There are three IS-IS routers on a Gigabit Ethernet segment: Router A, Router B, and Router C. Each router is configured in the same area and each routers Gigabit Ethernet interface is configured for Level 1-only. Router A is the Designated Intermediate S

题目

There are three IS-IS routers on a Gigabit Ethernet segment: Router A, Router B, and Router C. Each router is configured in the same area and each routers Gigabit Ethernet interface is configured for Level 1-only. Router A is the Designated Intermediate System (DIS). Each routers IP address on that segment is:Router A: 10.1.1.1/24Router B: 10.1.1.2/24Router C: 10.2.2.1/26Which statement is true about all the adjacencies that exist on that LAN?（）

A. No routers are adjacent with each other.

B. Only Router A and Router B are adjacent at Level 1.

C. Only Router A and Router B are adjacent at Level 2.

D. All three routers are adjacent with each other at Level 1.

相似考题

1.下面列出了路由器的各种命令状态，可以配置路由器全局参数的是(52)。A．router＞B．route#C．router(config)#D．router(config-if)#

2.You are troubleshooting a routing issue and need to check the hop－by－hop path to the 10.10.10.10 destination. Which three commands would display the path?()A. user@router# traceroute 10.10.10.10B. user@router> ping record-route 10.10.10.10C. user@router>traceroute 10.10.10.10D. user@router# run traceroute 10.10.10.10E. user@router# ping record-route 10.10.10.10

3.Which command will display all the EIGRP feasible successor routes known to a router?()A. Router# show ip eigrp routes *B. Router# show ip eigrp summaryC. Router# show ip eigrp topologyD. Router# show ip eigrp adjacenciesE. Router# show ip eigrp neighbors detail

4.能配置IP地址的提示符是（）A.Router>B.RouterC.Router(config-if-Ethernet0)D.Router(config)

参考答案和解析
参考答案：B
更多“There are three IS－IS routers on a Gigabit Ethernet segment: Router A, Router B, and Route ”相关问题

  • 第1题：

    Which of the following commands will display the name of the IOS image file being used in a Cisco router?()

    A. Router# show IOS

    B. Router# show version

    C. Router# show image

    D. Router# show protocols

    E. Router# show flash


    参考答案：B, E

  • 第2题：

    WhenconfiguringMulticastVPN(MVPN)overanMPLScore,boththeDefaultandDataMDTisconfiguredunderwhichconfigurationmode?()

    A.router（config）#

    B.router（config-if）#

    C.router（config-vrf）#

    D.router（config-router）#

    E.router（config-router-af）#


    参考答案：C

  • 第3题：

    哪条 IPv6 静态路由将作为通过 OSPF 学习的动态路由的备份路由？

    A．Router1(config)# ipv6 route 2001:db8:acad:1::/32 2001:db8:acad:6::2 100

    B．Router1(config)# ipv6 route 2001:db8:acad:1::/32 2001:db8:acad:6::100

    C．Router1(config)# ipv6 route 2001:db8:acad:1::/32 2001:db8:acad:6::2 200

    D．Router1(config)# ipv6 route 2001:db8:acad:1::/32 gigabitethernet0/0 2001:db8:acad:6::100 100


    Router1(config)# ipv6 route 2001:db8:acad:1::/32 2001:db8:acad:6::2 200

  • 第4题：

    Which of the following commands would you use, to configure a default route to any destination NOT found in the routing table?()

    A. Router(config)# ip default-route 0.0.0.0 255.255.255.255 s0

    B. Router(config)# ip route 0.0.0.0 255.255.255.255 s0

    C. Router(config)# ip default-route 0.0.0.0 0.0.0.0 s0

    D. Router(config)# ip route 0.0.0.0 0.0.0.0 s0

    E. Router(config)# ip route any any e0


    参考答案：D

  • 第5题：

    下面列出了路由器的各种命令状态，可以配置路由器全局参数的是______。

    A．router (config)#

    B．router＞

    C．route#

    D．router (config-if) #


    正确答案：A
    解析：router (confing) #为全局配置模式提示符；router＞为用户执行模式提示符：router#为特权模式提示符；router (config-if) #为接口配置模式提示符，故选A。

  • 第6题：

    查看路由表的信息的命令是（）。

    A．Router＃show ip routing

    B．Router＃show ip router

    C．Router＃show ip route

    D．Router＃show ip-route


    show ip route

相关内容