单选题An adapter state does not show available after a reboot.  Which of the following is the most probable cause？（）A DNS is not working properlyB Ping is not working properlyC The cables are disconnectedD The device driver did not load properly

题目
单选题
An adapter state does not show available after a reboot.  Which of the following is the most probable cause？（）
A

DNS is not working properly

B

Ping is not working properly

C

The cables are disconnected

D

The device driver did not load properly

相似考题

1.A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）A. The device needs a firmware updateB. The device needs an updated driver installedC. The plugged in device is too slow for the USB port speedD. The device is incompatible with the installed version of Windows

2.An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）A. The NIC is not on the HCL.B. The driver is incorrect on the server.C. The patch cable has not been seated properly.D. The NIC is not seated properly.

3.After putting on a self-contained breathing apparatus, you open the air supply and hear a continuous ringing of a bell. What does this mean?______.A.The unit is working properlyB.The face mask is not sealed properlyC.The air bottle needs to be refilledD.The air supply hose has a leak

4.A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS.Which of the following would be the FIRST step in regaining access to the drive?（）A. Reformat the NTFS partition.B. Recreate the partition that was deleted.C. Rewrite the MBR.D. Run a check disk on the drive

更多“单选题An adapter state does not show available after a reboot.  Which of the following is the most probable cause？（）A DNS is not working properlyB Ping is not working properlyC The cables are disconnectedD The device driver did not load properly”相关问题

  • 第1题：

    Which of the following commands is used to change device driver settings for a network adapter？（）

    • A、no
    • B、chdev
    • C、frcactrl
    • D、ifconfig

    正确答案:B

  • 第2题：

    A laptop operates on battery power when connected with an AC adapter. Once the battery discharges, the computer turns off and will not turn back on. Which of the following are the MOST likely causes of the laptop issue? （）(Select TWO).

    • A、The LCD monitor’s power inverter does not function properly.
    • B、The operating system’s power settings prevent the battery from charging.
    • C、The battery is not compatible with the laptop.
    • D、The internal power connection on the motherboard is faulty.
    • E、The power adapter is not working.

    正确答案:D,E

  • 第3题：

    An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS， but it does not receive an IP address. Which of the following is the MOST likely cause of this？（）

    • A、The NIC is not on the HCL.
    • B、The driver is incorrect on the server.
    • C、The patch cable has not been seated properly.
    • D、The NIC is not seated properly.

    正确答案:C

  • 第4题：

    Mike, a technician, is working on several workstations and needs to continuously investigatesystems so he knows when the workstations reboot. Which of the following commands could beused?（）

    • A、ping -l 9999
    • B、tracert -d
    • C、ping -t
    • D、tracert -h 9999

    正确答案:C

  • 第5题：

    Due to slow backup response， an administrator installed a new driver for the SCSI card. After a server reboot the device is not working properly.  Which of the following is the BEST course of action？（）

    • A、Reboot the server and restore files using ASR.
    • B、In Device Manager， locate the device， and click Roll Back Driver at the driver tab.
    • C、Restore the driver from the previous backup tape.
    • D、Go to Device Manager， locate the device， and click Restore Previous Driver at the driver tab.

    正确答案:B

  • 第6题：

    An adapter state does not show available after a reboot.  Which of the following is the most probable cause？（）

    • A、DNS is not working properly
    • B、Ping is not working properly
    • C、The cables are disconnected
    • D、The device driver did not load properly

    正确答案:D

  • 第7题：

    单选题
    You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）
    A

    Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings

    B

    Start the computer in the debug mode. Restore the original adapter driver settings

    C

    Start the computer in Safe mode. Rename the AGP device by using device manager

    D

    Start the computer by using the recovery console. Rename the AGP driver. 


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    An adapter state does not show available after a reboot.  Which of the following is the most probable cause？（）
    A

    DNS is not working properly

    B

    Ping is not working properly

    C

    The cables are disconnected

    D

    The device driver did not load properly


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）
    A

    The device needs a firmware update

    B

    The device needs an updated driver installed

    C

    The plugged in device is too slow for the USB port speed

    D

    The device is incompatible with the installed version of Windows


    正确答案： A
    解析： 暂无解析

  • 第10题：

    多选题
    A laptop operates on battery power when connected with an AC adapter. Once the battery discharges, the computer turns off and will not turn back on. Which of the following are the MOST likely causes of the laptop issue? （）(Select TWO).
    A

    The LCD monitor’s power inverter does not function properly.

    B

    The operating system’s power settings prevent the battery from charging.

    C

    The battery is not compatible with the laptop.

    D

    The internal power connection on the motherboard is faulty.

    E

    The power adapter is not working.


    正确答案： A,B
    解析： 暂无解析

  • 第11题：

    单选题
    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）
    A

    Reformat the NTFS partition.

    B

    Recreate the partition that was deleted.

    C

    Rewrite the MBR.

    D

    Run a check disk on the drive


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    Due to slow backup response， an administrator installed a new driver for the SCSI card. After a server reboot the device is not working properly.  Which of the following is the BEST course of action？（）
    A

    Reboot the server and restore files using ASR.

    B

    In Device Manager， locate the device， and click Roll Back Driver at the driver tab.

    C

    Restore the driver from the previous backup tape.

    D

    Go to Device Manager， locate the device， and click Restore Previous Driver at the driver tab.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A technician cannot access the print queue to delete a print job. Which of the following is the MOST likely cause of this issue? （）

    • A、Print spooler has stalled
    • B、Device driver has failure
    • C、Incorrect form is printing
    • D、Incompatible driver is installed

    正确答案:A

  • 第14题：

    A user explains that after the office was vacuumed the previous night their sound is not working and they cannot get onto the network. The user has verified that all of the PC’s cables are plugged into their respective ports. Which of the following is the MOST likely cause?（）

    • A、Frayed or broken cables
    • B、UPS is unplugged
    • C、NIC and sound card are disabled in Device Manager
    • D、Speakers are muted

    正确答案:A

  • 第15题：

    A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）

    • A、The device needs a firmware update
    • B、The device needs an updated driver installed
    • C、The plugged in device is too slow for the USB port speed
    • D、The device is incompatible with the installed version of Windows

    正确答案:B

  • 第16题：

    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）

    • A、 Reformat the NTFS partition.
    • B、 Recreate the partition that was deleted.
    • C、 Rewrite the MBR.
    • D、 Run a check disk on the drive.

    正确答案:D

  • 第17题：

    A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）

    • A、The driver CD is for Windows XP only.
    • B、The technician needs to initialize the NIC first within Device Manager before installing a driver.
    • C、The driver on the CD is not digitally signed.
    • D、The driver is corrupt.

    正确答案:A

  • 第18题：

    You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）

    • A、Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings
    • B、Start the computer in the debug mode. Restore the original adapter driver settings
    • C、Start the computer in Safe mode. Rename the AGP device by using device manager
    • D、Start the computer by using the recovery console. Rename the AGP driver. 

    正确答案:A

  • 第19题：

    单选题
    Which of the following commands indicates the available state of a physical adapter？（）
    A

    lscfg

    B

    lsdev

    C

    netstat

    D

    ifconfig


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）
    A

    The driver CD is for Windows XP only.

    B

    The technician needs to initialize the NIC first within Device Manager before installing a driver.

    C

    The driver on the CD is not digitally signed.

    D

    The driver is corrupt.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS， but it does not receive an IP address. Which of the following is the MOST likely cause of this？（）
    A

    The NIC is not on the HCL.

    B

    The driver is incorrect on the server.

    C

    The patch cable has not been seated properly.

    D

    The NIC is not seated properly.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）
    A

     Reformat the NTFS partition.

    B

     Recreate the partition that was deleted.

    C

     Rewrite the MBR.

    D

     Run a check disk on the drive.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Which of the following commands is used to change device driver settings for a network adapter？（）
    A

    no

    B

    chdev

    C

    frcactrl

    D

    ifconfig


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    A user explains that after the office was vacuumed the previous night their sound is not working and they cannot get onto the network. The user has verified that all of the PC’s cables are plugged into their respective ports. Which of the following is the MOST likely cause?（）
    A

    Frayed or broken cables

    B

    UPS is unplugged

    C

    NIC and sound card are disabled in Device Manager

    D

    Speakers are muted


    正确答案： B
    解析： 暂无解析

相关内容