Which of the following are VLAN frame. encapsulation types that may be configured on a Catalyst switch? (Choose two.)A. VTPB. ISLC. CDPD. 802.1QE. 802.1pF. LLC

题目

Which of the following are VLAN frame. encapsulation types that may be configured on a Catalyst switch? (Choose two.)

A. VTP

B. ISL

C. CDP

D. 802.1Q

E. 802.1p

F. LLC

相似考题

1.Which of following VLAN frame. encapsulation types are configurable on a Cisco switch? (Select two answer choices.)A. VTPB. 802.1QC. LLCD. ISLE. CDPF. PAP

2.A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur? (Choose all that apply).A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.

3.You need to create a new VLAN on your Catalyst switch. This VLAN is to be named EZONEXAM. Which of the following need to be completed for the creation of this new VLAN? (Select all that apply)A. The EZONEXAM VLAN must be created.B. The desired ports must be added to the new EZONEXAM VLAN.C. The EZONEXAM VLAN must be added to all of the domains.D. The EZONEXAM VLAN must be named.E. An IP address must be configured for the EZONEXAM VLAN.F. None of the above. VLAN creations are automatic.

4.Which encapsulation types are configurable on a Cisco switch for a trunk? (Select two answer choices)A. VTPB. ISLC. CDPD. 802.1QE. 802.1pF. LLCG. IETF

更多“Which of the following are VLAN frame. encapsulation types that may be configured on a Catalyst switch? (Choose two.)A. VTPB. ISLC. CDPD. 802.1QE. 802.1pF. LLC”相关问题

  • 第1题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? (Choose two)

    A. The switch must be reachable through a port connected to its management VLAN.

    B. The switch console port must be connected to the Ethernet LAN.

    C. The switch must be fully configured as an SNMP agent.

    D. The switch must be configured with an IP address, subnet mask, and default gateway.

    E. The switch management VLAN must be created and have a membership of at least one switch port.

    F. The switch must be connected to a router over a VLAN trunk.


    正确答案：AD
    A,D 解析：Explanation:
    In order the telnet to any Cisco device, the device must be reachable from the remote location. For a Cisco switch to be reachable from remote locations, it must have an IP address, subnet mask, and default gateway assigned.

    Communication with the switch management interfaces is through the switch IP address.
    The IP address is associated with the management VLAN, which by default is VLAN 1

  • 第2题：

    Catalyst switches utilize a special technology to identify and prevent topology loops and ensure that data flows properly through a single network path. What is the name of this technology?()

    A. VTP

    B. ISL

    C. 802.1Q

    D. STP

    E. None of the above


    参考答案：D

  • 第3题：

    A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur?（）

    A. The switch that will share the VLAN information must be in the VTP Server mode.

    B. The switches must be in the same VTP domain.

    C. The switch that will share the VLAN information must be configured as the root bridge.

    D. The switches must be configured to use the same VTP version.

    E. The switches must be configured to use the same STP version.

    F. The switches must be configured to use the same type of ID tagging.

    G. The switches must be connected over VLAN trunks.


    参考答案：A, B, F

  • 第4题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?()

    A. The TESTKING VLAN must be created.

    B. The desired ports must be added to the new TESTKING VLAN.

    C. The TESTKING VLAN must be added to all of the domains.

    D. The TESTKING VLAN must be named.

    E. An IP address must be configured for the TESTKING VLAN.

    F. None of the above. VLAN creations are automatic.


    参考答案：A, B, D

  • 第5题：

    Which of following VLAN frame encapsulation types are configurable on a Cisco switch?（）

    • A、VTP
    • B、802.1Q
    • C、LLC
    • D、ISL
    • E、CDP
    • F、PAP

    正确答案:B,D

  • 第6题：

    Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?（）

    • A、Switch(config-if)# vlan all
    • B、Switch(config-if)# switchport trunk encapsulation dot1q
    • C、Switch(config-if)# switchport access vlan all
    • D、Switch(config-if)# switchport mode trunk
    • E、Switch(config-if)# switchport access vlan 303

    正确答案:C,D

  • 第7题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第8题：

    Which of the following is not information provided from an IP phone to a Catalyst switch using  CDP？（）

    • A、 device PoE requirements
    • B、 device IP address
    • C、 device voice VLAN ID
    • D、 device platform

    正确答案:C

  • 第9题：

    A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）

    • A、The switch that will share the VLAN information must be in the VTP Server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be configured to use the same VTP version.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must be configured to use the same type of ID tagging.
    • G、The switches must be connected over VLAN trunks.

    正确答案:A,B,F

  • 第10题：

    多选题
    Which of the following are VLAN frame encapsulation types that may be configured on a Catalyst switch?（）
    A

    VTP

    B

    ISL

    C

    CDP

    D

    802.1Q

    E

    802.1p

    F

    LLC


    正确答案： B,E
    解析： 暂无解析

  • 第11题：

    多选题
    Which of following VLAN frame encapsulation types are configurable on a Cisco switch?（）
    A

    VTP

    B

    802.1Q

    C

    LLC

    D

    ISL

    E

    CDP

    F

    PAP


    正确答案： B,F
    解析： 暂无解析

  • 第12题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： C,A
    解析： 暂无解析

  • 第13题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    A. The switch name must match the workgroup name of the local network.

    B. The switch must be configured with an IP address and default gateway.

    C. The remote workstations must have access to the management VLAN of the switch.

    D. CDP must be enabled on the switch so that it can be located by other devices on the network.


    参考答案：B, C

  • 第14题：

    Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?()

    A. Switch(config-if)# vlan all

    B. Switch(config-if)# switchport trunk encapsulation dot1q

    C. Switch(config-if)# switchport access vlan all

    D. Switch(config-if)# switchport mode trunk

    E. Switch(config-if)# switchport access vlan 303


    参考答案：C, D

  • 第15题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network.What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    A. The switch that will share its VLAN configuration must be in VTP server mode.

    B. The switches must be in the same VTP domain.

    C. The switch that will share the VLAN information must be configured as the root bridge.

    D. The switches must be connected over VLAN trunks.

    E. The switches must be configured to use the same STP version.

    F. The switches must have VTP pruning activated.


    参考答案：A, B, D

  • 第16题：

    Which of the following three port types are valid Spanning Tree port types？（Choose the best threeanswers.）（）

    • A、Designated port
    • B、Nonswitch port
    • C、Switch port
    • D、Nonroot port
    • E、Nondesignated port
    • F、Root port

    正确答案:A,E,F

  • 第17题：

    In a RSTP implementation, which of the following two link types are used? （）(Choose two.)

    • A、Shared
    • B、Point-to-Point
    • C、Designated
    • D、Multiaccess non-broadcast

    正确答案:A,B

  • 第18题：

    Which of the following are VLAN frame encapsulation types that may be configured on a Catalyst switch?（）

    • A、VTP
    • B、ISL
    • C、CDP
    • D、802.1Q
    • E、802.1p
    • F、LLC

    正确答案:B,D

  • 第19题：

    Which two types of activities does the Lightweight Access Point Protocol （LWAPP） define？ （Choose two.）（）

    • A、 access point certification and software control
    • B、 compression and Layer 3 address mapping
    • C、 Layer 3 addressing and distribution
    • D、 packet encapsulation， fragmentation， and formatting
    • E、 SNMP monitoring services

    正确答案:A,D

  • 第20题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?（）

    • A、The TESTKING VLAN must be created.
    • B、The desired ports must be added to the new TESTKING VLAN.
    • C、The TESTKING VLAN must be added to all of the domains.
    • D、The TESTKING VLAN must be named.
    • E、An IP address must be configured for the TESTKING VLAN.
    • F、None of the above. VLAN creations are automatic.

    正确答案:A,B,D

  • 第21题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第22题：

    多选题
    Which two types of activities does the Lightweight Access Point Protocol （LWAPP） define？ （Choose two.）（）
    A

    access point certification and software control

    B

    compression and Layer 3 address mapping

    C

    Layer 3 addressing and distribution

    D

    packet encapsulation， fragmentation， and formatting

    E

    SNMP monitoring services


    正确答案： C,E
    解析： 暂无解析

  • 第23题：

    多选题
    Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?（）
    A

    Switch(config-if)# vlan all

    B

    Switch(config-if)# switchport trunk encapsulation dot1q

    C

    Switch(config-if)# switchport access vlan all

    D

    Switch(config-if)# switchport mode trunk

    E

    Switch(config-if)# switchport access vlan 303


    正确答案： E,A
    解析： 暂无解析

相关内容