Disk heartbeat
Error notification
Event notification
Application monitor
第1题:
An administrator has added an additional network adapter to each cluster node. The adapters have been configured and tested, and the /etc/hosts file has been updated. However,the adapters do not appear in the pick list when the administrator tries to define the adapters to HACMP. What would be required to correct this problem?()
第2题:
A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory, four 10/100/1000 TX LAN adapters, and six fibre channel adapters to external storage in an IBM ESS (Shark). They like the idea of being able to do SAN maintenance while not incurring downtime. If all LPARs are production related and similar, which question is most appropriate for the pSeries technical specialist to ask?()
第3题:
A small organization is purchasing a POWER5 to consolidate four applications. Currently, each application has two Host Bus Adapters (HBA) connected to an Enterprise Storage Server (ESS). The customer is concerned about the cost of purchasing eight new HBAs. Which feature of virtualization will be most beneficial to this organization?()
第4题:
Company.com has a non-IBM disk storage unit connected by two Fibre channel connections. The Nodes have multiple connections to the storage device that allow load balancing. A failure with one Fibre adapter or connection will not be noticed by the application, but it needs to be addressed. How can HACMP help make this environment more robust?()
第5题:
A customer has six Windows 2003 servers, three RedHat Linux servers, and three Netware servers. The current environment is direct attached storage. The customer needs a 2Gb Fibre solution that can scale up to 64 partitions over the next three years and provide connectivity to all three platforms. The customer also needs a fibre attached backup solution. Which of the following solutions has the best combination of price and performance?()
第6题:
You need to recommend the server configurations for the new failover cluster. The configurations must support the company's planned changes Which two actions should you recommend?()
第7题:
Would 10/100 Ethernets work as well?
Should there be eight fibre channel adapters?
Should there be an async adapter for heartbeat?
Will all LPARs need access to a common fibre channel tape drive?
第8题:
One fibre channel switch
Two fibre channel switches
Two Ethernet cards
Nothing
第9题:
LPAR-A with 1Gb FC HBA and SAN connection
LPAR-B with 2Gb FC HBA and SAN connection
LPAR-C with 4Gb FC HBA and SAN connection
LPAR-D with 8Gb FC HBA and SAN connection
第10题:
Disk heartbeat
Error notification
Event notification
Application monitor
第11题:
Dual power supplies.
Twice the amount of disk.
Two dual-port LHEA adapters.
Two dual-port fibre channel adapters.
第12题:
Customize disk heartbeat methods to detect disk adapter failures.
Customize an error notification method that monitors for volume group quorum loss.
Customize an error notification facility to act on the event when reported to the error log.
Customize a HACMP event script to monitor the disk connections and cause a fallover if there is a failure.
第13题:
A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?()
第14题:
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?()
第15题:
Company.com has non-IBM fibre attached storage. The storage is connected to a node in the cluster that has multiple adapters and virtual paths. There is a concern about detecting the loss of one of the fibre adapters since there is no indication to the administrator that one has failed. What feature of HACMP can be sued to assist with this issue?()
第16题:
A cluster administrator has been asked to install HACMP on two nodes with the following hardware: -two CPUs, - 1GB RAM, - one 1 36GB drive, -two 10/100/1000 Ethernet adapters, and -GB Fibre Channel adapters dual attached to SAN storage. In order to eliminate single points of failure,the administrator should first add which of the following:()
第17题:
All servers on your network run Windows Server 2008 R2. You plan to configure multiple highly available virtual machines (HAVMs) on a Hyper-V failover cluster. You need to recommend a storage solution that supports high availability. Which storage solution should you recommend?()
第18题:
Stop the node.
Stop the cluster.
Run autodiscovery.
Configure the IP adapter.
第19题:
SAN switches
Fibre channel Hub(s)
IBM Storage Manager Agents
IBM Subsystem Device Driver
第20题:
Create LVM mirrors between LUNs
MPIO is necessary as the device driver
Use separate fibre adapters in the Virtual IO Server for each LUN
Virtual IO Server is a disk subsystem and must control the LUNs behind it
第21题:
an additional 1GB RAM to each node.
Another bootable mirrored disk drive.
A 10/100/1000 GB Ethernet adapter to be attached to a redundant switch.
Nothing,because this is a viable cluster solution with no single points of failure.
第22题:
Rerun autodiscovery.
Synchronize the cluster.
Restart cluster services.
Delete and recreate the adapters.
第23题:
A DS4300 Turbo with Fibre Attached Tape Library
A DS4500 with EXP700’s and Fibre Attached Tape Library
A DS4500 with EXP710’s and Fibre Attached Tape Library
A DS4300 with Additional EXP710’s and a SCSI Attached Tape Library
第24题:
Set Multiple Core Scaling (MCS) value of the port group to 8 and set multiple core parameter of the client Ethernet adapters to yes.
Set Multiple Core Scaling (MCS) value of the port group to 4 and set multiple core parameter of the client Ethernet adapters to yes.
Set Multiple Core Scaling (MCS) value of one of the physical port groups to 4 and set multiple core parameter of the client Ethernet adapters to yes.
Set Multiple Core Scaling (MCS) value of one of the physical port groups to 8 and set the multiple core parameter of the client Ethernet adapters to yes.