Refer to the exhibit. Router R1 is being used as a relay device for autoconfiguration of switch S1.Which configuration will acc omplish this? ()A.S1(config)# interface fastethernet 0/1S1(config - if)# ip helper - address 10.0.0.2B.S1(config)# interface fa

题目
Refer to the exhibit. Router R1 is being used as a relay device for autoconfiguration of switch S1.Which configuration will acc omplish this? ()

A.S1(config)# interface fastethernet 0/1S1(config - if)# ip helper - address 10.0.0.2

B.S1(config)# interface fastethernet 0/1 S1(config - if)# ip helper - address 20.0.0.1

C.R1(config)# interface fastethernet 0/0 R1(config - if)# ip help er - address 20.0.0.2R 1(config - if)# ip helper - address 20.0.0.3 R1(config - if)# ip helper - address 20.0.0.4 R1(config - if)# exit R1(config)# interface fastethernet 0/1 R1(config - if)# ip helper - address 10.0.0.1

D.R1(config)# interface fastethernet 0/0 R1 (config - if)# ip helper - address 20.0.0.1 R2(config)# interface fastethernet 0/0 R2(config - if)# ip helper - address 20.0.0.1 R3(config)# interface fastethernet 0/0 R3(config - if)# ip helper - address 20.0.0.1 R4(config)# interface fastethernet 0/0 R4(config - if)# ip helper - address 20.0.0.1

E.S1(config)# interface fastethernet 0/1 S1(config - if)# ip helper - address 10.0.0.2 R2(config)# interface fastethernet 0/0 R2(config - if)# ip helper - address 20.0.0.1 R3(config)# interface fastethernet 0/0 R3(config - if) # ip helper - address 20.0.0.1 R4(config)# interface fastethernet 0/0 R4(config - if)# ip helper - address 20.0.0.1

相似考题

1.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

2.Refer to the exhibit. Which th ree commands should be used on router B1 to redistribute the EIGRP AS 10 routes into RIP?()A. router ripB. router eigrp 10C. redistribute eigrp 10D. redistribute ripE. default - metric 10000 100 255 1 1500F. default - metric 5

3.Refer to the exhibit. R1 accesses the Internet using E0/0. You have been asked to co nfigure R1 so that a default route is generated to its downstream devices (191.0.0.1 and 192.0.0.1). Which commands would create this configuration? （）A.router eigrp 190redistribute static ! ip route 0.0.0.0 0.0.0.0 Null0B.ip default - network 2 0.0.0.0C.router eigrp 190 redistribute static ! ip route 0.0.0.0 255.255.255.255 Null0D.ip default - network 20.20.20.0

4.Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.

更多“Refer to the exhibit. Router R1 is being used as a relay device for autoconfiguration of switch S1.Which configuration will acc omplish this? () ”相关问题

  • 第1题：

    Refer to the exhibit. A network administrator wants to reduce the number of OSPF routes advertised from Area 1 into Area 2. As the router configuration specialist, what two things would you do to accomplish this goal?（）

    A. Enter the configuration on router B1.

    B. Enter the configuration on router B4.

    C. On the same router, enter the Summary - address 10.10.1.0 255.255.255.128 subcommand.

    D. On the same router, enter the Area 1 range 10.10.1.0 255.255.255.128 subcommand.

    E. On the same ro uter, enter the Area 2 range 10.10.1.0 255.255.255.128 subcommand.


    参考答案：A, D

  • 第2题：

    Refer to the exhibit. What statement is true base d upon the configuration in the exhibit? ()

    A. CGMP version 2 is being used.

    B. The switch will use sparse mode first, dense mode second.

    C. A rendezvous point must be configured in order for the interface to operate in sparse mode.

    D. IGMP version 2 is being used.

    E. The rendezvous point is IP address 172.16.4.16.

    F. If a rendezvous point is configured, the interface cannot operate in dense mode.


    参考答案：C

  • 第3题：

    Refer to the exhibit. Network 10.0.0.0／8 is being advertised to autonomous system 65550 via both external links. Which statement about the preferred path to the 10.0.0.0／8 network is true? ()

    A. Router R2 will be preferred because it has the higher neighbor IP address.

    B. Router R2 will be preferr ed because its neighbor has a lower autonomous system number.

    C. Router R1 will be preferred because it has a lower local preference.

    D. Router R2 will be preferred because it has a higher local preference.

    E. Router R1 will be preferred because its nei ghbor has the higher autonomous system number.

    F. Router R1 will be preferred because it has the lower neighbor IP address.


    参考答案：D

  • 第4题：

    Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? ()

    A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface.

    B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent.

    C. Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement.

    D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.


    参考答案：C

  • 第5题：

    Refer to the exhibit. Which of these statements correctly describes the state of the switch once the boot process has been completed?()

    A.As FastEthernet0/12 will be the last to come up, it will not be blocked by STP.

    B.Remote access management of this switch will not be possible without configuration change.

    C.More VLANs will need to be created for this switch.

    D.The switch will need a different IOS code in order to support VLANs and STP.


    参考答案：B

  • 第6题：

    Refer to the diagram. Which three statements describe the router port configuration and the switch port configuration as shown in the topology? ()

    A.The Router1 WAN port is configured as a trunking port.

    B.The Router1 port connected to Switch1 is configured using subinterfaces.

    C.The Router1 port connected to Switch1 is configured as 10 Mbps.

    D.The Switch1 port connected to Router1 is configured as a trunking port.

    E.The Switch1 port connected to Host B is configured as an access port.

    F.The Switch1 port connected to Hub1 is configured as full duplex.


    参考答案：B, D, E

  • 第7题：

    Refer to the exhibit. What can be determined about the router from the console output?()

    A.No configuration file was found in NVRAM.

    B.No configuration file was found in flash.

    C.No configuration file was found in the PCMCIA card.

    D.Configuration file is normal and will load in 15 seconds.


    参考答案：B

  • 第8题：

    Which statement is true regarding an Ethernet collision domain?（）

    • A、If a router is used, the collision domain includes all devices connected to the router.
    • B、If a hub is used, the collision domain is limited to each device and the hub.
    • C、If a switch is used, the collision domain is limited to each device and the switch.
    • D、If a bridge is used, the collision domain includes all devices connected to the bridge.

    正确答案:C

  • 第9题：

    Cat6500（config）# router ospf 1  Cat6500（config-router）# network 0.0.0.0 255.255.255.255 area 0  Cat6500（config-router）# nsf Cat6500（config-router）#end  Refer to the exhibit. The configuration is used to enable nonstop forwarding for OSPF on a Catalyst 6500 Series  Switch with redundant supervisor engines.  The default CEF configuration is unchanged. After testing， user traffic is interrupted and NSF is not operational.  What is the most likely reason？ （）

    • A、CEF was not properly configured.
    • B、OSPF was not properly configured for graceful restart.
    • C、Stateful switchover was not correctly configured.
    • D、NSF for OSPF is only supported in area 0.

    正确答案:C

  • 第10题：

    单选题
    Refer to the exhibit. Which of these statements correctly describes the state of the switch once the boot process has been completed?（）
    A

    As FastEthernet0/12 will be the last to come up, it will not be blocked by STP.

    B

    Remote access management of this switch will not be possible without configuration change.

    C

    More VLANs will need to be created for this switch.

    D

    The switch will need a different IOS code in order to support VLANs and STP.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Which statement is true regarding an Ethernet collision domain?（）
    A

    If a router is used, the collision domain includes all devices connected to the router

    B

    If a hub is used, the colision domain is limited to each device and the hub

    C

    If a switch is used, the collision domain is limited to each device and the switch

    D

    If a bridge is used, the collision domain includes all devices connected to the bridge


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Refer to the exhibit. A network administrator configures a new router and enters the copy startup-config running-config on the router. The network administrator powers down the router and sets it up at a remote location. When the router starts, it enter the system configuration dialog as shown. What is the caust of the problem?（）
    A

    The network administrator faled to save the configuration.

    B

    The configuration register is set to 0x2100.

    C

    The boot system flash command is missing from the configuration.

    D

    The configuraiton register is set to 0x2102.

    E

    The router is configured with the boot system startup command.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. What three statements are true about the IS － IS configuration?()

    A.The router is in area 49.0001.0002

    B.The router acts as a Level 1 - 2 router

    C.CLNS routing is enable d for the router

    D.The router has a system ID of 0003.0004

    E.The interfaces have a functional IS - IS configuration

    F.The network service access point selector (NSEL) byte has a value of 0


    参考答案：B, E, F

  • 第14题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第15题：

    Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?()

    A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5

    B. None of the BGP updates that are received on router R2 will ever be received by router R5

    C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4

    D. All BGP updates that are received on router R2 will be sent directly to router R5


    参考答案：B

  • 第16题：

    Refer to the exhibit. Router R1 is connected to networks 172.1 6.1.0 ／26 and 172.16.1.64 ／27. On the basis of the partial output in the exhibit, which statement is true? ()

    A. Router R1 will deny the 172.16.1.0/26 route while permitting the 172.16.1.64/27 route to be advertised.

    B. Router R1 will advertise both rou tes.

    C. Router R1 should be reconfigured with an ACL instead of an ip prefix - list command.

    D. Router R1 will deny the 172.16.1.0/27 route while permitting the 172.16.1.0/26 route to be advertised.


    参考答案：D

  • 第17题：

    Refer to the exhibit. What switch proves the spanning－tree designated port role for the network segment that services the printers?()

    A.Switch1

    B.Switch2

    C.Switch3

    D.Switch4


    参考答案：C

  • 第18题：

    Refer to the exhibit. What does the (*) represent in the output?()

    A.Packet is destined for a local interface to the router.

    B.Packet was translated, but no response was received from the distant device.

    C.Packet was not translated, because no additional ports are available.

    D.Packet was translated and fast switched to the destination.


    参考答案：D

  • 第19题：

    The VLANs in switch R1 are being modified. Which of the following are updated in R1 every time a VLAN is modified？（）

    • A、Configuration revision number
    • B、Configuration revision flag field
    • C、Configuration revision reset switch
    • D、Configuration revision database
    • E、None of the other alternatives apply

    正确答案:A,D

  • 第20题：

    Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）

    • A、The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2
    • B、The configuration is invalid because the DHCP options are global configuration commands
    • C、The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces
    • D、The router will choose which pool to use based upon the interface the DHCP request wasreceived on

    正确答案:D

  • 第21题：

    Which statement is true regarding an Ethernet collision domain?（）

    • A、If a router is used, the collision domain includes all devices connected to the router
    • B、If a hub is used, the colision domain is limited to each device and the hub
    • C、If a switch is used, the collision domain is limited to each device and the switch
    • D、If a bridge is used, the collision domain includes all devices connected to the bridge

    正确答案:C

  • 第22题：

    单选题
    Which statement is true regarding an Ethernet collision domain?（）
    A

    If a router is used, the collision domain includes all devices connected to the router.

    B

    If a hub is used, the collision domain is limited to each device and the hub.

    C

    If a switch is used, the collision domain is limited to each device and the switch.

    D

    If a bridge is used, the collision domain includes all devices connected to the bridge.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）
    A

    The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2

    B

    The configuration is invalid because the DHCP options are global configuration commands

    C

    The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces

    D

    The router will choose which pool to use based upon the interface the DHCP request wasreceived on


    正确答案： A
    解析： 暂无解析

相关内容