Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（）LS Type: Summary Links (AS Boundary Router)Link State ID: 9.9.9.9 (AS Bou

题目

Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（）LS Type: Summary Links (AS Boundary Router)Link State ID: 9.9.9.9 (AS Boundary Router address)Advertising Router: 3.3.3.3LS Seq Number: 8000000DChecksum: 0xE43ALength: 28Network Mask: /0TOS: 0 Metric: 100

A. The output describes the contents of a Type 5 LSA

B. 3.3.3.3 identifies a ro uter as being the router performing redistribution

C. R1‘s metric for its best route to reach the router with RID 9.9.9.9 is 100

D. The router with RID 3.3.3.3‘s metric for its best route to reach the router with RID 9.9.9.9 is 100

相似考题

1.Which CLI command is used to see the current OSPF link－state database?()A. show ospf databaseB. show ospf neighborC. show protocols ospfD. show ospf link-state

2.The following output exists on Router R1, a router internal to area 1. What can you d etermine as true from the output of the show ip ospf database summary command?()A. The LSA was created by an ABR due to an area range command.B. The LSA was created by an ASBR due to a summary - address command.C. If cr eated by an area range command, the best metric for a subordinate subnet on that ABR must have been 11.D. None of the other answers is correct.

3.The administrator wants to verify the current state of the OSPF database loading process. Which show command should the administrator use?()A. show ip ospf [process - id] interfaceB. show ip ospf neighborC. show ip ospf [process - id]D. show ip ospf [process - id area - id] database

4.Which command allows viewing of only OSPF routes?()A.show ip ospf routeB.show ip route protocol ospfC.show route protocol ospfD.show ospf table

更多“Examine the following excerpt from the show ip ospf database asbr －summary command on rout ”相关问题

  • 第1题：

    What are two Cisco IOS commands that can be used to view neighbor adjacencies?()

    A. show ip ospf interfaces

    B. show ip ospf protocols

    C. show ip ospf neighbors

    D. show ip ospf database


    参考答案：A, C

  • 第2题：

    Which command is used to display the collection of OSPF link states?()

    A. show ip ospf lsa database

    B. show ip ospf link-state

    C. show ip ospf neighbors

    D. show ip ospf database


    参考答案：D

  • 第3题：

    Which command is used to display the collection of OSPF link states?（）

    • A、show ip ospf lsa database
    • B、show ip ospf link-state
    • C、show ip ospf neighbors
    • D、show ip ospf database

    正确答案:D

  • 第4题：

    On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）

    • A、show ip route
    • B、show ip eigrp topology
    • C、show ip ospf topology
    • D、show ip eigrp topology 10.1.1.0/24

    正确答案:A,C

  • 第5题：

    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)

    • A、R1 is the router that redistributed the route
    • B、R1's metric to reach subnet 10.2.2.0/24 is 64
    • C、The route was redistributed on a router that has a router ospf 1 command configured
    • D、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

    正确答案:C

  • 第6题：

    What are two Cisco IOS commands that can be used to view neighbor adjacencies?（）

    • A、show ip ospf interfaces
    • B、show ip ospf protocols
    • C、show ip ospf neighbors
    • D、show ip ospf database

    正确答案:A,C

  • 第7题：

    Which show command will display only the Type 5 LSAs in the OSPF topology database？（）

    • A、show ip ospf database external
    • B、show ip ospf database nssa - external
    • C、show ip route ospf
    • D、show ip ospf datab ase summary
    • E、show ip route

    正确答案:A

  • 第8题：

    Which command displays the IBGP and EBGP neighbors that are configured?（）

    • A、show ip bgp paths
    • B、show ip bgp peers
    • C、show ip bgp
    • D、show ip bgp summary

    正确答案:D

  • 第9题：

    Which command allows viewing of only OSPF routes?（）

    • A、show ip ospf route
    • B、show ip route protocol ospf
    • C、show route protocol ospf
    • D、show ospf table

    正确答案:C

  • 第10题：

    单选题
    The administrator wants to verify the current state of the OSPF database loading process. Which show command should the administrator use?（）
    A

    show ip ospf [process - id] interface

    B

    show ip ospf neighbor

    C

    show ip ospf [process - id]

    D

    show ip ospf [process - id area - id] database


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100
    A

    The output describes the contents of a Type 5 LSA

    B

    3.3.3.3 identifies a ro uter as being the router performing redistribution

    C

    R1's metric for its best route to reach the router with RID 9.9.9.9 is 100

    D

    The router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100


    正确答案： D
    解析： 暂无解析

  • 第12题：

    多选题
    Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）
    A

    The show ip ospf neighbors command lists two neighbors off Fa0/0.

    B

    The show ip ospf neighbors command lists four neighbors off Fa0/0.

    C

    The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.

    D

    The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.


    正确答案： C,A
    解析： 暂无解析

  • 第13题：

    Which show command will display only the Type 5 LSAs in the OSPF topology database?()

    A. show ip ospf database external

    B. show ip ospf database nssa - external

    C. show ip route ospf

    D. show ip ospf datab ase summary

    E. show ip route


    参考答案：A

  • 第14题：

    哪个命令能列出与邻居路由器邻接状态（）

    • A、debug ospf events
    • B、show ip ospf border-routers
    • C、show ip ospf neighbor
    • D、show ip ospf database

    正确答案:C

  • 第15题：

    The administrator wants to verify the current state of the OSPF database loading process. Which show command should the administrator use?（）

    • A、show ip ospf [process - id] interface
    • B、show ip ospf neighbor
    • C、show ip ospf [process - id]
    • D、show ip ospf [process - id area - id] database

    正确答案:B

  • 第16题：

    Which command displays the number of times that the OSPF Shortest Path First (SPF) algorithm has been executed?（）

    • A、show ip protocol
    • B、show ip ospf
    • C、sho w ip ospf database
    • D、show ip ospf interface

    正确答案:B

  • 第17题：

    You have a multi-area OSPF network and you’re concerned because one of the sites is havingconnectivity problem to resources in a different area. Which IOS privileged mode command wouldyou enter to confirm that your network：  （A） has a path to its ABR，  （B） has a path to its ASBR， and  （C）the SPF calculation is functional？（）

    • A、show ip protocols
    • B、show running-config
    • C、show ip ospf neighbor
    • D、show ip ospf border-routers

    正确答案:D

  • 第18题：

    Which command is used to display the collection of OSPF link states？（）

    • A、show ip ospf lsa database（not A）
    • B、show ip ospf link-state
    • C、show ip ospf neighbors
    • D、show ip ospf database

    正确答案:D

  • 第19题：

    Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）

    • A、The show ip ospf neighbors command lists two neighbors off Fa0/0.
    • B、The show ip ospf neighbors command lists four neighbors off Fa0/0.
    • C、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.
    • D、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.

    正确答案:B,C

  • 第20题：

    Which of the following can either directly or indirec tly identify all the interfaces for which both 1) OSPF has been enabled and 2) OSPF is not passive?（）

    • A、show ip ospf database
    • B、show ip ospf interface brief
    • C、show ip protocols
    • D、show ip route ospf
    • E、show ip ospf neighbors

    正确答案:B,C

  • 第21题：

    Which CLI command is used to see the current OSPF link-state database?（）

    • A、show ospf database
    • B、show ospf neighbor
    • C、show protocols ospf
    • D、show ospf link-state

    正确答案:A

  • 第22题：

    单选题
    Which show command will display only the Type 5 LSAs in the OSPF topology database？（）
    A

    show ip ospf database external

    B

    show ip ospf database nssa - external

    C

    show ip route ospf

    D

    show ip ospf datab ase summary

    E

    show ip route


    正确答案： B
    解析： 暂无解析

  • 第23题：

    多选题
    Routers R1 and R2 are OSPF neighbors using their Fa0/0 interfaces, respectively, using default settings for all timers. An engineer ad ds the ip ospf hello - interval 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this change?（）
    A

    The show ip ospf neighbor command on R1 lists the revised Hello timer

    B

    The show ip ospf interfac e brief command on R1 lists the revised Hello timer

    C

    The R1 - R2 neighborship fails due to Hello timer mismatcH

    D

    The show ip ospf interface command on R1 lists the revised Hello timer


    正确答案： B,C
    解析： 暂无解析

  • 第24题：

    单选题
    Which information will the Cisco IOS command show ip ospf rib display？（）
    A

    only the local OSPF routes

    B

    only the OSPF routes installed in the routing table

    C

    only the remotely learned OSPF routes

    D

    all the OSPF routes from the OSPF database that are eligible to be put in the routing table


    正确答案： B
    解析： 暂无解析

相关内容