchase a DS3500 over an EMC CX storage system?（）
    A

     SATA and SAS 2.0 disk drive technology can be mixed in different enclosures 

    B

     nearline SAS 2.0 and SAS 2.0 disk drive technology can be mixed in the same enclosure

    C

     SATA disk drive technology can provide both the high transaction rates and large drive sizesneeded for this solution 

    D

     SAS 2.0 disk drive technology can provide both the high transaction rates and large drive sizesneeded for this solution


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）
    A

    Format the partition

    B

    Load any RAID or SATA drivers needed

    C

    Partition the drive

    D

    Configure Windows settings


    正确答案： B
    解析： 暂无解析

  • 第13题：

    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

    • A、Install a larger fan near the hard drive to cool the system.
    • B、Clean the drive with compressed air and continue to use it.
    • C、Remove and replace the drive.
    • D、Apply more thermal compound and reseat the drive.

    正确答案:C

  • 第14题：

    Which of the following is eliminated when using SATA instead of PATA technology？（）

    • A、Jumper selection
    • B、Power connector
    • C、Data port connector
    • D、Hard drive LEDs

    正确答案:A

  • 第15题：

    An administrator is configuring RAID 1 in a server.  The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter.  How should the administrator BEST configure these drives？（）

    • A、Install one drive on the first channel and install the second drive on the second channel.
    • B、Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.
    • C、Install both drives on the same channel. Cable both drives as the primary master on the samecable.
    • D、Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.

    正确答案:B

  • 第16题：

    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）

    • A、The BIOS is set with the wrong boot order.
    • B、The jumpers have not been set on the hard drive.
    • C、The hard drive is not compatible with the system board.
    • D、The boot.ini file needs to be modified.

    正确答案:A

  • 第17题：

    Which of the following drive types can be combined in a single EXP5000 expansion unit?（）

    • A、SSD, SATA and FC only 
    • B、SSD, SAS and FDE only 
    • C、SSD, FDE, SATA and FC only 
    • D、SSD, SAS, FDE, FC and SATA

    正确答案:C

  • 第18题：

    单选题
    An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）
    A

    SATA to SCSI

    B

    SATA to HBA

    C

    SATA to USB

    D

    SATA to SAS


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    Which of the following is the correct connector for an internal floppy drive?（）
    A

    50-pin SCSI

    B

    40-pin ribbon

    C

    34-pin ribbon

    D

    4-pin SATA


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）
    A

    Install a larger fan near the hard drive to cool the system.

    B

    Clean the drive with compressed air and continue to use it.

    C

    Remove and replace the drive.

    D

    Apply more thermal compound and reseat the drive.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）
    A

    Have the client purchase a SATA compatible system board.

    B

    Have the client purchase a SATA to IDE conversion kit.

    C

    Have the client return the drive and purchase an IDE compatible drive.

    D

    Have the client purchase a SCSI to SATA conversion kit.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    Which of the following drive types can be combined in a single EXP5000 expansion unit?（）
    A

    SSD, SATA and FC only 

    B

    SSD, SAS and FDE only 

    C

    SSD, FDE, SATA and FC only 

    D

    SSD, SAS, FDE, FC and SATA


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    An administrator is configuring RAID 1 in a server.  The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter.  How should the administrator BEST configure these drives？（）
    A

    Install one drive on the first channel and install the second drive on the second channel.

    B

    Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.

    C

    Install both drives on the same channel. Cable both drives as the primary master on the samecable.

    D

    Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.


    正确答案： A
    解析： 暂无解析

相关内容