What are the characteristic of link state routing protocols?()A. The exchange of advertisement is triggered by a change in the network.B. All routers exchange routing tables with each other iIn a multipoint network.C. Packets are routed based upon the sho

题目
What are the characteristic of link state routing protocols?()

A. The exchange of advertisement is triggered by a change in the network.

B. All routers exchange routing tables with each other iIn a multipoint network.

C. Packets are routed based upon the shortest path to the destination.

D. Paths are chosen depending on the cost efficiency factor.

E. Every router in an OSPF area is capable of representing the entire network topology.

F. Only the designated router in an OSPF area can represent the entire network topology.

相似考题

1.What does the SRP distribute to the line modules when a routing table changes?()A.updated RIB-OutB.link-state informationC.an incremental updateD.the complete routing table

2.What are the different characteristics of distance vector and link state routing protocols?()A. Distance vector protocols send the entire routing table to directly connected neighbors.B. Distance vector protocols are responsible for sending updates to all networks listed in the routing table.C. Link state protocols are responsible for sending the entire routing table to the whole network.D. Link state protocols send updates regarding their own links status to all other routers on the network.E. None of the above

3.Which of the following technologies can be used in distance vector routing protocols to prevent routing loops?()A. Spanning Tree ProtocolB. Shortest path first treeC. Link-state advertisements (LSA)D. Hold-down timersE. Split horizonF. VRRP

4.Which CLI command is used to see the current OSPF link－state database?()A. show ospf databaseB. show ospf neighborC. show protocols ospfD. show ospf link-state

更多“What are the characteristic of link state routing protocols?() ”相关问题

  • 第1题：

    What information does a router running a link－state protocol use to build and maintain its topological database?()

    A. hello packets

    B. SAP messages sent by other routers

    C. LSAs from other routers

    D. beacons received on point-to-point links

    E. routing tables received from other link-state routers

    F. TTL packets from designated routers


    参考答案：A, C

  • 第2题：

    Open Shortest Path First (OSPF) was designed as an （请作答此空） gateway protocol, for use in an autonomous system such as a local area network (LAN). It implements Dijkstra's algorithm, also known as the （ ） path first algorithm. As a link-state routing protocol it was based on the link-state algorithm developed for the ARPANET in 1980 and the IS-IS routing protocol. OSPF was first standardised in 1989 as RFC 1131, which is now known as OSPF version 1.Routing protocols like OSPF calculate the shortest route to a destination through the network based on an algorithm. The first routing protocol that was widely implemented, the （ ）, calculated the shortest route based on hops, that is the number of routers that an IP packet had to traverse to reach the destination host. RIP successfully implemented dynamic routing, where routing tables change if the network topology changes. But RIP did not adapt its routing according to changing network conditions, such as data-transfer rate. Demand grew for a dynamic routing protocol that could calculate the fastest route to a destination. （ ） was developed so that the shortest path through a network was calculated based on the cost of the route, taking into account bandwidth, delay and load. Therefore OSPF undertakes route cost calculation on the basis of link-cost parameters, which can be weighted by the administrator. OSPF was quickly adopted because it became known for reliably calculating routes through large and complex local area networks.As a link state routing protocol, OSPF maintains link state （ ）, which are really network topology maps, on every router on which it is implemented. The state of a given route in the network is the cost, and OSPF algorithm allows every router to calculate the cost of the routes to any given reachable destination. Unless the administrator has made a configuration, the link cost of a path connected to a router is determined by the bit rate (1 Gbit/s, 10 Gbit/s, etc) of the interface. A router interface with OSPF will then advertise its link cost to neighbouring routers through multicast, known as the hello procedure. All routers with OSPF implementation keep sending hello packets, and thus changes in the cost of their links become known to neighbouring routers. The information about the cost of a link, that is the speed of a point to point connection between two routers, is then cascaded through the network because OSPF routers advertise the information they receive from one neighbouring router to all other neighbouring routers. This process of flooding link state information through the network is known as synchronisation. Based on this information, all routers with OSPF implementation continuously update their link state databases with information about the network topology and adjust their routing tables.OSPF has become a popular dynamic routing protocol. Other commonly used dynamic routing protocols are the RIP and the Border Gateway Protocol (BGP). Today routers support at least one interior gateway protocol to advertise their routing tables within a local area network. Frequently implemented interior gateway protocols besides OSPF are RIP, IS-IS, and the proprietary Interior Gateway Routing Protocol (IGRP) by Cisco.

    A.exterior
    B.interior
    C.border
    D.routing

    答案：B
    解析：

  • 第3题：

    it is belong a family of ip routing protocols，each router have a partial map of network，what is the routing protocol？


    正确答案: Class A： 10.0.0.0 --- 10.255.255.255
    Class B： 172.16.0.0 --- 172.31.255.255
    Class C:// 192.168.0.0 --- 192.168.255.255

  • 第4题：

    What does the SRP distribute to the line modules when a routing table changes？（）

    • A、updated RIB-Out
    • B、link-state information
    • C、an incremental update
    • D、the complete routing table

    正确答案:D

  • 第5题：

    Which two statements are characteristics of a distance vector routing protocol?（）

    • A、RIP is an example of distance vector routing protocols.
    • B、Updates are periodic and include the entire routing table.
    • C、Routing updates are sent only after topology changes
    • D、The protocol can be useful in hub-and-spoke and hierarchical networks.
    • E、Convergence is usually faster than with link state protocols
    • F、Each router has its own view of the topology

    正确答案:A,B

  • 第6题：

    What are the different characteristics of distance vector and link state routing protocols?（）

    • A、Distance vector protocols send the entire routing table to directly connected neighbors.
    • B、Distance vector protocols are responsible for sending updates to all networks listed in the routing table.
    • C、Link state protocols are responsible for sending the entire routing table to the whole network.
    • D、Link state protocols send updates regarding their own links status to all other routers on the network.
    • E、None of the above

    正确答案:A,D

  • 第7题：

    What information does a router running a link-state protocol use to build and maintain its topological database？ （）

    • A、 hello packets
    • B、 SAP messages sent by other routers 
    • C、 LSAs from other routers
    • D、 beacons received on point-to-point links
    • E、 routing tables received from other link-state routers
    • F、 TTL packets from designated routers

    正确答案:A,C

  • 第8题：

    What does the SRP distribute to the line modules when arouting table changes?（）

    • A、updated RIB-Out
    • B、link-state information
    • C、an incremental update
    • D、the complete routing table

    正确答案:D

  • 第9题：

    单选题
    Which CLI command is used to see the current OSPF link-state database?（）
    A

    show ospf database

    B

    show ospf neighbor

    C

    show protocols ospf

    D

    show ospf link-state


    正确答案： B
    解析： 暂无解析

  • 第10题：

    多选题
    While troubleshooting some connectivity issues， you issue the "show ip ospf database" in order toexamine the link state database. Which three of the statements below are true regarding theOSPF link state database？（）
    A

    Each router has an identical link state database

    B

    External routes are imported into a separate link state database

    C

    Synchronization of link state databases is maintained via flooding of LSAs

    D

    Information in the link state database is used to build a routing table by calculating a shortest-path tree

    E

    By default， link state databases are refreshed every 10 minutes in the absence of topologychanges


    正确答案： E,D
    解析： 暂无解析

  • 第11题：

    多选题
    What are the different characteristics of distance vector and link state routing protocols?（）
    A

    Distance vector protocols send the entire routing table to directly connected neighbors.

    B

    Distance vector protocols are responsible for sending updates to all networks listed in the routing table.

    C

    Link state protocols are responsible for sending the entire routing table to the whole network.

    D

    Link state protocols send updates regarding their own links status to all other routers on the network.

    E

    None of the above


    正确答案： D,C
    解析： 暂无解析

  • 第12题：

    多选题
    The statements below compare and contrast link state and distance vector routing protocols. Which of these are true?（）
    A

    Distance vector protocols send the entire routing table to directly connected neighbors.

    B

    Distance vector protocols are responsible for sending updates to all networks listed in the routing table.

    C

    Link state protocols are responsible for sending the entire routing table to the whole network.

    D

    Link state protocols send updates regarding their own links status to all other routers on the network.


    正确答案： A,D
    解析： 暂无解析

  • 第13题：

    Open Shortest Path First (OSPF) was designed as an （ ） gateway protocol, for use in an autonomous system such as a local area network (LAN). It implements Dijkstra's algorithm, also known as the （ ） path first algorithm. As a link-state routing protocol it was based on the link-state algorithm developed for the ARPANET in 1980 and the IS-IS routing protocol. OSPF was first standardised in 1989 as RFC 1131, which is now known as OSPF version 1.Routing protocols like OSPF calculate the shortest route to a destination through the network based on an algorithm. The first routing protocol that was widely implemented, the （请作答此空）, calculated the shortest route based on hops, that is the number of routers that an IP packet had to traverse to reach the destination host. RIP successfully implemented dynamic routing, where routing tables change if the network topology changes. But RIP did not adapt its routing according to changing network conditions, such as data-transfer rate. Demand grew for a dynamic routing protocol that could calculate the fastest route to a destination. （ ） was developed so that the shortest path through a network was calculated based on the cost of the route, taking into account bandwidth, delay and load. Therefore OSPF undertakes route cost calculation on the basis of link-cost parameters, which can be weighted by the administrator. OSPF was quickly adopted because it became known for reliably calculating routes through large and complex local area networks.As a link state routing protocol, OSPF maintains link state （ ）, which are really network topology maps, on every router on which it is implemented. The state of a given route in the network is the cost, and OSPF algorithm allows every router to calculate the cost of the routes to any given reachable destination. Unless the administrator has made a configuration, the link cost of a path connected to a router is determined by the bit rate (1 Gbit/s, 10 Gbit/s, etc) of the interface. A router interface with OSPF will then advertise its link cost to neighbouring routers through multicast, known as the hello procedure. All routers with OSPF implementation keep sending hello packets, and thus changes in the cost of their links become known to neighbouring routers. The information about the cost of a link, that is the speed of a point to point connection between two routers, is then cascaded through the network because OSPF routers advertise the information they receive from one neighbouring router to all other neighbouring routers. This process of flooding link state information through the network is known as synchronisation. Based on this information, all routers with OSPF implementation continuously update their link state databases with information about the network topology and adjust their routing tables.OSPF has become a popular dynamic routing protocol. Other commonly used dynamic routing protocols are the RIP and the Border Gateway Protocol (BGP). Today routers support at least one interior gateway protocol to advertise their routing tables within a local area network. Frequently implemented interior gateway protocols besides OSPF are RIP, IS-IS, and the proprietary Interior Gateway Routing Protocol (IGRP) by Cisco.

    A.OSPF
    B.RIP
    C.IS-IS
    D.EIGRP

    答案：B
    解析：

  • 第14题：

    Which of the following technologies can be used in distance vector routing protocols to prevent routing loops?（）

    • A、Spanning Tree Protocol
    • B、Shortest path first tree
    • C、Link-state advertisements (LSA)
    • D、Hold-down timers
    • E、Split horizon
    • F、VRP

    正确答案:D,E

  • 第15题：

    What are the characteristic of link state routing protocols?（）

    • A、The exchange of advertisement is triggered by a change in the network.
    • B、All routers exchange routing tables with each other iIn a multipoint network.
    • C、Packets are routed based upon the shortest path to the destination.
    • D、Paths are chosen depending on the cost efficiency factor.
    • E、Every router in an OSPF area is capable of representing the entire network topology.
    • F、Only the designated router in an OSPF area can represent the entire network topology.

    正确答案:A,C,E

  • 第16题：

    Which two are characteristics of link-state routing protocols?（） (Choose two.)

    • A、Routers choose a best path for a destination based on the SPF algorithm.
    • B、All routers in a given area or level build a consistent database describing the network's topology.
    • C、Routers choose the best path for a destination based on the interface on which they received the link stateadvertisement with the lowest cost.
    • D、All routers in a given area or level forward link state advertisements between interfaces in the same area or level, adding their metric to the link state advertisement's cost information when they forward it.

    正确答案:A,B

  • 第17题：

    Which of the following statements describe the characteristic of link state routing protocols?（）

    • A、The exchange of an advertisement is triggered by a change in the network.
    • B、All routers exchange routing tables with each other in a multipoint network.
    • C、Packets are routed based upon the shortest path to the destination.
    • D、Paths are chosen depending on the cost efficiency factor.
    • E、Every router in an OSPF area is capable of representing the entire network topology.
    • F、Only the designated router in an OSPF area can represent the entire network topology.

    正确答案:A,C,E

  • 第18题：

    The statements below compare and contrast link state and distance vector routing protocols. Which of these are true?（）

    • A、Distance vector protocols send the entire routing table to directly connected neighbors.
    • B、Distance vector protocols are responsible for sending updates to all networks listed in the routing table.
    • C、Link state protocols are responsible for sending the entire routing table to the whole network.
    • D、Link state protocols send updates regarding their own links status to all other routers on the network.

    正确答案:A,D

  • 第19题：

    Which of the following routing protocols is a link state and uses a backbone called area 0？（）

    • A、OSPF
    • B、EIGRP
    • C、BGP
    • D、IS-IS

    正确答案:A

  • 第20题：

    单选题
    What is the purpose of the OSPF link-state update packet?（）
    A

    describes a change to the OSPF hello timer

    B

    carries one or more link-state advertisements

    C

    establishes and maintains neighbor relationships

    D

    describes the contents of the entire link-state database


    正确答案： B
    解析： 暂无解析

  • 第21题：

    多选题
    Which two statements are characteristics of a distance vector routing protocol?（）
    A

    RIP is an example of distance vector routing protocols.

    B

    Updates are periodic and include the entire routing table.

    C

    Routing updates are sent only after topology changes

    D

    The protocol can be useful in hub-and-spoke and hierarchical networks.

    E

    Convergence is usually faster than with link state protocols

    F

    Each router has its own view of the topology


    正确答案： A,C
    解析： 暂无解析

  • 第22题：

    单选题
    Routing convergence time is which of the following？（）
    A

    Time required for a VPN connection to occur

    B

    Time required by protocols to update their forwarding tables after changes have occurred

    C

    Time required for an IDS to detect suspicious software

    D

    Time required by switch ports to update their link status and transition to the forwarding state


    正确答案： B
    解析： 暂无解析

  • 第23题：

    多选题
    What are the characteristic of link state routing protocols?（）
    A

    The exchange of advertisement is triggered by a change in the network.

    B

    All routers exchange routing tables with each other iIn a multipoint network.

    C

    Packets are routed based upon the shortest path to the destination.

    D

    Paths are chosen depending on the cost efficiency factor.

    E

    Every router in an OSPF area is capable of representing the entire network topology.

    F

    Only the designated router in an OSPF area can represent the entire network topology.


    正确答案： B,A
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following routing protocols is a link state and uses a backbone called area 0？（）
    A

    OSPF

    B

    EIGRP

    C

    BGP

    D

    IS-IS


    正确答案： D
    解析： 暂无解析

相关内容