You have just purchased a brand new router and wish to have the router prompt you through the initial configuration commands. Which router mode does this describe?A．ROM Monitor modeB．SETUP modeC．Autoflash modeD．RXBOOT modeE．None of the above

题目

You have just purchased a brand new router and wish to have the router prompt you through the initial configuration commands. Which router mode does this describe?

A．ROM Monitor mode

B．SETUP mode

C．Autoflash mode

D．RXBOOT mode

E．None of the above

相似考题

1.You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? ()A. set protocols isis inet6B. set routing-options router-id router-idC. set protocols ospf3 area 0 interface allD. set interface fe-0/0/1 unit 0 family inet6E. set routing-options ipv6-router-id router-id

2.A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with:"Would you like to enter the initial configuration dialog? [yes/no]"Why has this occurred?（）A. There is an error in the router DRAM.B. Te IOS image is corrupt.C. The configuration register is set to 0x2142.D. The TFTP server that contains the router configuration file is unreachable.E. A boot system configuration command has placed the router into setup mode.

3.You wish to upgrade the IOS of a router without removing the image currently installed.What command will display the amount of memory that is being used by the current IOS image and whether there is enough room available to hold both the current and new images?（）A. Router# show versionB. Router# show flashC. Router# show memoryD. Router# show buffersE. Router# show running-configF. All of the above

4.Which command prompt indicates that you are in operational mode?()A. user@router&B. user@router#C. user@router%D. user@router>

参考答案和解析
正确答案：B
解析：Explanation:
Setup mode is a convenient mode that walks you through the setup procedure by prompting you with specific questions and options one by one.
更多“You have just purchased a brand new router and wish to have the router prompt you through the initial configuration commands. Which router mode does this describe?A．ROM Monitor modeB．SETUP modeC．Autoflash modeD．RXBOOT modeE．None of the above”相关问题

  • 第1题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    A. Router# copy tftp flash

    B. Router# copy flash run

    C. Router(config)# restore flash

    D. Router(config)# repair flash

    E. Router#copy flash tftp

    F. Router# copy start flash


    参考答案：A

  • 第2题：

    You just purchased a refurbished router that contains a configuration from a previous deployment. What should you do, before entering a new configuration into the router?()

    A. RAM should be erased and the router restarted.

    B. Flash should be erased and the router restarted.

    C. NVRAM should be erased and the router restarted.

    D. The new configuration should be entered and saved.


    参考答案：D

  • 第3题：

    You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? （）

    • A、set protocols isis inet6
    • B、set routing-options router-id router-id
    • C、set protocols ospf3 area 0 interface all
    • D、set interface fe-0/0/1 unit 0 family inet6
    • E、set routing-options ipv6-router-id router-id

    正确答案:B,C

  • 第4题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    • A、Router# copy tftp flash
    • B、Router# copy flash run
    • C、Router(config)# restore flash
    • D、Router(config)# repair flash
    • E、Router#copy flash tftp
    • F、Router# copy start flash

    正确答案:A

  • 第5题：

    You have just purchased a brand new router and wish to have the router prompt you through the initial configuration commands. Which router mode does this describe?（）

    • A、ROM Monitor mode
    • B、SETUP mode
    • C、Autoflash mode
    • D、RXBOOT mode
    • E、None of the above

    正确答案:B

  • 第6题：

    In configuration mode you see the following prompt： [edit interfaces fe-1/1/1] user@router#  Which command will take you to operational mode？（）

    • A、end
    • B、exit
    • C、quit
    • D、exit configuration-mode

    正确答案:D

  • 第7题：

    At which command prompt would you issue the set date command?（）

    • A、[edit chassis]   user@router#
    • B、[edit]   user@router#
    • C、[edit system]   user@router#
    • D、user@router>

    正确答案:D

  • 第8题：

    You wish to upgrade the IOS of a router without removing the image currently installed.What command will display the amount of memory that is being used by the current IOS image and whether there is enough room available to hold both the current and new images?（）

    • A、Router# show version
    • B、Router# show flash
    • C、Router# show memory
    • D、Router# show buffers
    • E、Router# show running-config
    • F、All of the above

    正确答案:B

  • 第9题：

    How can you verify that you have correctly configured SSH access to your Junos device?（）

    • A、user@router# show system services
    • B、user@router> show configuration services
    • C、user@router# show configuration system services
    • D、user@router# show system login

    正确答案:A

  • 第10题：

    多选题
    A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change?（）
    A

    The IOS image will be ignored.

    B

    The router will prompt to enter initial configuration mode.

    C

    The router will boot to ROM.

    D

    Any configuration entries in NVRAM will be ignored.

    E

    The configuration in flash memory will be booted.


    正确答案： A,D
    解析： 暂无解析

  • 第11题：

    单选题
    Which command prompt indicates that you are in operational mode?（）
    A

    user@router&

    B

    user@router#

    C

    user@router%

    D

    user@router>


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?（）
    A

    No additional steps are required. 

    B

    Add the appropriate source-interface command. 

    C

    The router cannot access a server in the Enterprise Campus network. 

    D

    The Teleworker Router does not have any client applications; therefore this type of request is not possible.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    After working all night and successfully configuring a Cisco router for the TestKing network you save your changes on the startup config, reboot the router, and go out for a cigarette. When you return, none of your changes are active and the router boots to the initial configuration mode!Which of the choices below indicates the source of your problem?（）

    A. Hardware failure in NVRAM prevents the router from loading the config

    B. Startup-config in flash is corrupt and cannot be analyzed

    C. Router configuration-register set to bypass startup configuration

    D. Startup-config in NVRAM is corrupt and cannot be analyzed

    E. None of the above


    参考答案：C

  • 第14题：

    A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change?()

    A. The IOS image will be ignored.

    B. The router will prompt to enter initial configuration mode.

    C. The router will boot to ROM.

    D. Any configuration entries in NVRAM will be ignored.

    E. The configuration in flash memory will be booted.


    参考答案：B, D

  • 第15题：

    A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?（）

    • A、No additional steps are required. 
    • B、Add the appropriate source-interface command. 
    • C、The router cannot access a server in the Enterprise Campus network. 
    • D、The Teleworker Router does not have any client applications; therefore this type of request is not possible.

    正确答案:B

  • 第16题：

    A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change?（）

    • A、The IOS image will be ignored.
    • B、The router will prompt to enter initial configuration mode.
    • C、The router will boot to ROM.
    • D、Any configuration entries in NVRAM will be ignored.
    • E、The configuration in flash memory will be booted.

    正确答案:B,D

  • 第17题：

    After working all night and successfully configuring a Cisco router for the TestKing network you save your changes on the startup config, reboot the router, and go out for a cigarette. When you return, none of your changes are active and the router boots to the initial configuration mode! Which of the choices below indicates the source of your problem?（）

    • A、Hardware failure in NVRAM prevents the router from loading the config
    • B、Startup-config in flash is corrupt and cannot be analyzed
    • C、Router configuration-register set to bypass startup configuration
    • D、Startup-config in NVRAM is corrupt and cannot be analyzed
    • E、None of the above

    正确答案:C

  • 第18题：

    Which command prompt indicates that you are in operational mode?（）

    • A、user@router&
    • B、user@router#
    • C、user@router%
    • D、user@router>

    正确答案:D

  • 第19题：

    You just purchased a refurbished router that contains a configuration from a previous deployment. What should you do, before entering a new configuration into the router?（）

    • A、RAM should be erased and the router restarted.
    • B、Flash should be erased and the router restarted.
    • C、NVRAM should be erased and the router restarted.
    • D、The new configuration should be entered and saved.

    正确答案:D

  • 第20题：

    You have been asked to create a static route with a next hop that is not directly connected to the router.Which configuration parameter enables the static route to accomplish this scenario?（）

    • A、resolve
    • B、indirect
    • C、next-hop
    • D、recursive

    正确答案:A

  • 第21题：

    单选题
    After working all night and successfully configuring a Cisco router for the TestKing network you save your changes on the startup config, reboot the router, and go out for a cigarette. When you return, none of your changes are active and the router boots to the initial configuration mode! Which of the choices below indicates the source of your problem?（）
    A

    Hardware failure in NVRAM prevents the router from loading the config

    B

    Startup-config in flash is corrupt and cannot be analyzed

    C

    Router configuration-register set to bypass startup configuration

    D

    Startup-config in NVRAM is corrupt and cannot be analyzed

    E

    None of the above


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    At which command prompt would you issue the set date command?（）
    A

    [edit chassis]   user@router#

    B

    [edit]   user@router#

    C

    [edit system]   user@router#

    D

    user@router>


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    You have just purchased a brand new router and wish to have the router prompt you through the initial configuration commands. Which router mode does this describe?（）
    A

    ROM Monitor mode

    B

    SETUP mode

    C

    Autoflash mode

    D

    RXBOOT mode

    E

    None of the above


    正确答案： C
    解析： 暂无解析

相关内容