Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link?（）A、show interfaces interfaceB、show vlan briC、show interfaces interface switchportD、show interface interface trunkE、show interfaces v

题目

Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link?（）

  • A、show interfaces interface
  • B、show vlan bri
  • C、show interfaces interface switchport
  • D、show interface interface trunk
  • E、show interfaces vlan
相似考题

1.What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

2.Refer to the exhibit. You have a non-Cisco switch that is not communicating properly while connected to the distribution-layer Cisco switching fabric.Which two best-practice actions can you take to overcome this problem? （）(Choose two.)A. Turn off MST (802.1s) on all switches.B. Turn on MST (802.1s) on all switches.C. Turn on RSTP (802.1w) on all switches.D. Turn off RSTP (802.1w) on all switches.

3.What must an administrator do in order to successfully configure a VLAN trunk between two switches?()A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

4.You need to configure two Ezonexam switches to exchange VLAN information. Which protocol provides a method of sharing VLAN configuration information between these two switches?A. STPB. 802.1QC. VLSMD. ISLE. VTPF. HSRPG. None of the above

参考答案和解析
正确答案:C,D
更多“Two switches are connected throu”相关问题

  • 第1题：

    To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus?()

    A. to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 link

    B. to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 link

    C. to two core switches from redundant distribution switches connected with a Layer 2 link

    D. to two core switches from redundant distribution switches connected with a Layer 3 link

    E. to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO


    参考答案：D

  • 第2题：

    In a Cisco Unified Computing System， where are SAN port channels connected to？（）

    • A、 Only to Cisco Fibre Channel switches
    • B、 Only to Cisco Fibre Channel switches in NPIV mode
    • C、 To any Fibre Channel switch
    • D、 Directly to storage arrays
    • E、 Only to Nexus Switches

    正确答案:A

  • 第3题：

    To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus？（）

    • A、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 link
    • B、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 link
    • C、 to two core switches from redundant distribution switches connected with Layer 2 link
    • D、 to two core switches from redundant distribution switches connected with Layer 3 link
    • E、 to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO

    正确答案:D

  • 第4题：

    Two Company switches are connected via a trunk link. In this network， the original frame is  encapsulated and an additional header is added before the frame is carried over a trunk link. At  the receiving end， the header is removed and the frame is forwarded to the assigned VLAN.  This  describes which technology？（）

    • A、 DISL
    • B、 ISL
    • C、 DTP
    • D、 IEEE 802.1Q
    • E、 MPLS
    • F、 None of the other alternatives apply

    正确答案:B

  • 第5题：

    Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link？（）

    • A、show interfaces interface
    • B、show vlan brief
    • C、show interfaces interface switchport
    • D、show interface interface trunk
    • E、show interfaces vlan

    正确答案:C,D

  • 第6题：

    What are two reasons a network administrator would use CDP (Choose two.)（）。

    • A、to verify the type of cable interconnecting two devices
    • B、to determine the status of network services on a remote device
    • C、to obtain VLAN information from directly connected switches
    • D、to verify Layer 2 connectivity between two devices when Layer 3 fails
    • E、to obtain the IP address of a connected device in order to telnet to the device
    • F、to determine the status of the routing protocols between directly connected routers

    正确答案:D,E

  • 第7题：

    单选题
    In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?（）
    A

    Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.

    B

    A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.

    C

    A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.

    D

    A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    多选题
    Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link？（）
    A

    show interfaces interface

    B

    show vlan brief

    C

    show interfaces interface switchport

    D

    show interface interface trunk

    E

    show interfaces vlan


    正确答案： E,A
    解析： 暂无解析

  • 第9题：

    单选题
    In a Cisco Unified Computing System， where are SAN port channels connected to？（）
    A

     Only to Cisco Fibre Channel switches

    B

     Only to Cisco Fibre Channel switches in NPIV mode

    C

     To any Fibre Channel switch

    D

     Directly to storage arrays

    E

     Only to Nexus Switches


    正确答案： E
    解析： 暂无解析

  • 第10题：

    多选题
    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）
    A

    STP root status

    B

    VTP mode

    C

    Negotiation status

    D

    Management domain

    E

    Configuration revision number


    正确答案： A,C
    解析： 暂无解析

  • 第11题：

    单选题
    A company needs to connect seven of their Windows-based servers to a DS4000 storage server.   The DS4000 only has two host-side connections， and each server has two HBAs.  Which of the following is the lowest cost solution to provide no single points of failure？（）
    A

    Implement two 8-port switches design with ISLs

    B

    Implement two 16-port switches design with ISLs

    C

    Implement two 8-port switches design without ISLs

    D

    Implement two 16-port switches design without ISLs


    正确答案： A
    解析： 暂无解析

  • 第12题：

    多选题
    You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）
    A

    A root VTP server

    B

    A trunk port

    C

    VTP priority

    D

    VLAN 1

    E

    None of the other alternatives apply


    正确答案： E,C
    解析： 暂无解析

  • 第13题：

    Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link?()

    A.show interfaces interface

    B.show vlan bri

    C.show interfaces interface switchport

    D.show interface interface trunk

    E.show interfaces vlan


    参考答案：C, D

  • 第14题：

    You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）

    • A、A root VTP server
    • B、A trunk port
    • C、VTP priority
    • D、VLAN 1
    • E、None of the other alternatives apply

    正确答案:B,D

  • 第15题：

    In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?（）

    • A、Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.
    • B、A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.
    • C、A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.
    • D、A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.

    正确答案:B

  • 第16题：

    Which of the following offers the highest level of redundancy in the design of a storage system？（）

    • A、 A Dual Port HBA with a pair of Point-To-Point connections to the SAN.
    • B、 Two Single Port HBAs connected to a fiber switch.
    • C、 A Dual Port HBA with a Point-To-Point connection to a SAN.
    • D、 Two Dual Port HBAs connected to a pair of fiber switches.

    正确答案:D

  • 第17题：

    Which two characteristics are most typical of a SAN？ （）

    • A、 NICs are used for network connectivity.
    • B、 Servers request specific blocks of data.
    • C、 Storage devices are directly connected to servers.
    • D、 A fabric is used as the hardware for connecting servers to storage devices.
    • E、 The TCO is higher because of the cost of director class storage switches.

    正确答案:B,D

  • 第18题：

    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）

    • A、STP root status
    • B、VTP mode
    • C、Negotiation status
    • D、Management domain
    • E、Configuration revision number

    正确答案:D,E

  • 第19题：

    单选题
    Which of the following offers the highest level of redundancy in the design of a storage system？（）
    A

     A Dual Port HBA with a pair of Point-To-Point connections to the SAN.

    B

     Two Single Port HBAs connected to a fiber switch.

    C

     A Dual Port HBA with a Point-To-Point connection to a SAN.

    D

     Two Dual Port HBAs connected to a pair of fiber switches.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）
    A

    The access link needs to be configured in multiple VLANs.

    B

    The link between the switches is configured in the wrong VLAN.

    C

    The link between the switches needs to be configured as a trunk.

    D

    VTP is not configured to carry VLAN information between the switches.

    E

    Switch IP addresses must be configured in order for traffic to be forwarded between the switches


    正确答案： D
    解析： 暂无解析

  • 第21题：

    多选题
    What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）
    A

    Set each end of the trunk line to IEEE 802.1Q encapsulation.

    B

    Set the same VTP management domain name on both switches.

    C

    Set all ports on the two switched as access ports.

    D

    Configure one of the two switches as a VTP server.

    E

    Connect the two switches using a rollover cable.

    F

    Use a router to forward VTP traffic between the VLANs.


    正确答案： A,D
    解析： 暂无解析

  • 第22题：

    多选题
    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）
    A

    Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B

    The VTP management domain name of both switches must be set the same.

    C

    All ports on both the switches must be set as access ports.

    D

    One of the two switches must be configured as a VTP server.

    E

    A rollover cable is required to connect the two switches together.

    F

    A router must be used to forward VTP traffic between VLANs.


    正确答案： C,E
    解析： 暂无解析

  • 第23题：

    单选题
    To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus？（）
    A

     to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 link

    B

     to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 link

    C

     to two core switches from redundant distribution switches connected with Layer 2 link

    D

     to two core switches from redundant distribution switches connected with Layer 3 link

    E

     to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    Two Company switches are connected via a trunk link. In this network， the original frame is  encapsulated and an additional header is added before the frame is carried over a trunk link. At  the receiving end， the header is removed and the frame is forwarded to the assigned VLAN.  This  describes which technology？（）
    A

     DISL

    B

     ISL

    C

     DTP

    D

     IEEE 802.1Q

    E

     MPLS

    F

     None of the other alternatives apply


    正确答案： E
    解析： 暂无解析

相关内容