You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into router VE1 locally using a terminal emulation program such as HyperTerminal.A. Connect the PC's COM port to the router's console port using a straigh

题目

You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into router VE1 locally using a terminal emulation program such as HyperTerminal.

A. Connect the PC's COM port to the router's console port using a straight-through cable.

B. Connect the PC's COM port to the router's console port using a rollover cable.

C. Connect the PC's COM port to the router's Ethernet port using a straight-through cable.

D. Connect the PC's Ethernet port to the router's Ethernet port using a rollover cable.

E. Connect the PC's Ethernet port to the router's Ethernet port using a straight- through cable.

F. None of the above

相似考题

1.You are trying to connect directly into the LAN prot of a Ezonexam router. You want to telnet to the local Cisco router using TCP/IP but cannot create a session.What should you do to resolve the problem?A. Use a straight-through cable to connect your computer's COM port to the router's console port.B. Use a crossover cable to connect your computer's COM port to the router's console port.C. Use a straight-through cable to connect your computer's COM port to the router's Ethernet port.D. Use a crossover cable to connect your computer's Ethernet port to the router's Ethernet port.E. Use a rollover cable to connect your computer's Ethernet port to the router's Ethernet port.F. Use a straight-through cable to connect your computer's Ethernet port to the router's Ethernet port.G. None of the above

2.An administrator is using a protocol analyzer to monitor traffic between two servers. However, theonly traffic that appears is broadcast and traffic originating from the administrator‘s PC.Which of the following devices is the administrator plugged into? （）A.HubB. BridgeC. SwitchD. Router

3.After connecting a PC to an available port on a switch, you find that the PC can not access any of the resources on the LAN. No other PC's connected to the switch appear to be having any issues. What is the most likely cause for this problem?A．The router lacks a routing table entry for the new hostB．The host switch port is assigned to the incorrect VLANC．The host MAC address is incorrectly configuredD．A STP instance for the new host has not been initializedE．The switch does not have the MAC address hard coded in the CAM table.

4.Which type of cable is required to access the router’s console port from a PC?()A.modemB.EthernetC.nullmodemD.straight-through

更多“You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into router VE1 locally using a terminal emulation program such as HyperTerminal.A. Connect the PC's COM port to the router's console port using a straigh”相关问题

  • 第1题：

    You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter.Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.You need to configure the wireless connection to allow your computer to discover other computers.What should you do?（）

    A.A

    B.B

    C.C

    D.D


    参考答案：A

  • 第2题：

    You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into the router locally using a terminal emulation program such as HyperTerminal.()

    A. Connect the PC‘s COM port to the router‘s console port using a straight-through cable.

    B. Connect the PC‘s COM port to the router‘s console port using a rollover cable.

    C. Connect the PC‘s COM port to the router‘s ethernet port using a straight-through cable.

    D. Connect the PC‘s ethernet port to the router‘s ethernet port using a rollover cable.

    E. Connect the PC‘s ethernet port to the router‘s ethernet port using a straight- through cable.


    参考答案：B

  • 第3题：

    Which type of cable is used to connect the COM port of a host to the COM port of a router or switch?()

    A. crossover

    B. straight-through

    C. rolled

    D. shielded twisted-pair


    参考答案：C

  • 第4题：

    A router has two FastEthernet interfaces and needs to connect to four vlans in the local network.How can you accomplish this task，using the fewest physical interfaces and without decreasing networkper formance？（）

    A.Add two more FastEthernet interfaces.

    B.Add a second router to handle the vlan traffic.

    C.Use a hub to connect the four vlans with a FastEthernet interface on router.

    D.Implement a router-on-a-stick configuration.


    参考答案：D

  • 第5题：

    Which two statements about configuration an unconnected Catalyst Express 500 switch from setup mode using a PC are true？（）

    • A、You may use Cisco Network Assistant to set up the initial configuration
    • B、You must use CLI for initial configuration
    • C、You may use either CLI or CAN for configuration
    • D、You may make a direct connection to the PC from any point on the switch
    • E、You may only make a direct connection from the port with the flashing green LED to the PC

    正确答案:A,E

  • 第6题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）

    • A、The border router is using a proper seed metric for OSPF
    • B、The border router is using a proper seed metric for EIGRP
    • C、The administrative distance is set for OSPF and EIGRP
    • D、The missing OSPF routes are present in the routing  table of the border router
    • E、The subnet keyword on the border router in the redistribute OSPF command

    正确答案:D

  • 第7题：

    An administrator is using a protocol analyzer to monitor traffic between two servers. However, the only traffic that appears is broadcast and traffic originating from the administrator's PC. Which of the following devices is the administrator plugged into? （）

    • A、Hub
    • B、Bridge
    • C、Switch
    • D、Router

    正确答案:C

  • 第8题：

    Your company named Contoso， Ltd. has a two-node Network Load Balancing cluster. The cluster is intended to provide high availability and load balancing for only the intranet Web site. The name of the cluster is web.contoso.com.  You discover that Contoso users can see the Network Load Balancing cluster in the network neighborhood and can connect to various services by using the web.contoso.com name. The web.contoso.com Network Load Balancing cluster is configured with only one port rule.  You need to configure the web.contoso.com Network Load Balancing cluster to accept only HTTP traffic. Which two actions should you perform？（）

    • A、Log on to one of the cluster nodes and run the wlbs disable all command.
    • B、Open the Network Load Balancing Clusters console and delete the default port rules.
    • C、Open the Network Load Balancing Clusters console and create a new Allow rule for TCP port 80.
    • D、Open the Network Load Balancing Clusters console and change the default port rule to a disabled port range rule.

    正确答案:B,C

  • 第9题：

    You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.  You need to configure the wireless connection to allow your computer to discover other computers.  What should you do？（）

    • A、Configure the network category of your wireless network connection to Private.
    • B、Configure the network category of your wireless network connection to Public.
    • C、Configure the TCP/IP packet filtering on the wireless network connection.
    • D、Configure the wireless network connection with the appropriate authentication to the router.

    正确答案:A

  • 第10题：

    You are the administrator of a Windows 2000 Professional computer， which has a 56 Kbps modem， connected to itself. You want the users on your company’s network to be able to connect to the Internet using your computer. But， you do not want to allow any other operations than HTTP and FTP. Which ports will you allow through this connection？ （）

    • A、Port 80
    • B、Port 21
    • C、Port 25
    • D、Port 81

    正确答案:A,B

  • 第11题：

    多选题
    Your company named Contoso， Ltd. has a two-node Network Load Balancing cluster. The cluster is intended to provide high availability and load balancing for only the intranet Web site. The name of the cluster is web.contoso.com.  You discover that Contoso users can see the Network Load Balancing cluster in the network neighborhood and can connect to various services by using the web.contoso.com name. The web.contoso.com Network Load Balancing cluster is configured with only one port rule.  You need to configure the web.contoso.com Network Load Balancing cluster to accept only HTTP traffic. Which two actions should you perform？（）
    A

    Log on to one of the cluster nodes and run the wlbs disable all command.

    B

    Open the Network Load Balancing Clusters console and delete the default port rules.

    C

    Open the Network Load Balancing Clusters console and create a new Allow rule for TCP port 80.

    D

    Open the Network Load Balancing Clusters console and change the default port rule to a disabled port range rule.


    正确答案： C,A
    解析： 暂无解析

  • 第12题：

    多选题
    Your company named Contoso， Ltd. has a two-node Network Load Balancing cluster. The cluster isintended to provide high availability and load balancing for only the intranet Web site. The name of the cluster is web.contoso.com. You discover that Contoso users can see the Network Load Balancingcluster in the network neighborhood and can connect to various services by using the web.contoso.comname. The web.contoso.com Network Load Balancing cluster is configured with only one port rule. Youneed to configure the web.contoso.com Network Load Balancing cluster to accept only HTTP traffic. Which two actions should you perform？（）
    A

    Log on to one of the cluster nodes and run the wlbs disable all command.

    B

    Open the Network Load Balancing Clusters console and delete the default port rules.

    C

    Open the Network Load Balancing Clusters console and create a new Allow rule for TCP port 80.

    D

    Open the Network Load Balancing Clusters console and change the default port rule to a disabled port range rule.


    正确答案： A,D
    解析： 暂无解析

  • 第13题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes.What should you verify to troubleshoot this problem?（）

    A. The border router is using a proper seed metric for OSPF

    B. The border router is using a proper seed metric for EIGRP

    C. The administrative distance is set for OSPF and EIGRP

    D. The missing OSPF routes are present in the routing table of the border router

    E. The subnet keyword on the border router in the redistribute OSPF command


    参考答案：D

  • 第14题：

    At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）

    A. a serial cable with a V.35 to RJ45 adapter

    B. a CSU/DSU

    C. an external ISDN TA and NT1

    D. The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.


    参考答案：C

  • 第15题：

    Refer to the diagram. Which three statements describe the router port configuration and the switch port configuration as shown in the topology? ()

    A.The Router1 WAN port is configured as a trunking port.

    B.The Router1 port connected to Switch1 is configured using subinterfaces.

    C.The Router1 port connected to Switch1 is configured as 10 Mbps.

    D.The Switch1 port connected to Router1 is configured as a trunking port.

    E.The Switch1 port connected to Host B is configured as an access port.

    F.The Switch1 port connected to Hub1 is configured as full duplex.


    参考答案：B, D, E

  • 第16题：

    You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into the router locally using a terminal emulation program such as HyperTerminal.（）

    • A、Connect the PC's COM port to the router's console port using a straight-through cable.
    • B、Connect the PC's COM port to the router's console port using a rollover cable.
    • C、Connect the PC's COM port to the router's ethernet port using a straight-through cable.
    • D、Connect the PC's ethernet port to the router's ethernet port using a rollover cable.
    • E、Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.

    正确答案:B

  • 第17题：

    Which type of cable is used to connect the COM port of a host to the COM port of a router or switch?（）

    • A、crossover
    • B、straight-through
    • C、rolled
    • D、shielded twisted-pair

    正确答案:C

  • 第18题：

    At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）

    • A、a serial cable with a V.35 to RJ45 adapter
    • B、a CSU/DSU
    • C、an external ISDN TA and NT1
    • D、The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.

    正确答案:C

  • 第19题：

    You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.the Company.com contains an exchange server 2010 server named -ex10 that has imap4 installed.The users of .com use imap4 via the internet to connect to -ex10.you have received instructions from the cio to make sure that the can use -ex10 to connect to the internet.What should you do？（）

    • A、you should consider running the test-imapconnectivity cmdlet from -ex10.
    • B、You should consider using Telnet to connect to TCP port 587 from a client computer.
    • C、You should consider using Telnet to connect to TCP port 143 from a client computer.
    • D、you should consider running the test-outlookconnectivity cmdlet from -ex10.

    正确答案:B

  • 第20题：

    Your company named Contoso， Ltd. has a two-node Network Load Balancing cluster. The cluster isintended to provide high availability and load balancing for only the intranet Web site. The name of the cluster is web.contoso.com. You discover that Contoso users can see the Network Load Balancingcluster in the network neighborhood and can connect to various services by using the web.contoso.comname. The web.contoso.com Network Load Balancing cluster is configured with only one port rule. Youneed to configure the web.contoso.com Network Load Balancing cluster to accept only HTTP traffic. Which two actions should you perform？（）

    • A、Log on to one of the cluster nodes and run the wlbs disable all command.
    • B、Open the Network Load Balancing Clusters console and delete the default port rules.
    • C、Open the Network Load Balancing Clusters console and create a new Allow rule for TCP port 80.
    • D、Open the Network Load Balancing Clusters console and change the default port rule to a disabled port range rule.

    正确答案:B,C

  • 第21题：

    Certkiller .com boosts a two-node Network Load Balancing cluster which is called web. CK1 .com. The purpose of this cluster is to provide load balancing and high availability of the intranet website only. With monitoring the cluster， you discover that the users can view the Network Load Balancing cluster in their Network Neighborhood and they can use it to connect to various services by using the name web. CK1 .com.  You also discover that there is only one port rule configured for Network Load Balancing cluster.  You have to configure web. CK1 .com NLB cluster to accept HTTP traffic only.  Which two actions should you perform to achieve this objective（）

    • A、Create a new rule for TCP port 80 by using the Network Load Balancing Cluster console
    • B、Run the wlbs disable command on the cluster nodes
    • C、Assign a unique port rule for NLB cluster by using the NLB Cluster console
    • D、Delete the default port rules through Network Load Balancing Cluster console

    正确答案:A,D

  • 第22题：

    单选题
    You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into the router locally using a terminal emulation program such as HyperTerminal.（）
    A

    Connect the PC's COM port to the router's console port using a straight-through cable.

    B

    Connect the PC's COM port to the router's console port using a rollover cable.

    C

    Connect the PC's COM port to the router's ethernet port using a straight-through cable.

    D

    Connect the PC's ethernet port to the router's ethernet port using a rollover cable.

    E

    Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）
    A

    The border router is using a proper seed metric for OSPF

    B

    The border router is using a proper seed metric for EIGRP

    C

    The administrative distance is set for OSPF and EIGRP

    D

    The missing OSPF routes are present in the routing  table of the border router

    E

    The subnet keyword on the border router in the redistribute OSPF command


    正确答案： E
    解析： 暂无解析

相关内容