Create all the partitions as AIX 5.2, each having two dedicated processors.
Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.
Specify an AIX 5.2 partition using dedicated processors, reducing the number of processors in the shared pool.
Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
第1题:
Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak. What is the best configuration to fully utilize the processor resource?()
第2题:
Company.com has a two-way p5-520 that will be running three shared processor Micro-Partitions consuming 60 percent of system resources. Immediately prior to shipment, the customer discovered they need to run a fourth server that requires AIX 5L V5.2. Which of the following will satisfy this requirement?()
第3题:
A p5-570 8-way 32GB system has been proposed to a customer as a new test system with four LPARs. The current applications are certified on AIX 5.2 but not yet on AIX 5.3. The customer wants to understand the advantages and disadvantages of this solution versus a pair of 4-way p5-550s with 16GB each in testing their current applications. Which of the following points should the pSeries technical specialist highlight?()
第4题:
Company.com has purchased a 2-way p5-520 and would like to create three Micro-Partitions on the server. Which feature of Advanced POWER Virtualization would allow them to create the desired number of partitions?()
第5题:
Companycom has just installed a p5 595 with four uncapped LPARs in a shared processor pool. The system and profile settings are still in their default states. One of the LPARs has an application that is consuming all of the available shared processor resources. Users of this application are complaining about response time. Which of the following changes to the slow LPAR would improve response time?()
第6题:
Companycom is planning a p5 595 running AIX 5L 5.3 LPARs. They would like to design the system using physical resources with maximum resource efficiency. One LPAR requires a peak load of 30 processors during the week with a low of 1 processor required on the weekend. The other LPAR requires only a single processor most of the time, but needs at least 24 processors at the beginning of the weekend to finish its weekly processing in the window allocated. Which of the following solutions is most appropriate to continuously maximize resource use for these two LPARs?()
第7题:
A shared pool with four capped LPARs
A shared pool with four uncapped LPARs
Four dedicated LPARs and use DLPAR to manage resources effectively
The server in SMP mode and use WLM to manage resources effectively
第8题:
Change to a 4-way p5-550
Use Capacity on Demand
Configure a fourth logical partition
Add memory to the configuration
第9题:
HACMP and four processors for the p5-570
HACMP and eight processors for the p5-570
HACMP-XD and a 4-way p5-570 in a second location
HACMP-XD and a 8-way p5-570 in a second location
第10题:
Create all the partitions as AIX 5.2, each having two dedicated processors.
Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.
Specify an AIX 5.2 partition using dedicated processors, reducing the number of processors in the shared pool.
Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
第11题:
The p5-570 would save rack space over a pair of p5-550 servers.
The p5-570 allows for more CPU and memory resources to be dynamically allocated to any LPAR for performance testing.
The p5-570 can only be upgraded to 64GB of RAM without replacing memory.
The p5-570 supports advanced features such as Micro-Partitioning and Virtual I/O allowing more LPARs of the customer’s applications with fewer processors and fewer I/O adapters.
第12题:
Enable SMT
Reduce the weight
Renice the process
Increase the weight
第13题:
Company.com has four pSeries servers in their data center and wants to deploy multiple Micro-Partitions. Which of the following data center servers can be used for this purpose?()
第14题:
Company.com wants to change the resource allocation for their AIX 5L V5.3 micro LPAR system. What is the smallest processor allocation than can be moved between partitions?()
第15题:
The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors. The system is a test system to run AIX 5.2. The customer has stated a preference for internal disks for the boot devices. The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements?()
第16题:
A customer needs a system supporting four partitions, each with the following requirements: ? 0.6 1.65GHz processors ? 2GB memory ? AIX 5.2 They also need the ability to grow the system in the future. Which pSeries system would be positioned best to meet this customer’s requirements?()
第17题:
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?()
第18题:
Allocate the HBA to a client partition.
Restart the Virtual I/O Server to detect the changes.
Install the device driver for the DS8000 in each of the four AIX partitions.
Allocate the HBA to the VIO server partition and install necessary drivers.
第19题:
The uncapped weight has been set to 0.
The uncapped weight has been set to 128.
The processing unit for that partition was set to .1 processing units. A full processor was assigned.
The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.
第20题:
Set up the server in SMP mode and use WLM to manage resources effectively
Set up eight dedicated LPARs and use DLPAR to manage resources effectively
Set up a shared pool with eight capped LPARs including production and test/dev
Set up a shared pool with eight uncapped LPARs with priority weight to Production
第21题:
7311-D20 drawer with four disks
Upgrade to AIX 5.3
Fiber adapters to attach to SAN
Nothing
第22题:
p5-520 running Virtual I/O Server
p690 running AIX 5L V5.3
p5-510 running AIX 5L V5.2
p5-520 running two dedicated processor partitions
第23题:
Dynamic LPAR
Workload Manager
Partition Load Manager
Shared Processor Pools
第24题:
It will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.
It has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.
It is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.
It can support six LPARs with internal disks but will require special features, cables and an adapter to support the additional LPARs with internal disks.