As they access the corporate network, mobile and remote users inadvertently can infect the network with(72) and worms acquired from unprotected public networks.A．virusesB．diseaseC．germsD．sickness

题目

As they access the corporate network, mobile and remote users inadvertently can infect the network with(72) and worms acquired from unprotected public networks.

A．viruses

B．disease

C．germs

D．sickness

相似考题

1.The rain will ________ our plan for a picnic.A.affectB.influenceC.effectD.infect

2.Which set of configuration commands configures MBGP on the ERX Edge Router?()A. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 next-hop-selfB. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family vpnv4 multicast neighbor 192.168.10.1 activateC. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 unicast neighbor 192.168.10.1 activeD. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 activate

3.Which configuration command establishes an EBGP session to a peer in AS 300?()A. neighbor 200.16.1.2 remote-as 300B. bgp-neighbor 200.16.1.2 remote-as 300C. ebgp-neighbor 200.16.1.2 remote-as 300D. neighbor 200.16.1.2 remote-as 300 connection-type ebgp

4.取得客户端的IP地址的方法是 ：A.Request.servervariables("REMOTE_ADDR")B.Request.servervariables("REMOTE_IP")C.Request.servervariables("REMOTE_ADDR ")D.Request.servervariables("REMOTE_IP ")

更多“As they access the corporate network, mobile and remote users inadvertently can infect the ”相关问题

  • 第1题：

    RouterR－1isconfiguredforBGProutingasshownbelow:routerbgp65300network27.0.0.0neighbor192.23.1.1remote－as65300FromtheperspectiveofrouterR－1,whatkindofrouteristherouterwithIPaddress192.23.1.1?()

    A.ApeerrouterrunningIBGP

    B.ApeerrouterrunningEBGP

    C.AcommunitymemberrunningIBGP

    D.ApeergroupmemberrunningIBGP

    E.ApeergroupmemberrunningEBGP


    参考答案：A

  • 第2题：

    Followingticketconsistsofaproblemdescriptionandexistingconfigurationonthedevice.

    Figure1

    Figure2

    TroubleTicketStatement

    Client1isnotabletoreachtheWebServer.InitialtroubleshootingshowsthatDSW1canpingtheFa0/1interfaceofR4butnotthes0/0/0/0.34interface.

    ConfigurationonDSW1

    routereigrp10

    network10.1.4.40.0.0.0

    network10.2.1.10.0.0.0

    network10.2.4.130.0.0.0

    noauto-summary

    ConfigurationonDSW2

    routereigrp10

    network10.1.4.80.0.0.0

    network10.2.2.10.0.0.0

    network10.2.4.140.0.0.0

    noauto-summary

    ConfigurationonR4

    routereigrp10

    network10.1.4.50.0.0.0

    noauto-summary

    redistributeospf1metric1001025511500route-mapEIGRP_to_OSPF!

    routerospf1

    network10.1.1.80.0.0.0area34

    redistributeeigrp10subnets!

    route-mapEIGRP→OSPF

    matchipaddress1!

    access-list1permit10.0.0.00.255.255.255

    access-list1permit209.0.0.00.255.255.255

    Whatisthesolutionofthefaultcondition？（）


    参考答案：B

  • 第3题：

    Today it is common to access the Internet from a variety of ______ devices like smartphones and tablets.

    A.mobilE.B.movE.C.moving
    D.shift

    答案：A
    解析：

  • 第4题：

    ABGProuterisconfiguredasshownbelow：interfaceethernet0ipaddress10.10.10.1255.255.0.0!intserial0ipaddress172.16.1.1255.255.255.252!routerbgp65001neighbor192.168.1.1remote-as65002Basedontheaboveconfiguration，whichofthefollowingBGPstatementswouldinjectthe10.10.0.0/16prefixintotheBGProutingtable？（）

    A.network10.0.0.0

    B.network10.10.0.0mask255.255.0.0

    C.network10.10.10.1mask255.255.255.255

    D.network10.10.10.0mask255.255.255.0

    E.network10.0.0.0mask255.255.0.0


    参考答案：B

  • 第5题：

    This graphic shows the results of an attempt to open a Telnet connection to router ACCESS1 from router Remote27. Which of the following command sequences will correct this problem? ()

    A. ACCESS1(config)# line console 0 ACCESS1(config-line)# password cisco

    B. Remote27(config)# line console 0 Remote27(config-line)# login Remote27(config-line)# password cisco

    C. ACCESS1(config)# line vty 0 4 ACCESS1(config-line)# login ACCESS1(config-line)# password cisco

    D. Remote27(config)# line vty 0 4 Remote27(config-line)# login Remote27(config-line)# password cisco

    E. ACCESS1(config)# enable password cisco

    F. Remote27(config)# enable password cisco


    参考答案：C

  • 第6题：

    We have already covered the topic of network addresses. The first（71） in a block (in classes A,B,and C) defines the network address. In classes A,B,and C,if the hostid is all ls, the address is called a direct broadcast address. It is used by a.（72） to send a packet to all hosts in a specific network. All hosts will accept a packet having this type of destination address. Note that this address can be used only as a （）address in an lP packet. Note also that this special address also reduces the number of available hostid for each netid in classes A,B,and C.
    In classes A,B,and C,an address with all Is for the netid and hostid (32 bits) defines a（74） address in the current network.A host that wants to send a message to every other host can use this address as a destination address in an IP packet. However,a router will block a packet having this type ofaddress to confine the broadcasting to the （75） network. Note that this address belongs to class E.

    A.source
    B.destination
    C.local
    D.remote

    答案：B
    解析：

相关内容