The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?()R2 show ip policyInterface Route mapFa0／0 RM1Fa0／1 RM2S0／0／0 RM3A. R2 will forward all packets that enter Fa0/0 per the PBR

题目
The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?()R2 show ip policyInterface Route mapFa0／0 RM1Fa0／1 RM2S0／0／0 RM3

A. R2 will forward all packets that enter Fa0/0 per the PBR configuration.

B. R2 will use route map RM2 when determining how to forward packets that exit interface Fa0/1.

C. R2 will consider using PBR for all packets exiting S0/0 /0 per route map RM3.

D. R2 will consider using PBR for all packets entering S0/0/0 per route map RM3.

相似考题

1.The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?（）Network Next Hop Metric LocPrf Weight Path* 130.1.1.0/28 1.1.1.1 0 1 2 3 4 iA. The route is learne d from an eBGP peerB. The route has no more than three ASNs in the AS_PatHC. The route is the best route for this prefixD. None of these facts can be positively determined by this output

2.What can be determined from the line of show ip route output shown in the exhibit?（）A、The next routing update can be expected in 35 seconds.B、The IP address 10.10.10.6 is configured on S0/1.C、The IP address 10.10.10.8 is configured on S0/1.D、This route is using the default administrative distance.E、The 10.10.10.8 network is two hops away from this router.

3. Router B1, an internal router in area 1, displays the following output. The only two ABRs connected to area 1 are performing Type 3 LSA filterinG. Which of the following answers is true based on the information in the output from B1?（） R1# show ip route 10.1.0.0 255.255.0.0 longer - prefixes ! Legend lines omitted for brevity 10.0.0.0/8 is variably subnetted, 17 subnets, 3 masks O 10.1.2.0/24 [110/658] via 10.10.13.1, 00:00:32, Serial0/0/0.1 O IA 10.1.1.0/24 [110/658] via 10.10.23.2, 00:41:39, Ser ial0/0/0.2 O IA 10.1.3.0/24 [110/658] via 10.10.23.2, 00:41:39, Serial0/0/0.2A、A Type 3 LSA for 10.2.2.0/24 was filtered by both ABRsB、A Type 3 LSA for 10.1.2.0/24 was not filtered by both ABRsC、A Type 3 LSA for 10.1.3.0/24 was not filtered by at least one ABRD、A Type 3 LSA for 10.1.1.0/24 filtered by both ABRs

4.Based on the exhibited output, which three statements are true?()A. The route to 10.2.0.0/16 was redistributed into EIGRP.B. A default route has been redistributed into the EIGRP autonomous system.C. R1 is configured with the ip summary - address command.D. R1 is sourcing a n external EIGRP route from Null0.E. The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.F. R1 is configured with the variance command.

更多“The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?()R2 show ip policyInterface Route mapFa0／0 RM1Fa0／1 RM2S0／0／0 RM3 ”相关问题

  • 第1题：

    The following output was taken from Router R3. A scan of R3's configuration shows that no bandwidth commands have been configured in this router. Which of the following answers lists configuration settings could be a part of a configuration tha t results in the following output?（） R3#show ip ospf interface brief Interface PID Area IP Address/Mask Cost State Nbrs F/C Se0/0/0.2 3 34 10.10.23.3/29 647 P2P 1/1 Se0/0/0.1 3 34 10.10.13.3/29 1000 P2P 1/1 Fa0/0 3 34 10.10.34.3/24 20 BDR 1/1

    • A、An a uto - cost reference - bandwidth 1000 command in router ospf mode
    • B、An auto - cost reference - bandwidth 2000 command in router ospf mode
    • C、An ip ospf cost 1000 interface S0/0/0.1 command in router ospf mode
    • D、An auto - cost reference - bandwidth 64700 command i n router ospf mode

    正确答案:A,B

  • 第2题：

    The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?（） R2# show ip policy Interface Route map Fa0/0 RM1 Fa0/1 RM2 S0/0/0 RM3

    • A、R2 will forward all packets that enter Fa0/0 per the PBR configuration.
    • B、R2 will use route map RM2 when determining how to forward packets that exit interface Fa0/1.
    • C、R2 will consider using PBR for all packets exiting S0/0 /0 per route map RM3.
    • D、R2 will consider using PBR for all packets entering S0/0/0 per route map RM3.

    正确答案:D

  • 第3题：

    Router R1 connects to Router R2 over an Ethernet LAN with both routers using their F0/0 interfaces. R1 learns a route from R2 using EIGRP f or IPv6. That route lists F0/0 as the outgoing interface with R2 as the next hop. The configuration excerpt shows all relevant configuration on R2's F0/0 interface. Which of the following is true about R1's route?（） interface f0/0 mac - address 1111.1111.1 111 ipv6 address 2000::/64 eui - 64 ipv6 address 2001::1/64

    • A、The next hop is 2000::1311:11FF:FE11:1111
    • B、The next hop is FE80::1311:11FF:FE11:1111
    • C、The next hop is FE80::5111:11FF:FE11:1111
    • D、The next hop is 2001::1

    正确答案:B

  • 第4题：

    Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）

    • A、The show ip eigrp neighbors command on R1 lists the revised Hello timer
    • B、The show ip eigrp interfaces command on R1 lists the revised Hello timer
    • C、The R1 - R2 neighborship fails due to Hello timer mismatcH
    • D、The show ip eigrp interfaces detail command on R1 lists the revised Hello timer

    正确答案:D

  • 第5题：

    The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18

    • A、This router has set the Weight of this route to 10.
    • B、This router's BGP table lists this route as an iBGP route.
    • C、This router's MED has been set to 10.
    • D、This router's BGP table lists an AS_Path length of 10 for this route.

    正确答案:C

  • 第6题：

    单选题
    The following output occurs on Router R1. Which of the following cannot be determine d from this output?（） R1# show ip route 180.1.1.0 255.255.255.240 Routing entry for 180.1.1.0/28 Known via "bgp 2", distance 20, metric 0 Tag 3, type external Last update from 192.168.1.2 00:10:27 ago Routing Descriptor Blocks: * 192.168.1.2, from 19 2.168.1.2, 00:10:27 ago Route metric is 0, traffic share count is 1 AS Hops 2 Route tag 3
    A

    The type of BGP peer (iBGP or eBGP) that advertised this route to R1

    B

    R1's ASN

    C

    The next - hop router's ASN

    D

    The AS_Path length


    正确答案： D
    解析： 暂无解析

  • 第7题：

    单选题
    The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18
    A

    This router has set the Weight of this route to 10.

    B

    This router's BGP table lists this route as an iBGP route.

    C

    This router's MED has been set to 10.

    D

    This router's BGP table lists an AS_Path length of 10 for this route.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    多选题
    Refer to the exhibit. On the basis of the information in the exhibit， which two statements are true？（）
    A

    When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose2 because of the higher MED value of SanJose2

    B

    The serial 0/0/1 interface on the ISP router has been configured with the set metric 50command

    C

    The output was generated by entering the show ip bgp command on the SanJose1 router

    D

    The output was generated by entering the show ip bgp command on the ISP router

    E

    The serial 0/0/1 interface on the ISP router has been configured with the set metric 75command

    F

    When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose1 because of the lower MED value of SanJose1


    正确答案： A,E
    解析： 暂无解析

  • 第9题：

    多选题
    The following output was taken from the show ip bgp command on Router R2. In this case, which of the following commands are most likely to already be configured on R2?（） BGP router identifier 11.11.11.11, local AS number 11 ... Neighbor V AS Ms gRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 87 87 0 0 0 00:00:06 Idle (Admin) 2.2.2.2 4 3 173 183 41 0 0 00:58:47
    A

    router bgp 11

    B

    neighbor 1.1.1.1 remote- as 11

    C

    neighbor 2.2.2.2 prefix - limit 1

    D

    neighbor 1.1.1.1 shutdown


    正确答案： A,B
    解析： 暂无解析

  • 第10题：

    单选题
    The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?（） Network Next Hop Metric LocPrf Weight Path * 130.1.1.0/28 1.1.1.1 0 1 2 3 4 i
    A

    The route is learne d from an eBGP peer

    B

    The route has no more than three ASNs in the AS_PatH

    C

    The route is the best route for this prefix

    D

    None of these facts can be positively determined by this output


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?（） R2# show ip policy Interface Route map Fa0/0 RM1 Fa0/1 RM2 S0/0/0 RM3
    A

    R2 will forward all packets that enter Fa0/0 per the PBR configuration.

    B

    R2 will use route map RM2 when determining how to forward packets that exit interface Fa0/1.

    C

    R2 will consider using PBR for all packets exiting S0/0 /0 per route map RM3.

    D

    R2 will consider using PBR for all packets entering S0/0/0 per route map RM3.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）
    A

    The show ip eigrp neighbors command on R1 lists the revised Hello timer

    B

    The show ip eigrp interfaces command on R1 lists the revised Hello timer

    C

    The R1 - R2 neighborship fails due to Hello timer mismatcH

    D

    The show ip eigrp interfaces detail command on R1 lists the revised Hello timer


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)

    • A、R1 is the router that redistributed the route
    • B、R1's metric to reach subnet 10.2.2.0/24 is 64
    • C、The route was redistributed on a router that has a router ospf 1 command configured
    • D、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

    正确答案:C

  • 第14题：

    The following output occurs on Router R1 , which runs both EIGRP for IPv6 and OSPFv3, with redistribution from EIGRP into OSPF configured with the redistribute eigrp 1 metric 25 command. Interface S0/0/1 has been enabled for EIGRP ASN 1. Which of the following should be true of redistribution in this case?（） D 2000::/64 [90/1422516] via FE80::213:19FF:FE7B:5026, Serial0/0/ 1 C 2000:0:0:1::/64 [0/0] via Serial0/0/1, directly connected L 2000::1:213:19FF:FE7B:5004/128 [0/0] via Serial0/0/1, receive

    • A、Route 2000::/64 will be redistributed.
    • B、Route 2 000:0:0:1::/64 will be redistributed.
    • C、Route 2000:1:213:19FF:FE7B:5004/128 will be redistributed.
    • D、No routes will be redistributed because of the omission of the subnets parameter of the redistribute command.

    正确答案:A

  • 第15题：

    The following output was taken from the show ip bgp command on Router R2. In this case, which of the following commands are most likely to already be configured on R2?（） BGP router identifier 11.11.11.11, local AS number 11 ... Neighbor V AS Ms gRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 87 87 0 0 0 00:00:06 Idle (Admin) 2.2.2.2 4 3 173 183 41 0 0 00:58:47

    • A、router bgp 11
    • B、neighbor 1.1.1.1 remote- as 11
    • C、neighbor 2.2.2.2 prefix - limit 1
    • D、neighbor 1.1.1.1 shutdown

    正确答案:A,D

  • 第16题：

    The following output on Router R1 lists details of a BGP route for 190.1.0.0/16. Which of the following is true based on this output?（） R1# show ip bgp 190.1.0.0/16 BGP routing table entry for 190.1.0.0/16, version 121 Paths: (1 available, best #1, table Default - IP - Routing - Table) Advertised to update - groups: 1 1 2 3 4 1.1.1.1 from 2.2.2.2 (3.3.3.3) Origin IGP, metric 0, localpref 100, valid, internal, best

    • A、R1 has a neighbor 1.1.1.1 command configured.
    • B、R1 has a neighbor 2.2.2.2 command configured.
    • C、The show ip bgp command lists a line for 190.1.0.0/16 with both a n > and an i on the left.
    • D、R1 is in ASN 1.

    正确答案:B,C

  • 第17题：

    多选题
    What can be determined from the line of show ip route output shown in the exhibit?（）
    A

    The next routing update can be expected in 35 seconds.

    B

    The IP address 10.10.10.6 is configured on S0/1.

    C

    The IP address 10.10.10.8 is configured on S0/1.

    D

    This route is using the default administrative distance.

    E

    The 10.10.10.8 network is two hops away from this router.


    正确答案： E,C
    解析： 暂无解析

  • 第18题：

    单选题
    Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100
    A

    The output describes the contents of a Type 5 LSA

    B

    3.3.3.3 identifies a ro uter as being the router performing redistribution

    C

    R1's metric for its best route to reach the router with RID 9.9.9.9 is 100

    D

    The router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    Which of the following answers can be verified as true based on the following command output from Router R1?（） R1#show ip ospf virtual - links Virtual Link OSPF_VL0 to router 4.4.4.4 is up Run as demand circuit DoNotAge LSA alloweD. Transit area 1, via interface FastEthernet0/1, Cost of using 3
    A

    R1 is configured with  an area 0 virtual - link 4.4.4.4 cost 3 command.

    B

    The ping 4.4.4.4 command on R1 must currently be successful.

    C

    R1's Fa0/0 OSPF cost is 3.

    D

    4.4.4.4 is known to R1 based on a Type 1 LSA in area 1.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    多选题
    The following output was taken from Router R3. A scan of R3's configuration shows that no bandwidth commands have been configured in this router. Which of the following answers lists configuration settings could be a part of a configuration tha t results in the following output?（） R3#show ip ospf interface brief Interface PID Area IP Address/Mask Cost State Nbrs F/C Se0/0/0.2 3 34 10.10.23.3/29 647 P2P 1/1 Se0/0/0.1 3 34 10.10.13.3/29 1000 P2P 1/1 Fa0/0 3 34 10.10.34.3/24 20 BDR 1/1
    A

    An a uto - cost reference - bandwidth 1000 command in router ospf mode

    B

    An auto - cost reference - bandwidth 2000 command in router ospf mode

    C

    An ip ospf cost 1000 interface S0/0/0.1 command in router ospf mode

    D

    An auto - cost reference - bandwidth 64700 command i n router ospf mode


    正确答案： C,B
    解析： 暂无解析

  • 第21题：

    单选题
    The following output, taken from a show ip bgp command on Router R1, lists two neighbors. In what BGP neighbor state is neighbor 1.1.1.1?（） Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 60 61 26 0 0 00:45:01 0 2.2.2.2 4 3 153 159 26 0 0 00:38:13 1
    A

    Idle

    B

    Opensent

    C

    Active

    D

    Established


    正确答案： B
    解析： 暂无解析

  • 第22题：

    多选题
    The following output on Router R1 lists details of a BGP route for 190.1.0.0/16. Which of the following is true based on this output?（） R1# show ip bgp 19 0.1.0.0/16 BGP routing table entry for 190.1.0.0/16, version 121 Paths: (1 available, best #1, table Default - IP - Routing - Table) Advertised to update - groups: 1 1 2 3 4 1.1.1.1 from 2.2.2.2 (3.3.3.3) Origin IGP, metric 0, localpref 100, valid, internal, best
    A

    R1 has a neighbor 1.1.1.1 command configured.

    B

    R1 has a neighbor 2.2.2.2 command configured.

    C

    The show ip bgp command lists a line for 190.1.0.0/16 with both an > and an i on the left.

    D

    R1 is in ASN 1.


    正确答案： D,C
    解析： 暂无解析

  • 第23题：

    单选题
    Router B1, an internal router in area 1, displays the following output. The only two ABRs connected to area 1 are performing Type 3 LSA filterinG. Which of the following answers is true based on the information in the output from B1?（） R1# show ip route 10.1.0.0 255.255.0.0 longer - prefixes ! Legend lines omitted for brevity 10.0.0.0/8 is variably subnetted, 17 subnets, 3 masks O 10.1.2.0/24 [110/658] via 10.10.13.1, 00:00:32, Serial0/0/0.1 O IA 10.1.1.0/24 [110/658] via 10.10.23.2, 00:41:39, Ser ial0/0/0.2 O IA 10.1.3.0/24 [110/658] via 10.10.23.2, 00:41:39, Serial0/0/0.2
    A

    A Type 3 LSA for 10.2.2.0/24 was filtered by both ABRs

    B

    A Type 3 LSA for 10.1.2.0/24 was not filtered by both ABRs

    C

    A Type 3 LSA for 10.1.3.0/24 was not filtered by  at least one ABR

    D

    A Type 3 LSA for 10.1.1.0/24 filtered by both ABRs


    正确答案： A
    解析： 暂无解析

相关内容