The Testking Central and Remote offices are configured as shown below:The remote router can be successfully pinged from the central office but the remote users can‘t access the server at the central office.Based on the output above, what do you suspect is

题目

The Testking Central and Remote offices are configured as shown below:The remote router can be successfully pinged from the central office but the remote users can‘t access the server at the central office.Based on the output above, what do you suspect is the cause of this problem?（）

A. The Frame Relay PVC is down.

B. The IP addressing on the Central/Remote serial link is incorrect.

C. RIP routing information is not being forwarded.

D. Frame Relay inverse-ARP is not properly configured.

相似考题

1.The remote host parameter configured on the LNS must match which parameter on the LAC?()A.hostnameB.hostC.client-nameD.remote-host

2.You have just configured a static default route on router TK1. What is the purpose of a default route?()A. It is a route to be used when the routing protocol fails.B. It is a route configured by an ISP that sends traffic into a corporate network.C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.E. It is used to send traffic to a stub network.

3.Which one of the protocols below allows a router to respond to an ARP request destined to a remote host?()A. Gateway DPB. Reverse ARPC. proxy ARPD. Inverse ARPE. indirect ARP

4.What are two examples of RE exception traffic?()A. BGP updates that travel through the local router and are destined for a remote router.B. OSPF hello packets that are sent from a remote router and are destined for the local router.C. Telnet traffic that is sent from a remote host and is destined for the local router.D. Telnet traffic that travels through the local router and is destined for a remote end host.

更多“The Testking Central and Remote offices are configured as shown below:The remote router ca ”相关问题

  • 第1题：

    You are a network administrator at TestKing, Inc. and you‘re getting complaintsthat users on the TestKing2 Ethernet network can‘t access the TestKing1 site. Totroubleshoot this, you begin by looking at the Testking1 and Testking2 routerconfigurations as shown below:Based on the above output, what is the underlying cause of this problem?（）

    A. Link state routing protocol is missing.

    B. Incorrectly configured IP addresses

    C. IGRP is incorrectly configured.

    D. Frame relay is not configured.

    E. None of the above


    参考答案：C

  • 第2题：

    Which one of the protocols below allows a router to respond to an ARP request destined to a remote host?（）

    • A、Gateway DP
    • B、Reverse ARP
    • C、proxy ARP
    • D、Inverse ARP
    • E、indirect ARP

    正确答案:C

  • 第3题：

    A BGP router is configured as shown below：  interface ethernet 0 ip address 10.10.10.1 255.255.0.0! int serial 0 ip address 172.16.1.1 255.255.255.252! router bgp 65001 neighbor 192.168.1.1 remote-as 65002   Based on the above configuration， which of the following BGP statements would inject the10.10.0.0/16 prefix into the BGP routing table？（）

    • A、network 10.0.0.0
    • B、network 10.10.0.0 mask 255.255.0.0
    • C、network 10.10.10.1 mask 255.255.255.255
    • D、network 10.10.10.0 mask 255.255.255.0
    • E、network 10.0.0.0 mask 255.255.0.0

    正确答案:B

  • 第4题：

    Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）

    • A、A peer router running IBGP
    • B、A peer router running EBGP
    • C、A community member running IBGP
    • D、A peer group member running IBGP
    • E、A peer group member running EBGP

    正确答案:A

  • 第5题：

    A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0

    • A、The process id is configured improperly
    • B、The OSPF area is configured improperly
    • C、The network wildcard mask is configured improperly
    • D、The network number is configured improperly
    • E、The AS is configured improperly
    • F、The network subnet mask is configuerd improperly

    正确答案:C

  • 第6题：

    You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003, and all client computers run Windows XP Professional. A member server named Testking1 functions as a file and print server. Testking1 is configured with default operating system settings. A user named Tess is a member of the local Backup Operators group on Testking1. She is responsible for performing backups on this computer. You need to ensure that Tess can create Remote Assistance invitations from Testking1. What are two possible ways for you to achieve this goal? （）(Each correct answer presents a complete solution. Choose two)

    • A、Log on to Testking1 with administrative privileges.Use the System Properties dialog box to enable Remote Assistance.
    • B、Direct Tess to use the System Properties dialog box to enable Remote Assistance on Testking1.
    • C、In your Default Domain Policy, enable the Solicit Remote Assistance setting.
    • D、In your Default Domain Policy, enable the Offer Remote Assistance setting.
    • E、Log on to Testking1 with administrative privileges. Use GPedit.msc to enable the Offer Remote Assistance setting.

    正确答案:A,C

  • 第7题：

    单选题
    You have just configured a static default route on router TK1. What is the purpose of a default route?（）
    A

    It is a route to be used when the routing protocol fails.

    B

    It is a route configured by an ISP that sends traffic into a corporate network.

    C

    It is a route used when a packet is destined for a remote network that is not listed in the routing table.

    D

    It is a route manually configured for a specific remote network for which a routing protocol is not configured.

    E

    It is used to send traffic to a stub network.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    What is the benefit of using the Cisco Easy VPN Server feature along with the Cisco software VPN client for implementing remote-access VPNs？ （）
    A

     The Cisco Easy VPN Server feature and the Cisco software VPN client use the same GUI configuration tool to simplify remote-access VPN configurations.

    B

     The Cisco Easy VPN Server feature allows the Cisco software VPN client to receive its security policies from the central site VPN device. This minimizes the configuration requirements at the remote location for large remote access VPN deployments.

    C

     The Cisco Easy VPN Server feature and the Cisco software VPN client use hardware-based encryption to reduce the CPU overhead of the central site VPN router.

    D

     The Cisco Easy VPN Server feature and the Cisco software VPN client enable scalable remote-access VPNs deployment by using a thick client/thin server model where the central site VPN router can handle thousands of incoming VPN connections.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    You are the network administrator for All servers run Windows Server 2003. You manage a server named Testking2. IIS is installed on Testking2. Testking2 hosts TestKing's public Web site. You need to configure Testking2 to allow remote administration of all Web sites. In addition, you must be able to view the system and application event logs remotely. The remote administration must be done by using a Web browser. The procedure for remote administration must be encrypted. What should you do?（）
    A

    Enable Remote Desktop.

    B

    Install the Remote Administration (HTML) Windows component.

    C

    Install the Remote Desktop Web Connection Windows component.

    D

    Configure the startup type of the Telnet service to Automatic and start the Telnet service.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Why is NTP an important component when implementing IPSec VPN in a PKI environment？（）
    A

     To ensure the router has the correct time when generating its private/public key pairs.

    B

     To ensure the router has the correct time when checking certificate validity from the remote peers

    C

     To ensure the router time is sync with the remote peers for encryption keys generation

    D

     To ensure the router time is sync with the remote peers during theDH exchange

    E

     To ensure the router time is sync with the remote peers when generating the cookies during IKE phase 1


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）
    A

    A peer router running IBGP

    B

    A peer router running EBGP

    C

    A community member running IBGP

    D

    A peer group member running IBGP

    E

    A peer group member running EBGP


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Refer to the exhibit. A network administrator configures a new router and enters the copy startup-config running-config on the router. The network administrator powers down the router and sets it up at a remote location. When the router starts, it enter the system configuration dialog as shown. What is the caust of the problem?（）
    A

    The network administrator faled to save the configuration.

    B

    The configuration register is set to 0x2100.

    C

    The boot system flash command is missing from the configuration.

    D

    The configuraiton register is set to 0x2102.

    E

    The router is configured with the boot system startup command.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Router R1 is configured as shown below:router eigrp 100network 10.0.0.0eigrp stubBased on the information shown above, which two types of routes will be advertised?()

    A. Receive - only

    B. Stub

    C. Static

    D. Summary

    E. Connected

    F. Dynamic


    参考答案：D, E

  • 第14题：

    Which statement is true regarding the remote route table of a local WX device?（）

    • A、Remote routes are the compression subnets advertised by remote WX devices.
    • B、Remote routes include routes for remote hosts or subnets advertised by a WAN router.
    • C、Remote routes are the routes advertised by remote routers that are more than two hops away.
    • D、Remote routes are the compression subnets advertised by the local WX device to the remote WX devices.

    正确答案:A

  • 第15题：

    What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）

    • A、A hub router prevents routes from being advertised to the remote router.
    • B、Only remote routers are configured as stubs.
    • C、Stub routers are not queried for routes.
    • D、Spoke routers connected to hub routers answer the route queries for the stub router.
    • E、A stub router should have only EIGRP hub routers as neighbors.
    • F、EIGRP stub routing should be used on hub routers only.

    正确答案:B,C,E

  • 第16题：

    Why is NTP an important component when implementing IPSec VPN in a PKI environment？（）

    • A、 To ensure the router has the correct time when generating its private/public key pairs.
    • B、 To ensure the router has the correct time when checking certificate validity from the remote peers
    • C、 To ensure the router time is sync with the remote peers for encryption keys generation
    • D、 To ensure the router time is sync with the remote peers during theDH exchange
    • E、 To ensure the router time is sync with the remote peers when generating the cookies during IKE phase 1

    正确答案:B

  • 第17题：

    Router R1 is configured as shown below: router eigrp 100 network 10.0.0.0 eigrp stub Based on the information shown above, which two types of routes will be advertised？（）

    • A、Receive - only
    • B、Stub
    • C、Static
    • D、Summary
    • E、Connected
    • F、Dynamic

    正确答案:D,E

  • 第18题：

    You work as a exchange administrator at TestKing.com. The TestKing.com network contains an internalnetwork as well as a perimeter network. The primeter network contains an Exchange Server 2010 EdgeTransport Server named TESTKING-EX. During the course of day you receive an instruction form the CIO to formulate a remote managementsolution for TESTKING-EX01 based on the set criteria below： You need to ensure that management traffic is encypted. You nedd to ensure that remote administration is permitted fron the Internet network.You need to ensure that Exchange Management Console （EMC） is supported. What should you do？（）

    • A、You should recommend that Windows Management Instrumentation Command-line （WMIC） be used.
    • B、You should recommend that Lightweight Directory Access Protocol（LDAP）over Secure Socket Layer（SSL） be used.
    • C、You should recommend that Windows Remote Management （WinRM） over SSL be used.
    • D、You should recommend that Remote Desktop Protocol（RDP）over Secure Socket Layer（SSL）be used.

    正确答案:C

  • 第19题：

    多选题
    Router R1 is configured as shown below: router eigrp 100 network 10.0.0.0 eigrp stub Based on the information shown above, which two types of routes will be advertised？（）
    A

    Receive - only

    B

    Stub

    C

    Static

    D

    Summary

    E

    Connected

    F

    Dynamic


    正确答案： B,A
    解析： 暂无解析

  • 第20题：

    单选题
    A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（） Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
    A

    The process id is configured improperly

    B

    The OSPF area is configured improperly

    C

    The network wildcard mask is configured improperly

    D

    The network number is configured improperly

    E

    The AS is configured improperly

    F

    The network subnet mask is configuerd improperly


    正确答案： F
    解析： 暂无解析

  • 第21题：

    单选题
    Which one of the protocols below allows a router to respond to an ARP request destined to a remote host?（）
    A

    Gateway DP

    B

    Reverse ARP

    C

    proxy ARP

    D

    Inverse ARP

    E

    indirect ARP


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A BGP router is configured as shown below：  interface ethernet 0 ip address 10.10.10.1 255.255.0.0! int serial 0 ip address 172.16.1.1 255.255.255.252! router bgp 65001 neighbor 192.168.1.1 remote-as 65002   Based on the above configuration， which of the following BGP statements would inject the10.10.0.0/16 prefix into the BGP routing table？（）
    A

    network 10.0.0.0

    B

    network 10.10.0.0 mask 255.255.0.0

    C

    network 10.10.10.1 mask 255.255.255.255

    D

    network 10.10.10.0 mask 255.255.255.0

    E

    network 10.0.0.0 mask 255.255.0.0


    正确答案： C
    解析： 暂无解析

  • 第23题：

    多选题
    What are two examples of RE exception traffic?（）
    A

    BGP updates that travel through the local router and are destined for a remote router.

    B

    OSPF hello packets that are sent from a remote router and are destined for the local router.

    C

    Telnet traffic that is sent from a remote host and is destined for the local router.

    D

    Telnet traffic that travels through the local router and is destined for a remote end host.


    正确答案： D,C
    解析： 暂无解析

相关内容