What is the IPv6 address FF02::2 used for?()A. all routers in a local segmentB. all routers in an autonomous systemC. all hosts in a local segmentD. all hosts in a particular multicast group

题目
What is the IPv6 address FF02::2 used for?()

A. all routers in a local segment

B. all routers in an autonomous system

C. all hosts in a local segment

D. all hosts in a particular multicast group

相似考题

1.An authentication request for a PPP over ATM client has been returned to the router with an address of 255.255.255.254.What does this indicate to the router?()A. A static IP address is used.B. An unnumbered address is used.C. The returned RADIUS address is used.D. The IP address-pool configuration is used.

2.Which address is the IPV6 all-RIP-routers muticast group address that is used by RIPng as the destaionaddress？（）A、FF02：：AB、FF05：：101C、FF02：：9D、FF02：：6

3.哪个IPv6地址是所有路由器组播组？（）A、FF02：：1B、FF02：：2C、FF02：：3D、FF02：：4

4.地址FF02::2属于IPv6的(22)地址类型。A．单播地址(unicast address)B．组播地址(multicast address)C．任意播地址(anycast address)D．广播地址(broadcast address)

参考答案和解析
参考答案：A
更多“What is the IPv6 address FF02::2 used for?() ”相关问题

  • 第1题：

    What is the purpose of a network mask?（）

    • A、It is used to identify the maximum hop count of a subnetwork
    • B、It is used to identify an IP address as either private or public
    • C、It is used to identify the network to which an IP address belongs
    • D、It is used to identify the total number of bits present in an IP address

    正确答案:C

  • 第2题：

    Which of the following is a valid host IPv6 address？ （Choose all that apply.）（）

    • A、ff02：a：b：c：：l/64
    • B、2001：aaaa： 1234：456c： 1/64
    • C、2001：000a：lb2c：：/64
    • D、2fff：f：f：f：：f/64
    • E、ff02：33ab：l：32：：2/128
    • F、2001：bad：2345：a：b：：cef/128

    正确答案:B,D,F

  • 第3题：

    what is anycast address （Ipv6）？


    正确答案:anycast is used for one-to-nearest communication. Anycast is a mechanism that delivers a packet to an anycast address to the nearest node member of the anycast group. An anycast address represents a service rather than a device， and the same address can reside on one or more devices providing the same service.

  • 第4题：

    What is the IPv6 address FF02::2 used for?（）

    • A、all routers in a local segment
    • B、all routers in an autonomous system
    • C、all hosts in a local segment
    • D、all hosts in a particular multicast group

    正确答案:A

  • 第5题：

    工作于IPv6的RIPng发送更新报文使用的组播地址为（）

    • A、FF02：：1
    • B、FF02：：5
    • C、FF02：：6
    • D、FF02：：9

    正确答案:D

  • 第6题：

    What is the purpose of a network mask?（）

    • A、It is used to identify the maximum hop count of a subnetwork.
    • B、It is used to identify an IP address as either private or public.
    • C、It is used to identify the network to which an IP address belongs.
    • D、It is used to identify the total number of bits present in an IP address.

    正确答案:C

  • 第7题：

    单选题
    You work as an administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers in the ABC.com domain， including domain controllers， have Windows Server 2012 R2 installed. Only IPV4 addresses are currently used on ABC.com. You are required need to configure a server named ABC_SR12 with a private， routable IPv6 address.The IPv6 address must not be used on the IPv4 network. Which of the following is the best option to use？（）
    A

    You should use an address with the FE80：：/64 prefix.

    B

    You should use an address with the FEC0：：/10 prefix.

    C

    You should use an address with the 2002：：/16 prefix.

    D

    You should use an address with the FF02：：/48 prefix.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？ （）
    A

     The Layer 2 multicast address of the destination node

    B

     The solicited node multicast address of the destination node

    C

     The Layer 2 address of the destination node based on the destination IPv6 address

    D

     The IPv6 address of the destination node based on the destination Layer 2 address


    正确答案： B
    解析： 暂无解析

  • 第9题：

    问答题
    what is anycast address （Ipv6）？

    正确答案： anycast is used for one-to-nearest communication. Anycast is a mechanism that delivers a packet to an anycast address to the nearest node member of the anycast group. An anycast address represents a service rather than a device， and the same address can reside on one or more devices providing the same service.
    解析： 暂无解析

  • 第10题：

    单选题
    Which address is the IPV6 all-RIP-routers muticast group address that is used by RIPng as the destaion address?（）
    A

    FF02：：A

    B

    FF05：：101

    C

    FF02：：9

    D

    FF02：：6


    正确答案： C
    解析： 暂无解析

  • 第11题：

    多选题
    You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com.All servers in the ABC.com domain， including domain controllers， have Windows Server 2012 R2 installed.Only IPV4 addresses are currently used on ABC.com.You are required need to configure a server named ABC_SR03 with a private，routable IPv6 address and a server named ABC_SR04 with a multicast IPv6 address.The IPv6 addresses must not be used on the IPv4 network.Which of the following is the best option to use？（）
    A

    You should use an address with the FE80：： prefix on ABC_SR03.

    B

    You should use an address with the FEC0：： prefix on ABC_SR03.

    C

    You should use an address with the 2002：： prefix on ABC_SR03.

    D

    You should use an address with the FF02：： prefix on ABC_SR03.

    E

    You should use an address with the FE80：： prefix on ABC_SR04.

    F

    You should use an address with the FF02：： prefix on ABC_SR04.


    正确答案： D,C
    解析： 暂无解析

  • 第12题：

    单选题
    What is the purpose of a network mask?（）
    A

    It is used to identify the maximum hop count of a subnetwork.

    B

    It is used to identify an IP address as either private or public.

    C

    It is used to identify the network to which an IP address belongs.

    D

    It is used to identify the total number of bits present in an IP address.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    what’s the role of link-address in Ipv6，is it necessary， why？


    正确答案: It is necessary.
    （1）Link-local addresses are used in the neighbor discovery protocol and the stateless autoconfiguration process.
    （2）routing protocols use link-local address as source address to send routing message.

  • 第14题：

    What is known as "one-to-nearest" addressing in IPv6?（）

    • A、global unicast
    • B、anycast
    • C、multicast
    • D、unspecified address

    正确答案:B

  • 第15题：

    Which address is the IPV6 all-RIP-routers muticast group address that is used by RIPng as the destaion address?（）

    • A、FF02::A
    • B、FF05::101
    • C、FF02::9
    • D、FF02::6

    正确答案:C

  • 第16题：

    During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？（）

    • A、The Layer 2 multicast address of the destination node
    • B、The solicited node multicast address of the destination node
    • C、The Layer 2 address of the destination node based on the destination IPv6 address
    • D、The IPv6 address of the destination node based on the destination Layer 2 address

    正确答案:C

  • 第17题：

    An authentication request for a PPP over ATM client has been returned to the router with an address of 255.255.255.254. What does this indicate to the router?（）

    • A、A static IP address is used.
    • B、An unnumbered address is used.
    • C、The returned RADIUS address is used.
    • D、The IP address-pool configuration is used.

    正确答案:D

  • 第18题：

    单选题
    During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？（）
    A

    The Layer 2 multicast address of the destination node

    B

    The solicited node multicast address of the destination node

    C

    The Layer 2 address of the destination node based on the destination IPv6 address

    D

    The IPv6 address of the destination node based on the destination Layer 2 address


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    An authentication request for a PPP over ATM client has been returned to the router with an address of 255.255.255.254. What does this indicate to the router?（）
    A

    A static IP address is used.

    B

    An unnumbered address is used.

    C

    The returned RADIUS address is used.

    D

    The IP address-pool configuration is used.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    问答题
    what’s the role of link-address in Ipv6，is it necessary， why？

    正确答案： It is necessary.
    （1）Link-local addresses are used in the neighbor discovery protocol and the stateless autoconfiguration process.
    （2）routing protocols use link-local address as source address to send routing message.
    解析： 暂无解析

  • 第21题：

    单选题
    Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network. You need to ensure that the server can communicate with all segments on the IPv6 network. What should you do？ （）
    A

     Configure the IPv6 address as fd00：：2b0：d0ff：fee9：4143/8

    B

     Configure the IPv6 address as fe80：：2b0：d0ff：fee9：4143/64

    C

     Configure the IPv6 address as ff80：：2b0：d0ff：fee9：4143/64

    D

     Configure the IPv6 address as 0000：：2b0：d0ff：fee9：4143/64


    正确答案： A
    解析： 暂无解析

  • 第22题：

    多选题
    The network administrator has been asked to give reasons for moving from ipv4 to ipv6. what are two validreasons for adopting ipv6 over ipv4？（）
    A

    telnet access does not require a password

    B

    nat

    C

    no broadcast

    D

    chanage of destination address in the ipv6 header

    E

    chanage of source address in the ipv6 header

    F

    autoconfiguration


    正确答案： D,B
    解析： 暂无解析

  • 第23题：

    单选题
    What is the purpose of a network mask?（）
    A

    It is used to identify the maximum hop count of a subnetwork

    B

    It is used to identify an IP address as either private or public

    C

    It is used to identify the network to which an IP address belongs

    D

    It is used to identify the total number of bits present in an IP address


    正确答案： D
    解析： 暂无解析

相关内容