You want to install Windows 2000 Professional on 20 new PXE compliant computers, which do not have operating systems installed. You create a RIS image and load the image onto the RIS server and then start the new computers. You find that the new computers

第1题：

第2题：

第3题：

You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）

• A、On your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to  install the correct multiprocessor HAL. 
• B、On the original computer, through the Add New Hardware, select the processor from the  device list and install the required processor. 
• C、Download the patch from the motherboard manufacturer to allow the configuration of dual  processors. 
• D、Reinstall Windows 2000 Professional on both the test computers.

第4题：

You want to install Windows 2000 Professional on 45 new computers on your company’s network. You first install Windows 2000 Professional on one of the new computers. You log on to the computer by using the local administrator account.  You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured. You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network.  What should you do?（）

• A、Run Rbfg.exe before installing the standard applications. 
• B、Run RIPrep.exe before installing the standard applications. 
• C、Copy the all users profile to the default users profile.
• D、Copy the local administrator account profile to the default users profile

第5题：

Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）

• A、The bindings.
• B、A DNS address.
• C、A Gateway address.
• D、A WINS server address.
• E、A DHCP server address.

第6题：

You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services，and configuring aweb services infrastructure. You have the Windows Deployment Services （WDS） role installed on a serverthat runs Windows Server 2008. You plan to install Windows Vista on a computer that does not supportPreboot Execution Environment （PXE）. You have a Windows Vista image that is stored on the WDS server. You have to start the computer and install the image that is stored on the WDS server. What should you create？（）

• A、You should create a discover image
• B、You should create an install image
• C、You should create a capture image
• D、You should create a CD-ROM that contains PXE drivers

第7题：

You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）

• A、Ask a domain administrator to authorize the RIS server. 
• B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.
• C、Install RIS on the domain controller. Copy the RIS image to the domain controller.
• D、Add a reservation for the RIS server to the DHCP server. 

第8题：

You are preparing to install Windows 2000 Professional on 100 MPS-compliant computers. Each computer has two 550-MHz processors. The Computers are configured identically. You want to use one of the computers as a reference computer for deploying Windows 2000 Professional to the remaining Computers.   You install Windows 2000 Professional on the reference computer. You view Device Manager and notice that the drivers for the second processor are not installed. You want to add support for the second processor on the remaining 99 computers. You want to accomplish this with the least amount of administrative effort.  What should you do? （）

• A、 Use Setup Manager to configure the reference computer, and then create a disk image. 
• B、 Use the System Preparation Tool with the -pnp parameter to set up the reference disk, and  then create a disk image. 
• C、 Use Device Manager to add the appropriate hardware abstraction layer (HAL) to the  reference computer to support the second processor, and then Create a disk image. 
• D、 After imaging the reference computer, restart the reference computer in safe mode and add  the driver for the second processor.

第9题：

You are preparing to install Windows 2000 Professional on 75 new computers. You want to create a standard installation image to use on all the new computers. The computers have several different configurations of hard disks and hardware components.  You install Windows 2000 Professional and other standard software on one of the computers. You log on to the computer using the local Administrator account. You configure the standard applications and customize the desktop settings you intend to deploy.  You run the Setup Manager and create a Sysprep.inf file. You copy Sysprep.exe and Setupcl.exe to the C:/Sysprep folder. You run Sysprep.exe and run your third party disk imaging software.  You copy the image to the several test computers and restart the computers. When the installation is complete, you find that some of the computers do not function at all. You also find that the desktop settings do not appear as you have configured them on the original computer. You want to correct the imaging process and ensure that all computers have the same standard desktop. What should you do?（）

• A、 Copy Sysprep.inf to C:///Sysprep folder.
• B、 Copy the Administrator profile to the Default User profile， and then grant permissions to the   Everyone group to use the profile.
• C、 Include the -pnp parameter for Sysprep.exe when you rerun that utility.
• D、 Include the -nosidgen parameter for Sysprep.exe when you rerun that utility.

第10题：

You are preparing to install Windows 2000 Professional on 75 new computers. You want to create a standard installation image to use on all of the new computers. The computers have several different configurations of hard disks and other hardware components. You install Windows 2000 Professional and the other standard software on one of the computers. You long on to the computer by using the local Administrator account. You configure the standard applications and customize the desktop settings you intend to deploy. You run Setup Manager and create the Sysprep.inf file. You copy Sysprep.exe and Setupcl.exe to the C:///Sysprep folder. You run Sysprep.exe and then run your third-party disk imaging software.You copy the image to several test computers and restart the computers. When the installation is complete， you find that some of the computers do not function at all. You also find that the desktop settings do not appear as you had configured them on the original computer.You want to correct the imaging process and ensure that all computers have the same standard desktop. What should you do？（）

• A、Copy Sysprep.inf to the C:///Sysprep folder.
• B、Copy the Administrator profile to the Default user profile. Then grant permissions to theEveryone group to use the profile.
• C、Include the –pnp parameter for Sysprep.exe when you rerun that utility.
• D、Include the –nosidgen parameter for Sysprep.exe when you rerun that utility.

第11题：

第12题：

第13题：

第14题：

You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers.  You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.  What should you do?（）

• A、Configure the DHCP scope to add additional IP addresses.
• B、Run Rbfg.exe from the RemoteInstall/Admin folder on the RIS server.
• C、Modify the startup sequence in the CMOS of the remaining computers.
• D、Create computer accounts on the remaining computers in the active directory.

第15题：

Your company has 1，000 client computers.  You are planning to deploy Windows 7 and a new line-of-business application.   You have the following requirements：   Install the application as part of the standard Windows 7 deployment. Use a single Windows 7 image for the deployment.  The application must be available for use on client computers that are not connected to the network.   You need to ensure that the application is installed on all new client computers.   What should you do？（）

• A、Publish the application by using Group Policy Software Installation.
• B、Deploy the application by using Windows Server Update Services （WSUS）.
• C、Service an online image of Windows 7 to add the new application.
• D、Service an offline image of Windows 7 to add the new application.

第16题：

You are the network administrator for Company.  Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers  to the network.   You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet.    You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72   You want to enable the Windows 2000 Professional computers to communicate outside their own subnet.   What should you do?（）

• A、Install a DHCP server.
• B、Install a WINS server. Configure each computer to use WINS.
• C、Create an Lmhost file on each computer.
• D、Create a Hosts file on each computer.

第17题：

As the administrator of your Windows 2000 corporate network you need to install Windows 2000 Professional on 88 computers, and you would like to do it with the least amount of administrative effort.  You have 38 PXE-Compliant computers and 50 NON PXE-Compliant computers ready to go. You confirm that all 88 computers and their hardware are included on the current Windows 2000 hardware compatibility list (HCL).You create an RIS image and load it onto a Windows 2000 RIS Server. You then start the 88 computers. You find that the 38 PXE-Compliant computers connect fine to the RIS server, however the 50 NON PXE-Compliant computers cannot connect to the RIS server.  What should you do to resolve this problem?（）

• A、Run RBFG*EXE to create a Non-PXE-compliant startup disk.
• B、Run RIPREP.*XE to create a non - PXE complaint startup disk.
• C、Grant the ‘Everyone’ group NTFS Read permission for the RIS image.
• D、Grant the Administrators group NTFS Read permission for the RIS image.

第18题：

You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers.  You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals:   An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%.  Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.  Which result or results do these actions produce?（　）

• A、An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
• B、Existing user environments will be maintained on the Windows 2000 Professional computers.
• C、The network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.
• D、The RIS image and the upgraded applications will be enabled as they are added to the N.etwork.

第19题：

You are an administrator of ETECHSOL.COM domain.  You want to install Win2000 Professional on 20 new PXE compliant computers that do not have any operating systems installed on them.  You create a RIS image and load the image onto the RIS server and then start the new computers. You find that the new computers cannot connect to the RIS server. You verify that existing client computers on the network can connect to network servers also.  What should you do? （）

• A、 Create an Active Directory on a server.
• B、 Setup a server to act as a DHCP server.
• C、 Install a Remote Access Server.
• D、 Enable TCP/IP on the client computers.

第20题：

You are the administrator of Company’s network.You install 50 new Windows 2000 Professional computers in the marketing department. Two weeks later,users report that five of the computers have stopped responding. You troubleshoot the five computers.You find that some users have installed unsigned device drivers that are not supported by Windows 2000Professional.You want to determine which drivers were installed by users.What should you do?（）

• A、Run the chkdsk /f command on all drives on the computers.
• B、Configure Windows 2000 Professional to enable driver signing verification.
• C、Run the File Signature Verification tool on the computers.
• D、Run the System File Checker utility on the computers.

第21题：

You are the desktop administrator for your company. You are responsible for automating the deployment of Windows XP Professional to new computers in your company. You are preparing a Windows XP Professional computer, which you will use to test disk imaging. You install Windows XP Professional on the test computer and run the Sysprep utility. You use a third-party software package to create a disk image. You apply the disk image to a new computer and then restart the computer. Instead of completing the Windows XP Professional installation, the computer starts the Windows Welcome program, requiring you to enter additional setup information.  Because you will be deploying a large number of computers, you want to ensure that the disk image can be applied without additional user interaction. What should you do?（） 

• A、Use a network-based RIS server to apply the disk image to new computers. 
• B、On the test computer, run the Sysprep -factory command. Re-create the disk image by using the third-party software. 
• C、Use Setup Manager to create a Sysprep answer file. Copy the answer file to a floppy disk, and insert the disk into new computers when the disk image is applied. 
• D、Create an Unattend.txt answer file. Copy the file to the C:/Winnt/System32 folder on the test computer. Run the Sysprep utility and re-create the disk image by using the third-party software.

第22题：

You want to install Windows 2000 Professional on 30 PXE-compliant computers and 35 non-PXEcompliant computers. All 65 computers are included on the current hardware compatibility list (HCL). You create a RIS image. You load the image on the RIS server. You then start the 65 computers. You find that the 30 PXE-Compliant computers can connect to the RIS server. However, the 35 non-PXE-compliant computers fail to connect to the RIS server.  What should you do?（）

• A、 Run Rbfg.exe to create a Non-PXE-compliant startup disk.
• B、 Run Riprep.exe to create a Non–PXE complaint startup disk.
• C、 Grant the Everyone group NTFS Read permission for the RIS image.
• D、 Grant the Administrators group NTFS Read permission for the RIS image.

第23题：