An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network.What conditions must be met in order for the VLANs configured on this switch to be automatically confi

题目

An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network.What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

A. The switch that will share its VLAN configuration must be in VTP server mode.

B. The switches must be in the same VTP domain.

C. The switch that will share the VLAN information must be configured as the root bridge.

D. The switches must be connected over VLAN trunks.

E. The switches must be configured to use the same STP version.

F. The switches must have VTP pruning activated.

相似考题

1.在Cisco Catalyst 3548以太网交换机上建立一个名为lib105的VLAN，下列正确的配置是______。A) Switch-3548#vlan 1 name lib 105Switch-3548#exitB) Switch-3548(vlan)#vlan 1 name lib 105Switch-3 548(vlan)#exitC) Switch-3548(vlan)#vlan 1000 name lib 105Switch3548(vlan)#exitD) Swimh-3548(vlan)#vlan 1002 name lib 105Switch-3548(vlan)#exitA．B．C．D．

2.The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?（）A. The servers have not had VLAN tagging enabled on their NICs.B. Speed and duplex have not been set.C. VLAN tagging was not set on the trunk.D. The servers have been connected with CAT5 cable.

3.Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?()A. Switch(config-if)# vlan allB. Switch(config-if)# switchport trunk encapsulation dot1qC. Switch(config-if)# switchport access vlan allD. Switch(config-if)# switchport mode trunkE. Switch(config-if)# switchport access vlan 303

4.You need to create a new VLAN on your Catalyst switch. This VLAN is to be named EZONEXAM. Which of the following need to be completed for the creation of this new VLAN? (Select all that apply)A. The EZONEXAM VLAN must be created.B. The desired ports must be added to the new EZONEXAM VLAN.C. The EZONEXAM VLAN must be added to all of the domains.D. The EZONEXAM VLAN must be named.E. An IP address must be configured for the EZONEXAM VLAN.F. None of the above. VLAN creations are automatic.

更多“An administrator is configuring a Catalyst switch with VLAN information that must be autom ”相关问题

  • 第1题：

    An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN 50 to the database?（）

    A. Switch(config-if)# switchport access vlan 50

    B. Switch(vlan)# vtp server

    C. Switch(config)# config-revision 20

    D. Switch(config)# vlan 50 name Tech

    E. Switch(vlan)# vlan 50

    F. Switch(vlan)# switchport trunk vlan 50


    参考答案：B, E

  • 第2题：

    Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?（）

    • A、Switch(config-if)# vlan all
    • B、Switch(config-if)# switchport trunk encapsulation dot1q
    • C、Switch(config-if)# switchport access vlan all
    • D、Switch(config-if)# switchport mode trunk
    • E、Switch(config-if)# switchport access vlan 303

    正确答案:C,D

  • 第3题：

    The network administrator maps VLAN 10 through 20 to MST instance 2.  How will this information be propagated to all appropriate switches？（）

    • A、 Information will be carried in the RSTP BPDUs.
    • B、 It will be propagated in VTP updates.
    • C、 Information stored in the Forwarding Information Base and the switch will reply on query.  
    • D、 Multiple Spanning Tree must be manually configured on the appropriate switches.

    正确答案:D

  • 第4题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第5题：

    Which of the following is not information provided from an IP phone to a Catalyst switch using  CDP？（）

    • A、 device PoE requirements
    • B、 device IP address
    • C、 device voice VLAN ID
    • D、 device platform

    正确答案:C

  • 第6题：

    You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?（）

    • A、The TESTKING VLAN must be created.
    • B、The desired ports must be added to the new TESTKING VLAN.
    • C、The TESTKING VLAN must be added to all of the domains.
    • D、The TESTKING VLAN must be named.
    • E、An IP address must be configured for the TESTKING VLAN.
    • F、None of the above. VLAN creations are automatic.

    正确答案:A,B,D

  • 第7题：

    By default, each port in a Cisco Catalyst switch is assigned to VLAN1. Which two recommendations are key to avoid unauthorized management access? （）

    • A、Create an additional ACL to block the access to VLAN 1.
    • B、Move the management VLAN to something other than default.
    • C、Move all ports to another VLAN and deactivate the default VLAN.
    • D、Limit the access in the switch using port security configuration.
    • E、Use static VLAN in trunks and access ports to restrict connections.
    • F、Shutdown all unused ports in the Catalyst switch.

    正确答案:B,F

  • 第8题：

    单选题
    Which of the following is not information provided from an IP phone to a Catalyst switch using  CDP？（）
    A

     device PoE requirements

    B

     device IP address

    C

     device voice VLAN ID

    D

     device platform


    正确答案： A
    解析： 暂无解析

  • 第9题：

    多选题
    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
    A

    The switch name must match the workgroup name of the local network.

    B

    The switch must be configured with an IP address and default gateway.

    C

    The remote workstations must have access to the management VLAN of the switch.

    D

    CDP must be enabled on the switch so that it can be located by other devices on the network.


    正确答案： D,B
    解析： 暂无解析

  • 第10题：

    单选题
    A Cisco Catalyst switch is part of the CIS network. As an experienced network administrator, you are thinking of filtering the traffic within VLANI00 with the use of a VACL named "test" on that switch. Which of the following command will enable that?（）
    A

    interface vlan 100 ip access-group test in

    B

    interface vlan 100 ip access-group test

    C

    vlan access-map test 100

    D

    vlan filter test vlan-list 100


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    You want to configure switch R1 to propagate VLAN information across the Company network  using VTP. What must be configured on a Cisco switch in order to advertise VLAN information？（）
    A

    VTP mode

    B

    VTP password

    C

    VTP revision number

    D

    VTP pruning

    E

    VTP domain name

    F

    None of the other alternatives apply


    正确答案： E
    解析： 暂无解析

  • 第12题：

    单选题
    The network administrator maps VLAN 10 through 20 to MST instance 2.  How will this information be propagated to all appropriate switches？（）
    A

     Information will be carried in the RSTP BPDUs.

    B

     It will be propagated in VTP updates.

    C

     Information stored in the Forwarding Information Base and the switch will reply on query.  

    D

     Multiple Spanning Tree must be manually configured on the appropriate switches.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A Cisco Catalyst switch is part of the CIS network. As an experienced network administrator, you are thinking of filtering the traffic within VLANI00 with the use of a VACL named "test" on that switch. Which of the following command will enable that?（）

    • A、interface vlan 100 ip access-group test in
    • B、interface vlan 100 ip access-group test
    • C、vlan access-map test 100
    • D、vlan filter test vlan-list 100

    正确答案:D

  • 第14题：

    You want to configure switch R1 to propagate VLAN information across the Company network  using VTP. What must be configured on a Cisco switch in order to advertise VLAN information？（）

    • A、VTP mode
    • B、VTP password
    • C、VTP revision number
    • D、VTP pruning
    • E、VTP domain name
    • F、None of the other alternatives apply

    正确答案:E

  • 第15题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）

    • A、The switch must be configured with an IP address,subnet mask,and default gateway.
    • B、The switch must be connected to a router over a VLAN trunk.
    • C、The switch must be reachable through a port connected to its management VLAN.
    • D、The switch console port must be connected to the Ethernet LAN.
    • E、The switch management VLAN must be created and have a membership of at least one switch port.
    • F、The switch must be fully configured as an SNMP agent.

    正确答案:A,C

  • 第16题：

    Given the output of the Floor3 switch, what statement describes the operation of this switch（）。

    • A、VTP is disabled on this switch.
    • B、The switch can create, change, and delete VLANs.
    • C、The switch learns VLAN information but does not save it to NVRAM.
    • D、The switch can create VLANs locally but will not forward this information to other switches.
    • E、The switch learns VLAN information and updates the local VLAN data base in NVRAM.

    正确答案:C

  • 第17题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）

    • A、The switch must be configured with an IP address, subnet mask, and default gateway.
    • B、The switch must be connected to a router over a VLAN trunk.
    • C、The switch must be reachable through a port connected to its management VLAN.
    • D、The switch console port must be connected to the Ethernet LAN.
    • E、The switch management VLAN must be created and have a membership of at least one switch

    正确答案:A,C

  • 第18题：

    A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）

    • A、The switch that will share the VLAN information must be in the VTP Server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be configured to use the same VTP version.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must be configured to use the same type of ID tagging.
    • G、The switches must be connected over VLAN trunks.

    正确答案:A,B,F

  • 第19题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第20题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： A,B,D
    解析： 暂无解析

  • 第21题：

    多选题
    By default, each port in a Cisco Catalyst switch is assigned to VLAN1. Which two recommendations are key to avoid unauthorized management access?（）
    A

    Create an additional ACL to block the access to VLAN 1.

    B

    Move the management VLAN to something other than default.

    C

    Move all ports to another VLAN and deactivate the default VLAN.

    D

    Limit the access in the switch using port security configuration.

    E

    Use static VLAN in trunks and access ports to restrict connections.

    F

    Shutdown all unused ports in the Catalyst switch.


    正确答案： B,F
    解析： 暂无解析

  • 第22题：

    单选题
    Given the output of the Floor3 switch, what statement describes the operation of this switch（）。
    A

    VTP is disabled on this switch.

    B

    The switch can create, change, and delete VLANs.

    C

    The switch learns VLAN information but does not save it to NVRAM.

    D

    The switch can create VLANs locally but will not forward this information to other switches.

    E

    The switch learns VLAN information and updates the local VLAN data base in NVRAM.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    多选题
    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）
    A

    The switch must be configured with an IP address,subnet mask,and default gateway.

    B

    The switch must be connected to a router over a VLAN trunk.

    C

    The switch must be reachable through a port connected to its management VLAN.

    D

    The switch console port must be connected to the Ethernet LAN.

    E

    The switch management VLAN must be created and have a membership of at least one switch port.

    F

    The switch must be fully configured as an SNMP agent.


    正确答案： B,D
    解析： 暂无解析

  • 第24题：

    多选题
    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）
    A

    The switch must be configured with an IP address, subnet mask, and default gateway.

    B

    The switch must be connected to a router over a VLAN trunk.

    C

    The switch must be reachable through a port connected to its management VLAN.

    D

    The switch console port must be connected to the Ethernet LAN.

    E

    The switch management VLAN must be created and have a membership of at least one switch


    正确答案： E,B
    解析： 暂无解析

相关内容