单选题A modem is set up for a remote TTY connection that will become the system console.  How should one verify that the console is enabled as the system console after the next reboot？（）A lscons -bB lscons -dC lscons -sD swcons /dev/tty0

题目
单选题
A modem is set up for a remote TTY connection that will become the system console.  How should one verify that the console is enabled as the system console after the next reboot？（）
A

lscons -b

B

lscons -d

C

lscons -s

D

swcons /dev/tty0

相似考题

1.An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31.What is the most likely cause?()A.The system is waiting for user input to define console type lft0.B.The system is waiting for user input to define console type tty0.C.The system is waiting for user input to define console type vty0.D.The system is waiting for user input to define console type vsa0.

2.Whichofthefollowingcommandsshouldbeusedtocheckthesettingsforanewttythatwasjustsetupastty2?()A.lsattr-Eltty2B.lscons-d/dev/tty2C.lscfg-vltty2D.what/dev/tty2

3.A server is being set up at a client location. The system has been powered up for a clean install of the base OS. The CD is in the drive. After 5 minutes, the system is hung. There is no activity with the CD-ROM drive and nothing to select on the screen. Which of the following procedures should be performed next?（）A.Boot off diskette and change boot device to CDB.Change the bootlist for normal mode and rebootC.Reboot and press 5/F5 after keyboard is displayed on the screenD.Press enter to open SP menus once OK is showing in the LEDs

4.AmodemissetupforaremoteTTYconnectionthatwillbecomethesystemconsole.Howshouldoneverifythattheconsoleisenabledasthesystemconsoleafterthenextreboot?()A.lscons-bB.lscons-dC.lscons-sD.swcons/dev/tty0

参考答案和解析
正确答案： D
解析： 暂无解析
更多“单选题A modem is set up for a remote TTY connection that will become the system console.  How should one verify that the console is enabled as the system console after the next reboot？（）A lscons -bB lscons -dC lscons -sD swcons /dev/tty0”相关问题

  • 第1题：

    Which of the following will permit an operator to retrieve console log output from the command line?()

    A. lscons -l

    B. cat /var/conslog

    C. alog -t console -o

    D. lslog /var/adm/conslog


    参考答案：C

  • 第2题：

    An administrator does not have console access to a Windows Server. Which of the following command line utilities should the administrator use to reboot the system remotely？（）

    • A、reboot
    • B、pkill
    • C、shutdown
    • D、kill

    正确答案:C

  • 第3题：

    A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）

    • A、The profile data was not initialized after restoring the backup CD
    • B、The profile data was not backed up before doing the Critical Console Data backup
    • C、A Critical Console Data backup was performed which backs up user data， but not profile data
    • D、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

    正确答案:B

  • 第4题：

    An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31.  What is the most likely cause？（）

    • A、The system is waiting for user input to define console type lft0.
    • B、The system is waiting for user input to define console type tty0.
    • C、The system is waiting for user input to define console type vty0.
    • D、The system is waiting for user input to define console type vsa0.

    正确答案:C

  • 第5题：

    A System p administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down.  Where should the system administrator look for the console log， assuming it is in the default location（）

    • A、/var/log/conslog
    • B、/var/log/console.log
    • C、/var/adm/ras/conslog
    • D、/var/ras/console.log

    正确答案:C

  • 第6题：

    The System Administrator wants to do a backup of the HMC and notices that there are two options on the HMC menu: Backup Critical Console data and Save Upgrade Data. Which of the following best describes the differences between the two options?（）

    • A、Both options back up user and partition profile data. Only the Backup Critical Console Data backs up TCP/IP settings or preferences
    • B、Both options back up partition profile information. Only the Backup Critical Console Data backs up service function settings, such as Inventory Scout, Service Agent, and Service Focal Point
    • C、The Backup Critical Console Data should be performed just before the HMC software update operation. The Save Upgrade Data should be performed each time configuration changes are made to the system or the HMC
    • D、The Save Upgrade Data should be performed just before the HMC software update operation. The Backup Critical Console Data should be performed each time configuration changes are made to the system or the HMC

    正确答案:D

  • 第7题：

    A system administrator has created tty2 on a serial port connection to a system.  When attempting to verify the connection the following error is observed：   # cu -ml tty2   cu： 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error？（）

    • A、Create an entry for tty2 in the /etc/uucp/Devices file
    • B、Re-enter the command as "cu -dml tty2"
    • C、Create an entry for tty2 in the /etc/uucp/Systems file
    • D、Re-enter the command as "cu -s 9600 -dh -t -l tty2"

    正确答案:A

  • 第8题：

    单选题
    Which of the following commands should be used to check the settings for a new tty that was just set up as tty2？（）
    A

    lsattr -El tty2

    B

    lscons -d /dev/tty2

    C

    lscfg -vl tty2

    D

    what /dev/tty2


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator does not have console access to a Windows Server. Which of the following command line utilities should the administrator use to reboot the system remotely？（）
    A

    reboot

    B

    pkill

    C

    shutdown

    D

    kill


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A System p administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down.  Where should the system administrator look for the console log， assuming it is in the default location（）
    A

    /var/log/conslog

    B

    /var/log/console.log

    C

    /var/adm/ras/conslog

    D

    /var/ras/console.log


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）
    A

    The profile data was not initialized after restoring the backup CD

    B

    The profile data was not backed up before doing the Critical Console Data backup

    C

    A Critical Console Data backup was performed which backs up user data， but not profile data

    D

    A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A system was running properly until a reboot. Following the reboot， the system LED displayed cycles between 0223 and 0229. Which of the following procedures should be performed next？（）
    A

    Power down then power up the system

    B

    Boot into diagnostic mode and run fsck

    C

    Boot from installation media and run bosboot

    D

    Boot into maintenance mode and check the bootlist


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A system administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down. Where should the system administrator look for the console log， assuming it is in the default location？（）

    • A、/tmp/conslog
    • B、/etc/console.log
    • C、/var/adm/ras/conslog
    • D、/var/ras/console.log

    正确答案:C

  • 第14题：

    A modem is set up for a remote TTY connection that will become the system console.  How should one verify that the console is enabled as the system console after the next reboot？（）

    • A、lscons -b
    • B、lscons -d
    • C、lscons -s
    • D、swcons /dev/tty0

    正确答案:A

  • 第15题：

    A server is being set up at a client location. The system has been powered up for a clean install of the base OS. The CD is in the drive. After 5 minutes, the system is hung. There is no activity with the CD-ROM drive and nothing to select on the screen. Which of the following procedures should be performed next?（）

    • A、Boot off diskette and change boot device to CD
    • B、Change the bootlist for normal mode and reboot
    • C、Reboot and press 5/F5 after keyboard is displayed on the screen
    • D、Press enter to open SP menus once OK is showing in the LEDs

    正确答案:C

  • 第16题：

    A graphics card has been added and the system rebooted. When running the lsdev-Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?（）

    • A、Reboot system sing the mkdev -l command.
    • B、Install device support suing the cfgmgr -i command.
    • C、Use the SMIT console to redirect the console.
    • D、Use SMIT devices and choose the correct adapter.

    正确答案:B

  • 第17题：

    Which of the following commands should be used to check the settings for a new tty that was just set up as tty2？（）

    • A、lsattr -El tty2
    • B、lscons -d /dev/tty2
    • C、lscfg -vl tty2
    • D、what /dev/tty2

    正确答案:A

  • 第18题：

    Which of the following will permit an operator to retrieve console log output from the command line?（）

    • A、lscons -l
    • B、cat /var/conslog
    • C、alog -t console -o
    • D、lslog /var/adm/conslog

    正确答案:C

  • 第19题：

    单选题
    A system administrator has created tty2 on a serial port connection to a system.  When attempting to verify the connection the following error is observed：   # cu -ml tty2   cu： 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error？（）
    A

    Create an entry for tty2 in the /etc/uucp/Devices file

    B

    Re-enter the command as cu -dml tty2

    C

    Create an entry for tty2 in the /etc/uucp/Systems file

    D

    Re-enter the command as cu -s 9600 -dh -t -l tty2


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    The System Administrator wants to do a backup of the HMC and notices that there are two options on the HMC menu: Backup Critical Console data and Save Upgrade Data. Which of the following best describes the differences between the two options?（）
    A

    Both options back up user and partition profile data. Only the Backup Critical Console Data backs up TCP/IP settings or preferences

    B

    Both options back up partition profile information. Only the Backup Critical Console Data backs up service function settings, such as Inventory Scout, Service Agent, and Service Focal Point

    C

    The Backup Critical Console Data should be performed just before the HMC software update operation. The Save Upgrade Data should be performed each time configuration changes are made to the system or the HMC

    D

    The Save Upgrade Data should be performed just before the HMC software update operation. The Backup Critical Console Data should be performed each time configuration changes are made to the system or the HMC


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A system administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down. Where should the system administrator look for the console log， assuming it is in the default location？（）
    A

    /tmp/conslog

    B

    /etc/console.log

    C

    /var/adm/ras/conslog

    D

    /var/ras/console.log


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?（）
    A

    The system is waiting for user input to define console type lft0.

    B

    The system is waiting for user input to define console type tty0.

    C

    The system is waiting for user input to define console type vty0.

    D

    The system is waiting for user input to define console type vsa0.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.You need to reduce the number of events registered in the system log on Printer1. What should you do?（）
    A

    Open the Event Viewer console. Create a custom view for the system log. Exclude the events that are notified by Event ID 10 from the filter.

    B

    Open the Print Management console. Open the properties of Printer1 and clear the Log spooler information events option. 

    C

    Open the Print Management console. Open the properties of Printer1 and clear the Show informational notifications for network printers option. 

    D

    Open the Print Management console. Open the properties of each individual printer on Printer1 and clear the Enable advanced printing features option.


    正确答案： A
    解析： 暂无解析

相关内容