The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directive

题目

The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）

  • A、It is a hardware problem caused by the power failure.
  • B、There is a network problem, most probably with name resolution.
  • C、Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.
  • D、Some filesets may be marked as broken and need to be reinstalled.
相似考题

1.A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）A.lslpp -f IX49035B.lslpp -fB U437542C.instfix -f IX49035D.instfix -ik IX49035

2.An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available.Which media should the administrator use?（）A.AnyAIXbootablemedia，providingitisa64-bitvariantB.AnyAIXbootablemedia，providingitisAIX5.1orlaterC.AnyAIX5.3bootablemedia，providingitisTL09orlaterD.AnyAIX6.1bootablemedia，providingitisTL02orlater

3.The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）A.It is a hardware problem caused by the power failure.B.There is a network problem, most probably with name resolution.C.Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.D.Some filesets may be marked as broken and need to be reinstalled.

4.A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9.What does this mean?()A.The system is configuring a device.B.A system initiated dump has started.C.The system is varyingon a volume group.D.The system is running an inbuilt self test.

更多“The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directive”相关问题

  • 第1题：

    A system administrator has edited the necessary files for setup of an AIX system to serve as a bootp server.  Which of the following commands is required to complete the activation？（）

    • A、telinit -q
    • B、startsrc -s bootpd
    • C、refresh -s inetd

    正确答案:C

  • 第2题：

    A System p administrator plans to install a new system with AIX 5.3 TL5 using a NIM server.  Which of the following provide post install diagnostics（）

    • A、SPOT
    • B、lpp_source
    • C、mksysb
    • D、install CD

    正确答案:A

  • 第3题：

    The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）

    • A、System reboot
    • B、Reseat the memory
    • C、Install the latest firmware
    • D、Install the latest driver

    正确答案:B

  • 第4题：

    A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）

    • A、/usr/bin/errmsg "System upgraded to AIX 5.2"
    • B、/usr/bin/errlog "System upgraded to AIX 5.2"
    • C、/usr/bin/errupdate "System upgraded to AIX 5.2"
    • D、/usr/bin/errlogger "System upgraded to AIX 5.2"

    正确答案:D

  • 第5题：

    An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a 64-bit kernel. The administrator has a selection of media available.  Which media should the administrator use？（）

    • A、Any AIX bootable media， providing it is a 64-bit variant
    • B、Any AIX bootable media， providing it is AIX 5.1 or later
    • C、Any AIX 5.3 bootable media， providing it is TL09 or later
    • D、Any AIX 6.1 bootable media， providing it is TL02 or later

    正确答案:C

  • 第6题：

    An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available. Which media should the administrator use?（）

    • A、AnyAIXbootablemedia，providingitisa64-bitvariant
    • B、AnyAIXbootablemedia，providingitisAIX5.1orlater
    • C、AnyAIX5.3bootablemedia，providingitisTL09orlater
    • D、AnyAIX6.1bootablemedia，providingitisTL02orlater

    正确答案:C

  • 第7题：

    A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）

    • A、The ODM is corrupted.
    • B、There is a hardware failure.
    • C、The bosboot command failed.
    • D、Not enough space is available in the filesystems.

    正确答案:C

  • 第8题：

    A System p administrator in a manufacturing customer plans to migrate an AIX 5.2 system to a new LPAR on an existing System p using VIOS.  Which of the following must be completed prior to this migration （）

    • A、Upgrade system firmware to latest level
    • B、Upgrade to AIX 5.3
    • C、Upgrade HMC to version 6.1
    • D、Convert rootvg filesystems to JFS2

    正确答案:B

  • 第9题：

    A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）

    • A、lslpp -f IX49035
    • B、lslpp -fB U437542
    • C、instfix -f IX49035
    • D、instfix -ik IX49035

    正确答案:D

  • 第10题：

    单选题
    A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）
    A

    /usr/bin/errmsg System upgraded to AIX 5.2

    B

    /usr/bin/errlog System upgraded to AIX 5.2

    C

    /usr/bin/errupdate System upgraded to AIX 5.2

    D

    /usr/bin/errlogger System upgraded to AIX 5.2


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）
    A

    The ODM is corrupted.

    B

    There is a hardware failure.

    C

    The bosboot command failed.

    D

    Not enough space is available in the filesystems.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A System p administrator plans to install a new system with AIX 5.3 TL5 using a NIM server.  Which of the following provide post install diagnostics（）
    A

    SPOT

    B

    lpp_source

    C

    mksysb

    D

    install CD


    正确答案： A
    解析： 暂无解析

  • 第13题：

    An administrator has added a new device to a system and wants to determine if it has been correctly added to the ODM database. Which command would the system administrator use？（）

    • A、odmget
    • B、odmadd
    • C、odmshow
    • D、odmcreate

    正确答案:A

  • 第14题：

    A system administrator will be migrating a server from AIX 5.1 to AIX 5.2 and is uncertain if the application running on the server will function properly after the migration. What is the fastest way to return to the previous AIX level if the application does not work？（）

    • A、Use base media to restore system to AIX 5.1.
    • B、Use an alt_disk_install and boot back to the AIX 5.1 rootvg.
    • C、Make a mksysb of the original AIX to restore back to the AIX 5.1 level.
    • D、Perform the AIX 5.2 upgrade using update_all with the commit option and reject filesets to return to AIX 5.1.

    正确答案:B

  • 第15题：

    An administrator is troubleshooting issues on an application server.After a root cause analysis，the administrator has determined that there were some unauthorized logins to the server.Which of the following locations would BEST help to determine details about the unauthorized logins？（）

    • A、Active Directory
    • B、DHCP logs
    • C、Security logs
    • D、System logs

    正确答案:C

  • 第16题：

    A system administrator decides to review the system error log after installing new hardware. Which of the following is the correct command to use？（）

    • A、errpt
    • B、syslog
    • C、prtdiag
    • D、errlogger

    正确答案:A

  • 第17题：

    A new application has been added to a system which needs to automatically be started at system startup. The system administrator has decided to accomplish this by using the /etc/inittab file. Which command would be used to accomplish this in a supported manner？（）

    • A、vi
    • B、mkitab
    • C、telinit
    • D、startsrc

    正确答案:B

  • 第18题：

    After completing an installation of new software， a system administrator notices the system is slow.  To troubleshoot the performance， which single AIX command could be used to provide a real-time display of CPU， memory and disk utilization（）

    • A、topas
    • B、vmo
    • C、iostat
    • D、netstat

    正确答案:B

  • 第19题：

    A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9. What does this mean?（）

    • A、The system is configuring a device.
    • B、A system initiated dump has started.
    • C、The system is varyingon a volume group.
    • D、The system is running an inbuilt self test.

    正确答案:B

  • 第20题：

    A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）

    • A、A 5.1 AIX base media set
    • B、A 5.1 Additional Device Driver CD
    • C、A mksysb of the multiprocessor chrp server
    • D、A savevg of the uniprocessor microchannel server

    正确答案:A

  • 第21题：

    单选题
    The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）
    A

    It is a hardware problem caused by the power failure.

    B

    There is a network problem, most probably with name resolution.

    C

    Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.

    D

    Some filesets may be marked as broken and need to be reinstalled.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A system administrator has edited the necessary files for setup of an AIX system to serve as a bootp server.  Which of the following commands is required to complete the activation？（）
    A

    telinit -q

    B

    startsrc -s bootpd

    C

    refresh -s inetd


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）
    A

    A 5.1 AIX base media set

    B

    A 5.1 Additional Device Driver CD

    C

    A mksysb of the multiprocessor chrp server

    D

    A savevg of the uniprocessor microchannel server


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9. What does this mean?（）
    A

    The system is configuring a device.

    B

    A system initiated dump has started.

    C

    The system is varyingon a volume group.

    D

    The system is running an inbuilt self test.


    正确答案： B
    解析： 暂无解析

相关内容