Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100.Which of the follo

题目

Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100.Which of the following answers correctly identifies a value that feeds into the EIGRP metric calculation？（）

A.Bandwidth of 101,500

B.Bandwidth of about 34,000

C.Bandwidth of 500

D.Delay of 1200

E.Delay of 2010

F.Delay of 20100

相似考题

1.The following output occurs on Router R1. Which of the following cannot be determine d from this output?（）R1 show ip route 180.1.1.0 255.255.255.240Routing entry for 180.1.1.0/28Known via "bgp 2", distance 20, metric 0Tag 3, type externalLast update from 192.168.1.2 00:10:27 agoRouting Descriptor Blocks:* 192.168.1.2, from 19 2.168.1.2, 00:10:27 agoRoute metric is 0, traffic share count is 1AS Hops 2Route tag 3A. The type of BGP peer (iBGP or eBGP) that advertised this route to R1B. R1‘s ASNC. The next - hop router‘s ASND. The AS_Path length

2.On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）A. show ip routeB. show ip eigrp topologyC. show ip ospf topologyD. show ip eigrp topology 10.1.1.0/24

3.Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred?（）A. Subnet numberB. Next - hop router IP address of the routeC. Whether the route is an E1 or E2 routeD. The ro ute‘s tagE. The number of router hops between the router and the subnet

4.Router R1 sets a route tag for subnet 10.1.1.0／24 when redistributing from OSPF into EIGRP.Which of the following unit is assigned to the route tag?()A. Kilobits/seconDB. Tens of microsecondsC. CostD. Hop countE. No unit is assigneD

参考答案和解析

参考答案：C, E

更多“Router R1 is three router hops away from subnet 10.1.1.0／24. According to various show int ”相关问题

第1题：

The following output exists on Router R1, a router internal to area 1. What can you d etermine as true from the output of the show ip ospf database summary command?()

A. The LSA was created by an ABR due to an area range command.
B. The LSA was created by an ASBR due to a summary - address command.
C. If cr eated by an area range command, the best metric for a subordinate subnet on that ABR must have been 11.
D. None of the other answers is correct.

参考答案：D
第2题：

Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24
B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0
C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable
D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24

参考答案：D
第3题：

Which of the following commands will display the name of the IOS image file being used in a Cisco router?()

A. Router# show IOS
B. Router# show version
C. Router# show image
D. Router# show protocols
E. Router# show flash

参考答案：B, E
第4题：

Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100
- A、The output describes the contents of a Type 5 LSA
- B、3.3.3.3 identifies a ro uter as being the router performing redistribution
- C、R1's metric for its best route to reach the router with RID 9.9.9.9 is 100
- D、The router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100
正确答案:D
第5题：

In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?（）
- A、Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.
- B、A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.
- C、A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.
- D、A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.
正确答案:B
第6题：

Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
- A、Subnet number
- B、Next - hop router IP address of the route
- C、Whether the route is an E1 or E2 route
- D、The ro ute's tag
- E、The number of router hops between the router and the subnet
正确答案:E
第7题：

Router R1 needs to be configured to advertise a specific network. Which of the followingcommands would you use if you wanted to advertise the subnet 154.2.1.0 255.255.255.0 to the EBGP neighbors on your subnet？（）
- A、Router （config-router）#network 154.2.1.0
- B、outer （config-router）#network 164.2.1.0
- C、Router （config-router）#network-advertise 154.2.1.0
- D、Router （config-router）#network 154.2.1.0 mask 255.255.255.0
- E、None of the other alternatives apply
正确答案:D
第8题：

Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)
- A、R1 is the router that redistributed the route
- B、R1's metric to reach subnet 10.2.2.0/24 is 64
- C、The route was redistributed on a router that has a router ospf 1 command configured
- D、R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF
正确答案:C
第9题：

Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）
- A、The show ip ospf neighbors command lists two neighbors off Fa0/0.
- B、The show ip ospf neighbors command lists four neighbors off Fa0/0.
- C、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.
- D、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.
正确答案:B,C
第10题：

多选题
What can be determined from the line of show ip route output shown in the exhibit?（）
A
The next routing update can be expected in 35 seconds.
B
The IP address 10.10.10.6 is configured on S0/1.
C
The IP address 10.10.10.8 is configured on S0/1.
D
This route is using the default administrative distance.
E
The 10.10.10.8 network is two hops away from this router.

正确答案： E,C
解析：暂无解析
第11题：

单选题
Router R1 needs to be configured to advertise a specific network. Which of the followingcommands would you use if you wanted to advertise the subnet 154.2.1.0 255.255.255.0 to the EBGP neighbors on your subnet？（）
A
Router （config-router）#network 154.2.1.0
B
outer （config-router）#network 164.2.1.0
C
Router （config-router）#network-advertise 154.2.1.0
D
Router （config-router）#network 154.2.1.0 mask 255.255.255.0
E
None of the other alternatives apply

正确答案： E
解析：暂无解析
第12题：

多选题
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
A
show ip route
B
show ip eigrp topology
C
show ip ospf topology
D
show ip eigrp topology 10.1.1.0/24

正确答案： D,C
解析：暂无解析
第13题：

Refer to the exhibit. EIGRP had converged in AS 1 when the link between router R1 and R2 went down. The console on router R2 generated the following messages:*Mar 20 12:12:06: %DUAL - 5NBRCHANG E: IP - EIGRP 1: Neighbor 10.1.4.3 (Serial0) is down: stuck in active*Mar 20 12:15:23: %DUAL -3- SIA: Route 10.1.1.0/24 stuck - in - active state in IP - EIGRP 1.Cleaning up The network administrator issued the show ip eigrp topology active command on R2 to check the status of the EIGRP network.Which statement best describes the reason for the error messages?（）
A. Incorrect bandwidth configuration on router R3 prevents R2 from establishing neighbor adjacency.
B. Incorrect bandwidth configuration on router R 5 prevents R2 from establishing neighbor adjacency.
C. Router R3 did not reply to the query about network 10.1.1.0/24 sent by router R2 .
D. Router R5 did not reply to the query about network 10.1.1.0/24 sent by router R2 .

参考答案：C
第14题：

Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be derived?()

A. Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24.
B. Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0.
C. Router R1 is waiting for a reply from the neighb or 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable.
D. Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10.6.1.0/24.

参考答案：D
第15题：

What can be determined from the line of show ip route output shown in the exhibit?（）
- A、The next routing update can be expected in 35 seconds.
- B、The IP address 10.10.10.6 is configured on S0/1.
- C、The IP address 10.10.10.8 is configured on S0/1.
- D、This route is using the default administrative distance.
- E、The 10.10.10.8 network is two hops away from this router.
正确答案:D,E
第16题：

Which of the following commands will display the name of the IOS image file being used in a Cisco router?（）
- A、Router# show IOS
- B、Router# show version
- C、Router# show image
- D、Router# show protocols
- E、Router# show flash
正确答案:B,E
第17题：

On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
- A、show ip route
- B、show ip eigrp topology
- C、show ip ospf topology
- D、show ip eigrp topology 10.1.1.0/24
正确答案:A,C
第18题：

Which command will configure a default route on a router?（）
- A、router(config)# ip route 0.0.0.0 10.1.1.0 10.1.1.1
- B、router(config)# ip default-route 10.1.1.0
- C、router(config)# ip default-gateway 10.1.1.0
- D、router(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1
正确答案:D
第19题：

A network administrator has configured access list 172 to prevent Telnet and ICMP traffic from reaching a server with the address if 192.168.13.26. Which command can the administrator issue to verify that the access list is working properly?（）
- A、Router# ping 192.168.13.26
- B、Router# debug access-list 172
- C、Router# show open ports 192.168.13.26
- D、Router# show access-list
- E、Router# show ip interface
正确答案:A,D,E
第20题：

Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100. Which of the following answers correctly identifies a value that feeds into the EIGRP metric calculation？（）
- A、Bandwidth of 101,500
- B、Bandwidth of about 34,000
- C、Bandwidth of 500
- D、Delay of 1200
- E、Delay of 2010
- F、Delay of 20100
正确答案:C,E
第21题：

什么命令序列将配置一个路由器运行OSPF，并添加网络10.1.1.0/24 area0？（）
- A、router ospf area 0 network 10.1.1.0 255.255.255.0 area 0
- B、router ospf network 10.1.1.0 0.0.0.255
- C、router ospf 1 network 10.1.1.0 0.0.0.255 area 0
- D、router ospf area 0 network 10.1.1.0 0.0.0.255 area 0
- E、router ospf network 10.1.1.0 255.255.255.0 area 0
- F、router ospf 1 network 10.1.1.0 0.0.0.255
正确答案:D
第22题：

单选题
Router R1 sets a route tag for subnet 10.1.1.0/24 when redistributing from OSPF into EIGRP.Which of the following unit is assigned to the route tag?（）
A
Kilobits/seconD
B
Tens of microseconds
C
Cost
D
Hop count
E
No unit is assigneD

正确答案： D
解析：暂无解析
第23题：

多选题
Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）
A
The show ip ospf neighbors command lists two neighbors off Fa0/0.
B
The show ip ospf neighbors command lists four neighbors off Fa0/0.
C
The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.
D
The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.

正确答案： C,A
解析：暂无解析
第24题：

单选题
Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
A
Subnet number
B
Next - hop router IP address of the route
C
Whether the route is an E1 or E2 route
D
The ro ute's tag
E
The number of router hops between the router and the subnet

正确答案： A
解析：暂无解析

Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100.Which of the follo

题目

相似考题

参考答案和解析

更多“Router R1 is three router hops away from subnet 10.1.1.0／24. According to various show int ”相关问题

相关内容