Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?()A. All BGP updates that are received on router R 2 will be sent to routers R3 and R

题目
Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?()

A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5

B. None of the BGP updates that are received on router R2 will ever be received by router R5

C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4

D. All BGP updates that are received on router R2 will be sent directly to router R5

相似考题

1.A router is running BGP and receives more than one route for a particular prefix. Assume all the routes for this prefix have the same attributes.Which three path features would be reasons be for the rou ter to ignore some of the routes and not consider them as candidates for the best path?（）A. paths from an internal BGP (iBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHB. paths for which the NEXT_HOP is inaccess ibleC. paths from an external BGP (eBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHD. paths for which the NEXT_HOP is accessibleE. paths that are marked as synchronized in the show ip bgp outputF. paths that are marked as not synchronized in the show ip bgp output

2.Refer to the exhibit. R1 accesses the Internet using E0/0. You have been asked to co nfigure R1 so that a default route is generated to its downstream devices (191.0.0.1 and 192.0.0.1). Which commands would create this configuration? （）A.router eigrp 190redistribute static ! ip route 0.0.0.0 0.0.0.0 Null0B.ip default - network 2 0.0.0.0C.router eigrp 190 redistribute static ! ip route 0.0.0.0 255.255.255.255 Null0D.ip default - network 20.20.20.0

3.Refer to the exhibit. A network administrator wants to reduce the number of OSPF routes advertised from Area 1 into Area 2. As the router configuration specialist, what two things would you do to accomplish this goal?（）A. Enter the configuration on router B1.B. Enter the configuration on router B4.C. On the same router, enter the Summary - address 10.10.1.0 255.255.255.128 subcommand.D. On the same router, enter the Area 1 range 10.10.1.0 255.255.255.128 subcommand.E. On the same ro uter, enter the Area 2 range 10.10.1.0 255.255.255.128 subcommand.

4.Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.

更多“Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?() ”相关问题

  • 第1题：

    Refer to the exhibit. Which statement is true about the router configuration that is shown ?Select the best response.()

    A. Additional DHCP options will be imported from another DHCP server.

    B. The DHCP server pools need to be bound to an interface to operate.

    C. This configuration will provide IP configuration information to two different su bnets.

    D. Additional DCHP option information needs to be imported from another DHCP server.

    E. If the router hands out all the addresses in pool 1, then it will supply addresses from pool 2.


    参考答案：C

  • 第2题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第3题：

    Refer to the exhibit. Network 10.0.0.0／8 is being advertised to autonomous system 65550 via both external links. Which statement about the preferred path to the 10.0.0.0／8 network is true? ()

    A. Router R2 will be preferred because it has the higher neighbor IP address.

    B. Router R2 will be preferr ed because its neighbor has a lower autonomous system number.

    C. Router R1 will be preferred because it has a lower local preference.

    D. Router R2 will be preferred because it has a higher local preference.

    E. Router R1 will be preferred because its nei ghbor has the higher autonomous system number.

    F. Router R1 will be preferred because it has the lower neighbor IP address.


    参考答案：D

  • 第4题：

    Refer to the exhibit. Router RT - 1 and router RT - 2 both advertise network 131.25.0.0/16 to routerRT - 3 via internal BGP. What is the reason that router RT - 3 chose router RT - 1 as its best path tonetwork 131.25.0.0/16.（）

    A. It has a better router ID

    B. It advertises a lower autonomous system

    C. It advertises t he best AS - path

    D. It advertises the best local preference

    E. It advertises the best origin code

    F. It advertises the best MED


    参考答案：A

  • 第5题：

    Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? ()

    A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface.

    B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent.

    C. Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement.

    D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.


    参考答案：C

  • 第6题：

    Refer to the exhibit. Router R1 is connected to networks 172.1 6.1.0 ／26 and 172.16.1.64 ／27. On the basis of the partial output in the exhibit, which statement is true? ()

    A. Router R1 will deny the 172.16.1.0/26 route while permitting the 172.16.1.64/27 route to be advertised.

    B. Router R1 will advertise both rou tes.

    C. Router R1 should be reconfigured with an ACL instead of an ip prefix - list command.

    D. Router R1 will deny the 172.16.1.0/27 route while permitting the 172.16.1.0/26 route to be advertised.


    参考答案：D

  • 第7题：

    Refer to the exhibit. What can be determined about the router from the console output?()

    A.No configuration file was found in NVRAM.

    B.No configuration file was found in flash.

    C.No configuration file was found in the PCMCIA card.

    D.Configuration file is normal and will load in 15 seconds.


    参考答案：B

  • 第8题：

    A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）

    • A、To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50
    • B、Th e router will prefer the shortest autonomous system path
    • C、If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MED
    • D、The router will prefer the route with the lower MED

    正确答案:B

  • 第9题：

    Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）

    • A、The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2
    • B、The configuration is invalid because the DHCP options are global configuration commands
    • C、The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces
    • D、The router will choose which pool to use based upon the interface the DHCP request wasreceived on

    正确答案:D

  • 第10题：

    多选题
    Refer to the exhibit. On the basis of the information in the exhibit， which two statements are true？（）
    A

    When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose2 because of the higher MED value of SanJose2

    B

    The serial 0/0/1 interface on the ISP router has been configured with the set metric 50command

    C

    The output was generated by entering the show ip bgp command on the SanJose1 router

    D

    The output was generated by entering the show ip bgp command on the ISP router

    E

    The serial 0/0/1 interface on the ISP router has been configured with the set metric 75command

    F

    When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose1 because of the lower MED value of SanJose1


    正确答案： A,E
    解析： 暂无解析

  • 第11题：

    单选题
    Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）
    A

    The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2

    B

    The configuration is invalid because the DHCP options are global configuration commands

    C

    The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces

    D

    The router will choose which pool to use based upon the interface the DHCP request wasreceived on


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Refer to the exhibit. A network administrator configures a new router and enters the copy startup-config running-config on the router. The network administrator powers down the router and sets it up at a remote location. When the router starts, it enter the system configuration dialog as shown. What is the caust of the problem?（）
    A

    The network administrator faled to save the configuration.

    B

    The configuration register is set to 0x2100.

    C

    The boot system flash command is missing from the configuration.

    D

    The configuraiton register is set to 0x2102.

    E

    The router is configured with the boot system startup command.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. Which statement is true? ()

    A. Only traffic with a destination from 10.10.0.0/19 will be permitted.

    B. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.

    C. Only traffic going to 10.10.0.0/19 will be permitted.

    D. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.


    参考答案：B

  • 第14题：

    Refer to the exhibit The neighbor 10.1.1.1 weight 200 BGP configuration command has been configured on router A. What will be the result of this configuration? ()

    A. Router A will prefer the path through router B for network 172.20.0.0

    B. Router A will prefer the path through router C for network 172.20.0.0

    C. Packets from router D will prefer the path through router B for networks advertised by router A

    D. Packets from r outer D will prefer the path through router C for networks advertised by router A


    参考答案：A

  • 第15题：

    Refer to the exhibit. Autonomous systems 200 and 300 have EBGP sessions established with their directly connected routers in au tonomous system 100. IGP has been configured on all routers in autonomous system 100 and they successfully exchange routing updates. Traffic originated in autonomous system 200 cannot reach the destination autonomous system 300. What configuration shoul d be done on the routers in autonomous system 100 in order for the traffic coming from autonomous system 200 to be forwarded to autonomous system 300?（）

    A. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned off.

    B. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned on.

    C. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned on.

    D. IBGP session mu st be established between routers R1 and R3, and the synchronization must be turned off.

    E. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned off.

    F. IBGP session must be established between routers R1 and R3, and the synchronization must be turned on.


    参考答案：E

  • 第16题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is provided.()

    A. The peer group shortens the EBGP configuration

    B. The peer group shortens the IBGP configuration

    C. All the configured neighbors are in autonomous system 100

    D. Three AS - path filters are applied to each BGP neighbor

    E. Only the outgoing filters are applied to BGP updates


    参考答案：B, C

  • 第17题：

    Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

    A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24

    B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0

    C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable

    D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24


    参考答案：D

  • 第18题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第19题：

    What technique should be used on BGP edge routers to prevent a multi - homed autonomous system from becoming a trans it system?（）

    • A、Advertise with a high MED value all networks that are discovered via external BGP.
    • B、Set the no - export community attribute on all networks that are advertised externally.
    • C、Remove the AS - Path information on all routes in the BGP table pr ior to advertising externally.
    • D、Set the origin code to incomplete for all networks that are discovered via external BGP.
    • E、Only advertise networks externally if they have been discovered via internal BGP.
    • F、Use an outgoing distribution list to filte r all networks not originating from inside the autonomous system.

    正确答案:F

  • 第20题：

    Two routers configured to run BGP have been connected to a firewall， one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer， including the correct BGP session endpoint addresses and the correct BGP session hop-count limit （EBGP multihop）. What is a good first test to see if BGP will work across the firewall？（）

    • A、Attempt to TELNET from the router connected to the inside of the firewall to the router connected to the outside of the firewall. If telnet works， BGP will work， since telnet and BGP both use TCP to transport data.
    • B、Ping from the router connected to the inside interface of the firewall to the router connected to the outside interface of the firewall. If you can ping between them， BGP should work， since BGP uses IP to transport packets.
    • C、There is no way to make BGP work across a firewall without special configuration， so there is no simple test that will show you if BGP will work or not， other than trying to start the peering session.
    • D、There is no way to make BGP work across a firewall.

    正确答案:A

  • 第21题：

    单选题
    What technique should be used on BGP edge routers to prevent a multi - homed autonomous system from becoming a trans it system?（）
    A

    Advertise with a high MED value all networks that are discovered via external BGP.

    B

    Set the no - export community attribute on all networks that are advertised externally.

    C

    Remove the AS - Path information on all routes in the BGP table pr ior to advertising externally.

    D

    Set the origin code to incomplete for all networks that are discovered via external BGP.

    E

    Only advertise networks externally if they have been discovered via internal BGP.

    F

    Use an outgoing distribution list to filte r all networks not originating from inside the autonomous system.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）
    A

    To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50

    B

    Th e router will prefer the shortest autonomous system path

    C

    If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MED

    D

    The router will prefer the route with the lower MED


    正确答案： A
    解析： 暂无解析

  • 第23题：

    多选题
    A router is running BGP and receives more than one route for a particular prefix. Assume all the routes for this prefix have the same attributes. Which three path features would be reasons be for the rou ter to ignore some of the routes and not consider them as candidates for the best path?（）
    A

    paths from an internal BGP (iBGP) neighbor if the local autonomous system (AS) appears in the AS_PATH

    B

    paths for which the NEXT_HOP is inaccess ible

    C

    paths from an external BGP (eBGP) neighbor if the local autonomous system (AS) appears in the AS_PATH

    D

    paths for which the NEXT_HOP is accessible

    E

    paths that are marked as synchronized in the show ip bgp output

    F

    paths that are marked as  not synchronized in the show ip bgp output


    正确答案： D,C
    解析： 暂无解析

相关内容