As a network administrator, you have configured a Catalyst 6500 Series Switch with redundant supervisor engine in a CIS network. What is the result of issuing the redundancy force-switchover command on that switch?（）A. Automatic switchover from active to

题目

As a network administrator, you have configured a Catalyst 6500 Series Switch with redundant supervisor engine in a CIS network. What is the result of issuing the redundancy force-switchover command on that switch?（）

A. Automatic switchover from active to standby on primary supervisor failure

B. Reset of the primary supervisor.

C. Manual switchover from active to standby supervisor

D. Manual switchover from standby to active supervisor

相似考题

1.As a network administrator, you issue the interface auto qos voip cisco-phone command on a port in an edge network. It is possible for a Cisco Catalyst switch to check if a Cisco IP Phone is directly attached to that port by:（）A. using DHCP snoopingB. snooping the incoming 802.1Q VLAN tagC. using CDPD. snooping the CoS marking on the incoming frames

2.What will happen if you issue the redundancy force－switchover command on a Catalyst 6500Series Switch with redundant supervisor modules?()A. reset of the primary supervisorB. manual switchover from standby to active supervisorC. manual switchover from active to standby supervisorD. automatic switchover from active to standby on primary supervisor failure

3.Which statement best describes Cisco supervisor engine redundancy using Stateful Switchover？（）A、Switchover ensures that Layer 2 through Layer 4 traffic is not interruptedB、Redundancy requires BGP， OSPF， EIGRP， or IS-ISC、Redundancy provides fast supervisor switchover for all Cisco Catalyst 6500 series switchesD、Switchover can be caused by clock synchronization failure between supervisors

4.What will happen if you issue the redundancy force－switchover command on a Catalyst 6500 SeriesSwitch with redundant supervisor modules? ()A. reset of the primary supervisorB. manual switchover from standby to active supervisorC. manual switchover from active to standby supervisorD. automatic switchover from active to standby on primary supervisor failure

更多“As a network administrator, you have configured a Catalyst 6500 Series Switch with redundant supervisor engine in a CIS network. What is the result of issuing the redundancy force-switchover command o”相关问题

  • 第1题：

    Which two characteristics apply to Cisco Catalyst 6500 Series Switch supervisor redundancy  using NSF？（）

    • A、 independent of SSO
    • B、 NSF combined with SSO enables supervisor engine load balancing
    • C、 supported by RIPv2， OSPF， IS-IS， and EIGRP
    • D、 supports IPv4 and IPv6 multicast
    • E、 prevents route flapping
    • F、 dependent on FIB tables

    正确答案:E,F

  • 第2题：

    You are at a client site. It is a medium-sized business and needs a Cisco Catalyst switch that offers high availability and security. What type of Catalyst switches would you recommend？（）

    • A、 Catalyst 2960 Series
    • B、 Catalyst 3750 Series
    • C、 Catalyst 4900 Series
    • D、 Catalyst 6500 Series

    正确答案:A

  • 第3题：

    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）

    • A、The switch that will share its VLAN configuration must be in VTP server mode.
    • B、The switches must be in the same VTP domain.
    • C、The switch that will share the VLAN information must be configured as the root bridge.
    • D、The switches must be connected over VLAN trunks.
    • E、The switches must be configured to use the same STP version.
    • F、The switches must have VTP pruning activated.

    正确答案:A,B,D

  • 第4题：

    Company has a Catalyst 6500 and you need to configure redundancy between the supervisormodules. With route processor redundancy （RPR+）， the redundant supervisor engine is fullyinitialized and configured， which shortens the switchover time if the active supervisor engine fails.Which three statements are true about the RPR + operations when the redundant supervisorengine switched over the failed primary supervisor engine？（）

    • A、Static IP routes are maintained across a switchover because they are configured from entries inthe configuration file
    • B、Information about dynamic routing states， maintained on the active supervisor engine， issynchronized to the redundant supervisor engine and is transferred during the switchover
    • C、Information about dynamic routing states， maintained on the active supervisor engine， is notsynchronized to the redundant supervisor engine and is lost on switchover
    • D、The Forwarding Information Base （FIB） tables are cleared on a switchover. As a result， routedtraffic is interrupted until route tables reconverge
    • E、Static IP routes are cleared across a switchover and recreated from entries in the configurationfile on the redundant supervisor engine
    • F、The Forwarding Information Base （FIB） tables are maintained during the switchover. As aresult， routed traffic continues without any interruption when the failover occurs

    正确答案:A,C,D

  • 第5题：

    Cat6500（config）# router ospf 1  Cat6500（config-router）# network 0.0.0.0 255.255.255.255 area 0  Cat6500（config-router）# nsf Cat6500（config-router）#end  Refer to the exhibit. The configuration is used to enable nonstop forwarding for OSPF on a Catalyst 6500 Series  Switch with redundant supervisor engines.  The default CEF configuration is unchanged. After testing， user traffic is interrupted and NSF is not operational.  What is the most likely reason？ （）

    • A、CEF was not properly configured.
    • B、OSPF was not properly configured for graceful restart.
    • C、Stateful switchover was not correctly configured.
    • D、NSF for OSPF is only supported in area 0.

    正确答案:C

  • 第6题：

    多选题
    An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
    A

    The switch that will share its VLAN configuration must be in VTP server mode.

    B

    The switches must be in the same VTP domain.

    C

    The switch that will share the VLAN information must be configured as the root bridge.

    D

    The switches must be connected over VLAN trunks.

    E

    The switches must be configured to use the same STP version.

    F

    The switches must have VTP pruning activated.


    正确答案： A,B,D
    解析： 暂无解析

  • 第7题：

    多选题
    Which two characteristics apply to Cisco Catalyst 6500 Series Switch supervisor redundancy  using NSF？（）
    A

    independent of SSO

    B

    NSF combined with SSO enables supervisor engine load balancing

    C

    supported by RIPv2， OSPF， IS-IS， and EIGRP

    D

    supports IPv4 and IPv6 multicast

    E

    prevents route flapping

    F

    dependent on FIB tables


    正确答案： A,F
    解析： 暂无解析

  • 第8题：

    单选题
    A Cisco Catalyst switch is part of the CIS network. As an experienced network administrator, you are thinking of filtering the traffic within VLANI00 with the use of a VACL named "test" on that switch. Which of the following command will enable that?（）
    A

    interface vlan 100 ip access-group test in

    B

    interface vlan 100 ip access-group test

    C

    vlan access-map test 100

    D

    vlan filter test vlan-list 100


    正确答案： B
    解析： 暂无解析

  • 第9题：

    多选题
    Which two characteristics apply to Cisco Catalyst 6500 Series Switch supervisor redundancyusing NSF？（）
    A

    independent of SSO

    B

    NSF combined with SSO enables supervisor engine load balancing

    C

    supported by RIPv2， OSPF， IS-IS， and EIGRP

    D

    supports IPv4 and IPv6 multicast

    E

    prevents route flapping

    F

    dependent on FIB tables


    正确答案： D,C
    解析： 暂无解析

  • 第10题：

    单选题
    You have configured the Odyssey Access Client with a profile which has the "Disable Server Verification" setting cleared.What will be the result if the device certificate on the MAG Series device has expired and the user attempts to authenticate?（）
    A

    The user will be instructed to call the network administrator.

    B

    The user will fail authentication.

    C

    The user will be prompted to install a new device certificate on the MAG Series device.

    D

    The user will successfully authenticate and have full network access.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    You are at a client site. It is a medium-sized business and needs a Cisco Catalyst switch that offers high availability and security. What type of Catalyst switches would you recommend？（）
    A

     Catalyst 2960 Series

    B

     Catalyst 3750 Series

    C

     Catalyst 4900 Series

    D

     Catalyst 6500 Series


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Which statement best describes Cisco supervisor engine redundancy using Stateful Switchover？（）
    A

    Switchover ensures that Layer 2 through Layer 4 traffic is not interrupted

    B

    Redundancy requires BGP， OSPF， EIGRP， or IS-IS

    C

    Redundancy provides fast supervisor switchover for all Cisco Catalyst 6500 series switches

    D

    Switchover can be caused by clock synchronization failure between supervisors


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which two characteristics apply to Cisco Catalyst 6500 Series Switch supervisor redundancyusing NSF？（）

    • A、independent of SSO
    • B、NSF combined with SSO enables supervisor engine load balancing
    • C、supported by RIPv2， OSPF， IS-IS， and EIGRP
    • D、supports IPv4 and IPv6 multicast
    • E、prevents route flapping
    • F、dependent on FIB tables

    正确答案:E,F

  • 第14题：

    You have configured the Odyssey Access Client with a profile which has the "Disable Server Verification" setting cleared.What will be the result if the device certificate on the MAG Series device has expired and the user attempts to authenticate?（）

    • A、The user will be instructed to call the network administrator.
    • B、The user will fail authentication.
    • C、The user will be prompted to install a new device certificate on the MAG Series device.
    • D、The user will successfully authenticate and have full network access.

    正确答案:B

  • 第15题：

    What will happen if you issue the redundancy force-switchover command on a Catalyst 6500Series Switch with redundant supervisor modules?（）

    • A、reset of the primary supervisor
    • B、manual switchover from standby to active supervisor
    • C、manual switchover from active to standby supervisor
    • D、automatic switchover from active to standby on primary supervisor failure

    正确答案:C

  • 第16题：

    As a network administrator, you issue the interface auto qos voip cisco-phone command on a port in an edge network. It is possible for a Cisco Catalyst switch to check if a Cisco IP Phone is directly attached to that port by:（）

    • A、using DHCP snooping
    • B、snooping the incoming 802.1Q VLAN tag
    • C、using CDP
    • D、snooping the CoS marking on the incoming frames

    正确答案:C

  • 第17题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第18题：

    多选题
    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
    A

    The switch name must match the workgroup name of the local network.

    B

    The switch must be configured with an IP address and default gateway.

    C

    The remote workstations must have access to the management VLAN of the switch.

    D

    CDP must be enabled on the switch so that it can be located by other devices on the network.


    正确答案： D,B
    解析： 暂无解析

  • 第19题：

    单选题
    On the Catalyst 6500 Series switch, which command is used to establish a console connection to the Firewall Services Module?（）
    A

    ssh

    B

    connect

    C

    login

    D

    session


    正确答案： D
    解析： 暂无解析

  • 第20题：

    多选题
    pany has a Catalyst 6500 and you need to configure redundancy between the supervisor  modules. With route processor redundancy （RPR+）， the redundant supervisor engine is fully initialized and configured， which shortens the switchover time if the active supervisor engine fails.   Which three statements are true about the RPR + operations when the redundant supervisor  engine switched over the failed primary supervisor engine？ （）
    A

    Static IP routes are maintained across a switchover because they are configured from entries in  the configuration file.

    B

    Information about dynamic routing states， maintained on the active supervisor engine， is  synchronized to the redundant supervisor engine and is transferred during the switchover.

    C

    Information about dynamic routing states， maintained on the active supervisor engine， is not  synchronized to the redundant supervisor engine and is lost on switchover.

    D

    The Forwarding Information Base （FIB） tables are cleared on a switchover. As a result， routed  traffic is interrupted until route tables reconverge.

    E

    Static IP routes are cleared across a switchover and recreated from entries in the configuration  file on the redundant supervisor engine.

    F

    The Forwarding Information Base （FIB） tables are maintained during the switchover. As a  result， routed traffic continues without any interruption when the failover occurs.


    正确答案： B,E
    解析： 暂无解析

  • 第21题：

    单选题
    As a network administrator, you have configured a Catalyst 6500 Series Switch with redundant supervisor engine in a CIS network. What is the result of issuing the redundancy force-switchover command on that switch?（）
    A

    Automatic switchover from active to standby on primary supervisor failure

    B

    Reset of the primary supervisor.

    C

    Manual switchover from active to standby supervisor

    D

    Manual switchover from standby to active supervisor


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）
    A

    Verify that different native VLANs exist between two switches for security purposes.

    B

    Verify that the VLAN was added on all switches with the use of the show vlan command. 

    C

    Verify that the switch is configured to allow for trunking on the switch ports.

    D

    Verify that each switch port has the correct IP address space assigned to it for the new VLAN.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    What will happen if you issue the redundancy force-switchover command on a Catalyst 6500 SeriesSwitch with redundant supervisor modules? （）
    A

    reset of the primary supervisor

    B

    manual switchover from standby to active supervisor

    C

    manual switchover from active to standby supervisor

    D

    automatic switchover from active to standby on primary supervisor failure


    正确答案： D
    解析： 暂无解析

相关内容