Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?()A. TK1#show ip eigrp adjacencyB. TK1#show ip eigrp topologyC. TK1#show ip eigrp interfac

题目

Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?()

A. TK1#show ip eigrp adjacency

B. TK1#show ip eigrp topology

C. TK1#show ip eigrp interfaces

D. TK1#show ip eigrp neighbors

E. None of the above

相似考题

1.A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）A. show ip eigrp topologyB. show ip eigrp topology all - linksC. show ip route eigrpD. show ip route eigrp all - linksE. show ip eigrp topology all - learned

2.Routers R1 and R2, currently EIGRP neighbors over their Fa0/0 interfaces (respectively),both use EIGRP authentication. Tuesday at 8 p.m. the neighborship fails.Which of the following wo uld not be useful when investigating whether authenticationhad anything to do with the failure？（）A. debug eigrp packetB. show key chainC. show ip eigrp neighbor failureD. show clock

3.Which command will display EIGRP packets sent and received, as well as statistics on hello packets, updates, queries, replies, and acknowledgments?()A. debug eigrp packetsB. show ip eigrp trafficC. debug ip eigrpD. show ip eigrp interfaces

4.Which command will display all the EIGRP feasible successor routes known to a router?()A. Router# show ip eigrp routes *B. Router# show ip eigrp summaryC. Router# show ip eigrp topologyD. Router# show ip eigrp adjacenciesE. Router# show ip eigrp neighbors detail

更多“Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?() ”相关问题

第1题：

A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）
A. Router# show ip eigrp adjacency
B. Router# show ip eigrp topology
C. Router# show ip eigrp interfaces
D. Router# show ip eigrp neighbors

参考答案：D
第2题：

Which command will display all the EIGRP feasible successor routes known to a router?（）
- A、Router# show ip eigrp routes *
- B、Router# show ip eigrp summary
- C、Router# show ip eigrp topology
- D、Router# show ip eigrp adjacencies
- E、Router# show ip eigrp neighbors detail
正确答案:C
第3题：

A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）
- A、Router# show ip eigrp adjacency
- B、Router# show ip eigrp topology
- C、Router# show ip eigrp interfaces
- D、Router# show ip eigrp neighbors
正确答案:D
第4题：

Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）
- A、debug ip routing
- B、show running-config
- C、show ip route protocols
- D、show ip protocols
- E、show protocols al
正确答案:B,D
第5题：

Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）
- A、By adding all subnets listed by the show ip route connected command
- B、By adding the subnets of working interfaces over which static neighbors have been defined
- C、By adding subnets redistributed on the local router from another routing source
- D、By adding all subnets listed by the show ip route static command
正确答案:B,C
第6题：

Routers R1 and R2, currently EIGRP neighbors over their Fa0/0 interfaces (respectively),both use EIGRP authentication. Tuesday at 8 p.m. the neighborship fails. Which of the following wo uld not be useful when investigating whether authenticationhad anything to do with the failure？（）
- A、debug eigrp packet
- B、show key chain
- C、show ip eigrp neighbor failure
- D、show clock
正确答案:C
第7题：

单选题
Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?（）
A
TK1#show ip eigrp adjacency
B
TK1#show ip eigrp topology
C
TK1#show ip eigrp interfaces
D
TK1#show ip eigrp neighbors
E
None of the above

正确答案： D
解析：暂无解析
第8题：

多选题
Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）
A
R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
B
R1 can send IP packets to R2, but R2 cannot send IP packets to R1
C
R2 no longer learns EIGRP routes from R1 for routes not connected to R1
D
R1 no longer replies to R2's Query messages
E
R2n o longer sends to R1 Query messages

正确答案： A,B
解析：暂无解析
第9题：

单选题
Which command will display all the EIGRP feasible successor routes known to a router?（）
A
Router# show ip eigrp routes *
B
Router# show ip eigrp summary
C
Router# show ip eigrp topology
D
Router# show ip eigrp adjacencies
E
Router# show ip eigrp neighbors detail

正确答案： E
解析：暂无解析
第10题：

多选题
Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）
A
By adding all subnets listed by the show ip route connected command
B
By adding the subnets of working interfaces over which static neighbors have been defined
C
By adding subnets redistributed on the local router from another routing source
D
By adding all subnets listed by the show ip route static command

正确答案： B,C
解析：暂无解析
第11题：

单选题
Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）
A
The show ip eigrp neighbors command on R1 lists the revised Hello timer
B
The show ip eigrp interfaces command on R1 lists the revised Hello timer
C
The R1 - R2 neighborship fails due to Hello timer mismatcH
D
The show ip eigrp interfaces detail command on R1 lists the revised Hello timer

正确答案： D
解析：暂无解析
第12题：

单选题
A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）
A
show ip eigrp topology
B
show ip eigrp topology all - links
C
show ip route eigrp
D
show ip route eigrp all - links
E
show ip eigrp topology all - learned

正确答案： B
解析：暂无解析
第13题：

Which of the following settings could prevent two potential EIGRP neighbors from becoming neighbors?（）
- A、The i nterface used by one router to connect to the other router is passive in the EIGRP process.
- B、Duplicate EIGRP router IDs.
- C、Mismatched Hold Timers.
- D、IP addresses of 10.1.1.1/24 and 10.2.2.2/24, respectively.
正确答案:A,D
第14题：

Router R1 has been configured with the commands rout er eigrp 9 and network 172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1's (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode. Which of the following occurs？（）
- A、Fa0/0 fails
- B、The command is rejecteD
- C、The existing three neighbors fail
- D、The neighborship with 172.16.2.20 fails and then reestablishes
- E、None of the other answers is correct
正确答案:C
第15题：

Which of the following commands shows all routes learned via EIGRP？（Choose all that apply.）（）
- A、show ip eigrp topology
- B、show ip eigrp adjacency
- C、show ip eigrp routes
- D、show ip eigrp database
- E、show ip route eigrp
- F、show ip eigrp forwarding
正确答案:A
第16题：

Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?（）
- A、TK1#show ip eigrp adjacency
- B、TK1#show ip eigrp topology
- C、TK1#show ip eigrp interfaces
- D、TK1#show ip eigrp neighbors
- E、None of the above
正确答案:D
第17题：

Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）
- A、The show ip eigrp neighbors command on R1 lists the revised Hello timer
- B、The show ip eigrp interfaces command on R1 lists the revised Hello timer
- C、The R1 - R2 neighborship fails due to Hello timer mismatcH
- D、The show ip eigrp interfaces detail command on R1 lists the revised Hello timer
正确答案:D
第18题：

A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）
- A、show ip eigrp topology
- B、show ip eigrp topology all - links
- C、show ip route eigrp
- D、show ip route eigrp all - links
- E、show ip eigrp topology all - learned
正确答案:B
第19题：

单选题
EIGRP uses five generic packet types （hello， updates， queries， replies， acknowledgements）. If youwished to view the statistics for these packets， which IOS command should you use？（）
A
debug eigrp packets
B
show ip eigrp traffic
C
show ip eigrp topology
D
show ip eigrp neighbors

正确答案： C
解析：暂无解析
第20题：

单选题
Which of the following commands shows all routes learned via EIGRP？（Choose all that apply.）（）
A
show ip eigrp topology
B
show ip eigrp adjacency
C
show ip eigrp routes
D
show ip eigrp database
E
show ip route eigrp
F
show ip eigrp forwarding

正确答案： C
解析：暂无解析
第21题：

多选题
Which of the following settings could prevent two potential EIGRP neighbors from becoming neighbors?（）
A
The i nterface used by one router to connect to the other router is passive in the EIGRP process.
B
Duplicate EIGRP router IDs.
C
Mismatched Hold Timers.
D
IP addresses of 10.1.1.1/24 and 10.2.2.2/24, respectively.

正确答案： B,D
解析：暂无解析
第22题：

单选题
Which command will display EIGRP packets sent and received, as well as statistics on hello packets, updates, queries, replies, and acknowledgments?（）
A
debug eigrp packets
B
show ip eigrp traffic
C
debug ip eigrp
D
show ip eigrp interfaces

正确答案： C
解析：暂无解析
第23题：

多选题
Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）
A
debug ip routing
B
show running-config
C
show ip route protocols
D
show ip protocols
E
show protocols al

正确答案： A,D
解析：暂无解析

Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?()A. TK1#show ip eigrp adjacencyB. TK1#show ip eigrp topologyC. TK1#show ip eigrp interfac

题目

相似考题

更多“Which one of the following EIGRP commands can check the IP addresses of the adjacent neighbors, as well as verifying the EIGRP retransmit intervals and queue counts?() ”相关问题

相关内容