A typical peripheral device has an address which the processor uses to select the device's internal(74)．A．dataB．controlsC．signalsD．registers

题目

A typical peripheral device has an address which the processor uses to select the device's internal(74)．

A．data

B．controls

C．signals

D．registers

相似考题

1.A typical peripheral device has ______ which the processor uses to select the device's internal registers.A．dataB．a controlC．a signalD．an address

2.Which two methods are used to assign an IP address to a WX device? ()(Choose two.)A. SSHB. TelnetC. WebViewD. device front panelE. serial console (command-line interface)

3.In a PPP over ATM service offering,which two methods are available for dynamically allocating an IP address to the customer's device?()A.DHCPB.RADIUS serverC.local address poolsD.static IP assignmen

4.You configure an HP Jet Direct print device as sown in the Network Diagram exhibit.You want to create and share a printer at Srv2.sales.justtogs.com that is connected to the TCP/IP port of the print device. However, when you enter the IP address of the device, you receive the dialog box shown in thePrinterPortWizard exhibit.PrinterPortWizardWhat should you do?A．Select Hewlett Packard JetDirect from the Standard drop-down list.B．Select the Custom option button, click the Settings command button, and select the LPR protocol.C．Change the IP address of the print device to 10.5.20.200.D．Change the subnet mask of the print device to 255.0.0.0.E．Change the default gateway address on Srv2.sales.justtogs.com to 10.5.20.100.

更多“A typical peripheral device has an address which the processor uses to select the device's ”相关问题

  • 第1题：

    A typical peripheral device has(66)which the processor uses to select the device's internal registers.

    A．data

    B．a control

    C．a signal

    D．an address


    正确答案：D
    解析：译文：通常的外围设备都有一个地址，处理器根据它来选择设备内部的寄存器。

  • 第2题：

    Which two of these are characteristics of an IPS device？（）

    • A、 passively listens to network traffic
    • B、 is an active device in the traffic path
    • C、 has a permissive interface that is used to monitor networks
    • D、 traffic arrives on one IPS interface and exits on another

    正确答案:B,D

  • 第3题：

    You suspect that a hacker may be performing a MAC address flooding attack somewhere within the    network.  Which description correctly describes a MAC address flooding attack？（）

    • A、The attacking device spoofs a source MAC address of a valid host currently in the CAM table. The switch then forwards frames destined for the valid host to the attacking device.
    • B、Frames with unique， invalid destination MAC addresses flood the switch and exhaust CAM table space. The result is that new entries cannot be inserted because of the exhausted CAM table space， and traffic is subsequently flooded out all ports.
    • C、The attacking device crafts ARP replies intended for valid hosts. The MAC address of the attacking device then becomes the destination address found in the Layer 2 frames sent by the valid network device.
    • D、The attacking device crafts ARP replies intended for valid hosts. The MAC address of the attacking device then becomes the source address found in the Layer 2 frames sent by the valid network device.
    • E、The attacking device spoofs a destination MAC address of a valid host currently in the CAM table. The switch then forwards frames destined for the valid host to the attacking device.
    • F、Frames with unique， invalid source MAC addresses flood the switch and exhaust CAM table space. The result is that new entries cannot be inserted because of the exhausted CAM table space， and traffic is subsequently flooded out all ports.
    • G、None of the other alternatives apply

    正确答案:F

  • 第4题：

    Which layer of the OSI reference model uses the hardware address of a device to ensure message delivery to the proper host on a LAN?（）

    • A、physical
    • B、data link
    • C、network
    • D、transport

    正确答案:B

  • 第5题：

    A user is attempting to access a website but is getting a ‘Page cannot be displayed’ error. The technician checks the IP address of the computer and sees that it has been assigned 169.254.10.70. Which of the following is the MOST likely cause?（）

    • A、The device is located behind a firewall.
    • B、The network card is disabled.
    • C、The device is not configured for DHCP.
    • D、The device cannot locate a DHCP server.

    正确答案:D

  • 第6题：

    Which two methods are used to assign an IP address to a WX device? （）(Choose two.)

    • A、SSH
    • B、Telnet
    • C、WebView
    • D、device front panel
    • E、serial console (command-line interface)

    正确答案:D,E

  • 第7题：

    单选题
    Which of the following processes, is used to find the hardware address of a LAN device?（）
    A

    Inverse-ARP

    B

    Reverse-ARP

    C

    Proxy ARP

    D

    ARP


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    Which of below device has the maximum coverage range（）
    A

    AIS

    B

    Radar

    C

    VHF

    D

    LRIT


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    One user has a Video Capture Card installed on her pc. She uses it to capture video pictures.  She complains the video capture card is not working properly and she couldn't view captured video. You check out the Device manager, which does not indicate any Video devices installed on your system, but you see a yellow mark placed besides the audio device. What should you do in order to make the video capture device work? （）
    A

    Enable the device in Device manager 

    B

    Install new driver from Device Manager 

    C

    Disable PNP and install manually 

    D

    Copy the manufacturer's driver to WINNT/driver cache/i386/ and then let Windows 2000 to install the device.


    正确答案： B
    解析： The yellow mark indicates that system has detected the newly installed device but was unable to install the proper driver for that device. So you should install the new driver from the device manager.  Red mark placed beside any hardware device indicates that the device has been disabled.  If you will disable the plug and play feature then there may be some confliction in the hardware resources.  Choice “Copy the manufacturer’s driver to WINNT/driver cache/i386/ and then let Windows 2000 to install the device.“ is not a proper and correct way to install the hardware device driver.

  • 第10题：

    多选题
    Which of the following is a bus mastering method?（）
    A

    A device transfers data directly to the memory.

    B

    A device handles mediation between the northbridge and the processor.

    C

    A device connects to another device without involving the processor.

    D

    A device transfers data to the processor and then on to the memory.

    E

    A device handles mediation between the southbridge and the processor


    正确答案： A,C
    解析： 暂无解析

  • 第11题：

    单选题
    A user is attempting to access a website but is getting a ‘Page cannot be displayed’ error. The technician checks the IP address of the computer and sees that it has been assigned 169.254.10.70. Which of the following is the MOST likely cause?（）
    A

    The device is located behind a firewall.

    B

    The network card is disabled.

    C

    The device is not configured for DHCP.

    D

    The device cannot locate a DHCP server.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    When using Device Manager, a red ‘X” indicates which of the following?（）
    A

    Device is disabled

    B

    Device conflict

    C

    No device driver found

    D

    Device has not been digitally signed


    正确答案： A
    解析： 暂无解析

  • 第13题：

    is not a peripheral component or device. The basic input device on a small computer is a(71).

    A．Digital Camera

    B．Printer

    C．Mouse

    D．Driver


    正确答案：D
    解析：四个选项分别是数码相机、打印机、鼠标和驱动器，只有D不属于计算机外部设备。

  • 第14题：

    You have configured the Odyssey Access Client with a profile which has the "Disable Server Verification" setting cleared.What will be the result if the device certificate on the MAG Series device has expired and the user attempts to authenticate?（）

    • A、The user will be instructed to call the network administrator.
    • B、The user will fail authentication.
    • C、The user will be prompted to install a new device certificate on the MAG Series device.
    • D、The user will successfully authenticate and have full network access.

    正确答案:B

  • 第15题：

    On the WLSE or WLSE Express， which of the following criteria for applying automanaged configurations can be combined？（）

    • A、device type and subnet
    • B、MAC address and device type
    • C、serial number and version number
    • D、serial number and subnet

    正确答案:A

  • 第16题：

    When using Device Manager, a red ‘X” indicates which of the following?（）

    • A、Device is disabled
    • B、Device conflict
    • C、No device driver found
    • D、Device has not been digitally signed

    正确答案:A

  • 第17题：

    Which of the following is a bus mastering method？（）

    • A、 A device transfers data directly to the memory.
    • B、 A device handles mediation between the northbridge and the processor.
    • C、 A device connects to another device without involving the processor.
    • D、 A device transfers data to the processor and then on to the memory.
    • E、 A device handles mediation between the southbridge and the processor.

    正确答案:A,C

  • 第18题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）

    • A、Connect to Windows Update and install all driver updates.
    • B、From the properties of the device, select Roll Back Driver.
    • C、From Device Manager, uninstall the device and then restart the server.
    • D、From Device Manager, disable the device and then click Scan for hardware changes.

    正确答案:B

  • 第19题：

    多选题
    Which three situations will trigger an e-mail to be flagged as spam if a branch SRX Series device has been properly configured with antispam inspection enabled for the appropriate security policy? （）(Choose three.)
    A

    The server sending the e-mail to the SRX Series device is a known open SMTP relay.

    B

    The server sending the e-mail to the SRX Series device is running unknown SMTP server software.

    C

    The server sending the e-mail to the SRX Series device is on an IP address range that is known to be dynamically assigned.

    D

    The e-mail that the server is sending to the SRX Series device has a virus in its attachment.

    E

    The server sending the e-mail to the SRX Series device is a known spammer IP address.


    正确答案： B,A
    解析： 暂无解析

  • 第20题：

    单选题
    Which layer of the OSI reference model uses the hardware address of a device to ensure message delivery to the proper host on a LAN?（）
    A

    physical

    B

    datalink

    C

    network

    D

    transport


    正确答案： B
    解析： 暂无解析

  • 第21题：

    多选题
    Which three statements are typical characteristics of VLAN arrangements?（）
    A

    A new switch has no VLANs configured.

    B

    Connectivity between VLANs requires a Layer 3 device.

    C

    VLANs typically decrease the number of collision domains.

    D

    Each VLAN uses a separate address space.

    E

    A switch maintains a separate bridging table for each VLAN.

    F

    VLANs cannot span multiple switches.


    正确答案： F,E
    解析： 暂无解析

  • 第22题：

    多选题
    In a PPP over ATM service offering,which two methods are available for dynamically allocating an IP address to the customer's device?（）
    A

    DHCP

    B

    RADIUS server

    C

    local address pools

    D

    static IP assignmen


    正确答案： C,A
    解析： 暂无解析

  • 第23题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）
    A

    Connect to Windows Update and install all driver updates.

    B

    From the properties of the device, select Roll Back Driver.

    C

    From Device Manager, uninstall the device and then restart the server.

    D

    From Device Manager, disable the device and then click Scan for hardware changes.


    正确答案： C
    解析： 暂无解析

相关内容