单选题Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape.  Which of the following actions will en

第1题：

Which of the following options applies to virtual Ethernet devices（）

• A、A virtual Ethernet adapter can only connect to other partitions within the same system.
• B、A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.
• C、A partition can support an unlimited number of virtual Ethernet devices.
• D、A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the "trunk flag" set

第2题：

A file on the system ahs been lost, but the latest version is on a mksysb tape. The file is extracted from this mksysb tape by loading the tape. Which of the following indicates where the tape will be skipped forward?（）

• A、Third image, and resoting the file with the tar command
• B、Third image, and restoring the file with the dd command
• C、Fourth image, and restoring the file with the restore command
• D、Fourth image followed by the tar command

第3题：

A system is being planned with three production partitions, one each for an IBM i, AIX standard edition, and Power Linux applications. One fibre-channel attached TS3100 tape library will be shared between the partitions for backup. Which solution provides tape library sharing with minimum operator intervention?（）

• A、Configure VIO Server Express Edition to control the tape library through one fibre channel card.Assign the  library to the production partitions when needed.
• B、Configure the IBM i partition to own the tape library.Use IBM i virtualization to host a virtual tape library  connection to the AIX and Linux partition.Assign the library to the production partitions when needed.
• C、Configure a fibre channel card for each partition， and a configure fibre switch.Connect the partitions and  tape library to the switch.Zone the switch so all partitions can enable the tape when needed and disable  the tape when finished.
• D、Configure AIX to control the tape library through one fibre channel adapter.Use AIX virtualization to host a  virtual tape library connection to the IBM i and Linux partitions.Assign the library to the production  partitions when needed.

第4题：

A system administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape？（）

• A、dd
• B、tar
• C、cpio
• D、restore

第5题：

Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 - partition one - required  SCSI adapter 01 - partition one - desired  IDE adapter 01 - partition one - required  Ethernet adapter 01 - partition one - required  Ethernet adapter 01 - partition two - required  SCSI adapter 02 - partition two - required  IDE adapter 01 - partition two - desired  Which of the following actions will enable the installation of the AIX image？（）

• A、Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.
• B、Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.
• C、Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.
• D、Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.

第6题：

You are planning to deploy Windows 7 Enterprise to all of your company’s client computers. You have the following requirements：  Create two custom partitions on each client computer’s hard disk， one for the operating system and the other for data.  Automatically create the partitions during Windows Setup.    You need to design an image that meets the requirements.   What should you do？（）

• A、Use Windows PE to create the partitions. Install Windows 7 on the first partition.
• B、Use Windows System Image Manager （Windows SIM） to specify the partition configuration.
• C、Use Disk Management to create the two partitions on the hard disk.
• D、Use SysPrep to create the two partitions during Windows Setup.

第7题：

第8题：

第9题：

第10题：

第11题：

第12题：

第13题：

An administrator is required to backup 250GB nightly utilizing a single LTO2 tape. The administrator reports that the tape drive is running out of available space before the job completes. Which of the following would allow the administrator to backup this data?（）

• A、Enable compression on the LTO2 drive
• B、Utilize LTO3 tapes in the existing drive
• C、Reduce the amount of data on the backup
• D、Replace the LTO2 with LTO3 drive and tapes
• E、Divide the data and back up half one night and half the next

第14题：

Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）

• A、Create all the partitions as AIX 5.2， each having two dedicated processors.
• B、Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.
• C、Specify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.
• D、Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.

第15题：

A System p administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect.  Which of the following commands can be used to determine the block size of the backup tape （）

• A、dd
• B、tar
• C、cpio
• D、restore

第16题：

Company.com is adding a new I/O drawer to an existing p5-570 with four LPARs and wants to re-balance the network cards in the I/O drawers. What is the best way to accomplish this？（）

• A、Add the devices as virtual adapters to a VIO server first,then add the I/O drawer and create the shared ethernet adapters
• B、Power down the partitions,run the diag a command when the system is brought back up and reconfigure the network cards
• C、Use the rmdev command to remove the devices,shut down the partitions and move the cads,then run the cfgmgr command after reboot
• D、Detach the network cards,run rmdev on the devices and then dynamically reassign theadapters to the partitions and reconfigure

第17题：

You have a computer that runs Windows XP professional. The computer contains one partition and a floppy disk drive. You connect a new USB drive. You need to back up the computer to meet the following requirements: Enable a complete recovery if the hard disk fails. Enable an automatic restore of the operating systems. Automatically recreate the partitions during a restore process. What should you do?（）

• A、From System Restore, create a system restore point.
• B、From the System Tools menu, run the Files and Settings Transfer Wizard.
• C、From Windows Backup, run the Automated System Recovery (ASR) Wizard. 
• D、From Windows Backup, run the Backup Wizard, and then select Only backup the System State data. 

第18题：

第19题：

第20题：

第21题：

第22题：

第23题：

第24题：